Hilux 4x4 Forum

I used instructions from the Aussie forum http://www.newhilux.net" onclick="window.open(this.href);return false; to do my mod so here are some pics; Remove the back seat, IMG_2950.JPG I used masking tape to mark the cutting lines to leave 43mm after the cut; IMG_2952.JPG Ready to cut; IMG_...

Thank you to all for your thank you's and compliments. I wanted to try and give something back to make up for all the assistance and creativity I've received from the forum. Jo, baie jammer vir die lang vertraging, ek het nou net na hierdie thread terug gekeer. The 98mm holesaw was just right. A 95m...

Now it was time to prepare for painting the holes for rust prevention. Primer and Duco 17 Painting.jpg After that the last two rivnuts were put in 18 Rivnuts.jpg and the snorkel bolted on. Loads of silicon was used around anywhere that water or dust could ingress. 19 Bolt on.jpg Finally, put the air...

EINA! 13 The hole.jpg Now, for the next 6 holes. The guys who have already done this are right, the template hole marks are not correct. I found that the one at 10 o’clock did match and the one at 8 o’clock nearly did but the others didn’t so, as advised by others, I put a tiny bit of blue tack cove...

and then one can see where the S pipe comes into the engine compartment 9 Snorkel inlet.jpg and here is the throw away piece that was attached to the air filter inlet inside the fender 10 Spare pipe.jpg and this is how the S pipe will fit onto the air filter inlet 11 S pipe to Filter.jpg I was now c...

This is a metal disc called Eina 1 Eina.jpg and here is it’s story; I bought one of Pieter’s snorkels last year for my 3.0 D-4D but only got round to fitting it last week. I must say Heinrich’s thread http://www.hilux4x4.co.za/views/viewtopic.php?f=94&t=14312&hilit=fitting+snorkel" oncl...