Search found 79 matches
- Fri Feb 05, 2021 9:23 am
- Forum: The Workshop
- Topic: 22R Misfire
- Replies: 1
- Views: 802
22R Misfire
Good day Gents, My 1996 SFA 2.4 started to idle very ruff and its over fueling. It drives fine but at idle it sounds like its cammed and wants to switch off, you can also smell the fuel. It only has 114 000km and i hardly use it but i done my regular minor service (filters, oil) and after about a we...
- Thu Sep 15, 2016 3:18 pm
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: Ironman suspension upgrade
- Replies: 5
- Views: 2424
Re: Ironman suspension upgrade
Vigo rear leafsprings will be too long for the front. A common mod is to put the SFA rear leafsprings upfront which pushes the diff 2inches forward(perfect for 33inch tyres or bigger) but you need cross over steering and a dropped spring hanger. For the rear you use IFS rear leafsprings and 200mm lo...
- Wed Sep 07, 2016 2:11 pm
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: Ironman suspension upgrade
- Replies: 5
- Views: 2424
Ironman suspension upgrade
Hi Gents, Anyone have experience with the Ironman 4x4 suspension upgrade on an SFA? Lobiz4x4 has a very good deal on at the moment and its very tempting! <iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2FLobiz4x4%2Fposts%2F651847968318032&width=500...
- Tue May 24, 2016 6:47 am
- Forum: The Workshop
- Topic: Play in front drivetrain
- Replies: 3
- Views: 921
Re: Play in front drivetrain
Thanks Mud Dog! So do I put the gearlever and transfercase lever both in neutral? or just the gearlever? lock hubs and rotate back and fro. Torque rod is still there. Suspension is standard since it left the factory in 1996 and vehicle has 110 000km on the clock. Last week went playing in the mud an...
- Mon May 23, 2016 10:17 pm
- Forum: The Workshop
- Topic: Play in front drivetrain
- Replies: 3
- Views: 921
Play in front drivetrain
Hi,
Had the rear propshaft out on my SFA and took vehicle in for a spin in FWD but whenever I accelerate I get a rocking thumping sound. The same happens when I release the accelerator pedal.
Is it due to worn out bushes or mounts?
Regards
Had the rear propshaft out on my SFA and took vehicle in for a spin in FWD but whenever I accelerate I get a rocking thumping sound. The same happens when I release the accelerator pedal.
Is it due to worn out bushes or mounts?
Regards
- Tue May 10, 2016 8:42 am
- Forum: The Workshop
- Topic: Gearmax m80 rear oil seal
- Replies: 0
- Views: 1175
Gearmax m80 rear oil seal
Good Day Gents, Hope all the members are well. Went playing at Dust&Dirt on the weekend and after parking the vehicle at home I saw oil on the driveway. Its leaking from from the rear diff at the back, where the prop meets. Is it just a simple job of removing the rear prop and and u-joint flange...
- Tue Nov 10, 2015 3:14 pm
- Forum: The Workshop
- Topic: Hilux 2.7L/3RZ Gearbox
- Replies: 3
- Views: 2329
Re: Hilux 2.7L/3RZ Gearbox
I speak under correction SFA 4Y - G52 (takes gear driven tc) 22R - G52 (take gear driven tc) IFS 2.7 - W56 (takes gear driven tc) Stronger than G52 KZTE- R151 (takes gear driven tc) Stronger than W56 Vigo 2.7 - W59 (takes chain driven tc) almost some as W56 but for chain driven tc D4D - R150 (takes ...
- Tue Sep 15, 2015 10:18 pm
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: Monroe Shock Part#
- Replies: 5
- Views: 2123
Monroe Shock Part#
Using the Monroe catalogue I compiled this table. This is for the Monroe Gas Magnum shocks.
- Thu Aug 27, 2015 5:02 pm
- Forum: Pictures Only - Post a pic of your Hilux
- Topic: My Vis trok!
- Replies: 8
- Views: 5438
Re: My Vis trok!
Congratz Quintin,
You were behind me at the Caltex(Okavango) car wash on Sunday. I was in the white SFA. You van looks neat!
You were behind me at the Caltex(Okavango) car wash on Sunday. I was in the white SFA. You van looks neat!
- Mon Aug 24, 2015 8:38 am
- Forum: The Workshop
- Topic: Advice on Kzte Ball joint replacement
- Replies: 4
- Views: 1843
Re: Advice on Kzte Ball joint replacement
We recently had to replace the ball joints on our Isuzu. Agents prices was very steep so opted for Partquip. Purchased the Partquip balljoints but was advised not to install them as worm oem balljoints are safer than Partquip. Oem develop play but Partquip tend to break. Was then advised to get a se...
- Fri Aug 21, 2015 6:21 pm
- Forum: Open Discussion
- Topic: The "Character" of a forum
- Replies: 9
- Views: 1757
Re: The "Character" of a forum
I log on almost everyday just to check whats going on. Always enjoy the forum. The forum sometimes seems quiet but I think that's because those who post, post about relevant things and just not random stuff. You get a feeling of respect between members by the way they reply :thumbup: One suggestion ...
- Thu Aug 06, 2015 11:53 pm
- Forum: The Workshop
- Topic: Preferred replacement engine for sfa 22r engine
- Replies: 43
- Views: 8781
Re: Preferred replacement engine for sfa 22r engine
Or look at the Isuzu 4jb1t 2.8 diesel. Very reliable motor and lighter on diesel than the Mazda WL. Also now that the Chinese use the exact motor in the JMC bakkies spares should be easy to come by for a long time.
- Mon Jun 15, 2015 10:37 pm
- Forum: Late 2005 - 2016 Hilux (Gen 6 aka Vigo-shape)
- Topic: Teflon Suspension Spacers...?
- Replies: 7
- Views: 2361
Re: Teflon Suspension Spacers...?
Looks good! Did you have to take the strut apart to insert longer bolts?
- Mon Jun 08, 2015 10:27 am
- Forum: The Workshop
- Topic: Sludge buildup in engine, what now?
- Replies: 24
- Views: 4388
Re: Sludge buildup in engine, what now?
That looks really bad. The previous owner must of never serviced the vehicle. That's past the sludge stage and looks like it has formed a tar like substance. I've watched videos on oil tests and oil only does that when subjected to extreme heat or extremely long duration of time without change. Perh...
- Mon Jun 08, 2015 10:17 am
- Forum: General Hilux Discussions
- Topic: FJ mags op SFA
- Replies: 6
- Views: 2095
Re: FJ mags op SFA
Its not going to look complete because you can't attach the front centre caps. SFA looks best with steel rims or mags from that era IMHO.
- Fri May 22, 2015 4:54 pm
- Forum: The Workshop
- Topic: Hilux 3.0d4d clutch replacement
- Replies: 20
- Views: 7919
Re: Hilux 3.0d4d clutch replacement
According to people who pulled at the original clutch its stamped LUK. I thick Toyota SA decided to use LUK clutches on the production line. Now according to someone who purchased a SACHS clutch it had AISIN stamped on it which leads me to believe SACHS is the OEM producer for Toyota. Another friend...
- Wed May 20, 2015 8:14 pm
- Forum: The Workshop
- Topic: Hilux 3.0d4d clutch replacement
- Replies: 20
- Views: 7919
Re: Hilux 3.0d4d clutch replacement
Hi Raider posting pics of Toyota service bulletins on an open forum can lead to the dismissal of staff and/or legal action against poster. So please be careful these bulletins are there to help Toyota staff to perform the repairs to the highest standards. I'm not sure how it leads to dismissal of s...
- Wed May 20, 2015 5:11 pm
- Forum: The Workshop
- Topic: Hilux 3.0d4d clutch replacement
- Replies: 20
- Views: 7919
Re: Hilux 3.0d4d clutch replacement
Photo of bulletin removed.
- Wed May 20, 2015 5:02 pm
- Forum: The Workshop
- Topic: Hilux 3.0d4d clutch replacement
- Replies: 20
- Views: 7919
Hilux 3.0d4d clutch replacement
I complained to Toyota about my clutch at 39500km(warranty on clutch is till 40000km). They were at first hesitant to change it but I explained to them that the clutch is faulty as I have driven two 3.0 D4D's in the past and know how it should feel. They removed the clutch and sent TSA pictures requ...
- Wed Apr 01, 2015 11:28 am
- Forum: Western Cape
- Topic: Outrekpad this weekend - 29th?
- Replies: 27
- Views: 7751
Re: Outrekpad this weekend - 29th?
never been out with the Hilux club yet :cry: seriously need to make a plan! :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: Then you have to come along with us. We are usually the same people and always have fun. Feel free to g...
- Tue Mar 31, 2015 5:46 pm
- Forum: Open Discussion
- Topic: Immaculate Prado 90 V6
- Replies: 13
- Views: 2067
Re: Immaculate Prado 90 V6
Any idea if it's petrol or diesel? Its a 3.4 v6 auto. I know the previous owners VERY well.This vehicle has never ever seen off road.No bodywork done(Besides the one arch came off and they had that resprayed).It was a old mans car(Seriously)bought a New F30 and M4 Coupe. Let me guess the front pass...
- Tue Mar 31, 2015 4:12 pm
- Forum: Open Discussion
- Topic: Immaculate Prado 90 V6
- Replies: 13
- Views: 2067
Immaculate Prado 90 V6
Let me just say I have nothing yo do with this sale, just thought forum members would be interested. Went to go drop of my dad's BMW at Forsdicks Tygervalley yesterday and saw this beauty parked outside. For them to be selling a 1997 model car already tells you its a clean car. Inside and out is imm...
- Tue Mar 31, 2015 3:47 pm
- Forum: Western Cape
- Topic: Outrekpad this weekend - 29th?
- Replies: 27
- Views: 7751
Re: Outrekpad this weekend - 29th?
never been out with the Hilux club yet seriously need to make a plan!
- Tue Mar 31, 2015 3:12 pm
- Forum: Open Discussion
- Topic: Guard dog
- Replies: 28
- Views: 3546
Re: Guard dog
This is my boy. Took him to the vet in the week because he has gum disease were it grows over his teeth(common in boxers). The vet was shocked to hear his 8 years old. Still a healthy 34kg!
- Tue Mar 31, 2015 3:02 pm
- Forum: Open Discussion
- Topic: Guard dog
- Replies: 28
- Views: 3546
Re: Guard dog
Also just wanted to add, when we walk our dogs, some people cross over to the other side of the street, and nobody stands close to our gate, also no intruders since we've had our boxers, they look mean.... but are fantastic with all children that have come to visit, including my 3 yr old granddaugh...
- Thu Mar 26, 2015 4:47 pm
- Forum: Open Discussion
- Topic: Guard dog
- Replies: 28
- Views: 3546
Re: Guard dog
I'm leaning towards a Boerboel at the moment(proudly South African haha), but if a nice Bullmastiff comes my way I might go that route. Been looking on gumtree at the moment, don't need papers or champion bloodline. Just need a healthy pup from parents that have a good a temperament .
- Wed Mar 25, 2015 11:49 pm
- Forum: Open Discussion
- Topic: Guard dog
- Replies: 28
- Views: 3546
Guard dog
Gents, My boxer is now 8 years old so I need to get another dog as he is not as vigilant as before. This is my second boxer and he has been exceptional. Since owning him we have had not one break in, compared in the past. People always wave and kids shout, "there is there toyota dog" whene...
- Wed Mar 25, 2015 11:28 pm
- Forum: Open Discussion
- Topic: Chinese government ask Landy to recall Evoque
- Replies: 18
- Views: 2914
Re: Chinese government ask Landy to recall Evoque
Well then they should recall 99% of their exports! I'm sorry if this sounds racist and I know I'm generalizing but the chinese are a rubbish nation. They might be one of the fastest growing economies but they produce pathetic quality items. They are arrogant and don't have business principles. Also ...
- Mon Mar 23, 2015 3:57 pm
- Forum: Open Discussion
- Topic: My new project SFA S/C 2.2
- Replies: 37
- Views: 4161
Re: My new project SFA S/C 2.2
While you at it i would suggest removing the fenders and panel below the windscreen to access the water run off chanel. Its prone to rusting if not already. Spray it with Dura Bak or similar.
- Sun Mar 22, 2015 11:40 pm
- Forum: Build your own:
- Topic: My Hilux Rebuild - pic heavy
- Replies: 58
- Views: 17115
Re: My Hilux Rebuild - pic heavy. Updated 21/03/2015
Awesome
That looks like a Mikem suspension setup?
That looks like a Mikem suspension setup?
- Fri Mar 20, 2015 11:56 am
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: 31" VS 32"
- Replies: 10
- Views: 2166
Re: 31" VS 32"
I personally have 31" Cooper STT's but will move over the 33" they are finished. Also what is the purpose of your vehicle. Is it a daily drive or a weekend toy? If its a weekend toy then why not sacrifice some fuel consumption for capability? But wait for replies from people that have the ...
- Fri Mar 20, 2015 11:48 am
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: 31" VS 32"
- Replies: 10
- Views: 2166
Re: 31" VS 32"
I'm not sure of 32" but when I spoke to Dino at Burnco a while back he highly recommended 33" over 31". His reason being it transform the SFA Hilux altogether. Makes it much more capable offroad. He owned a 2.4 SFA himself and according to him he got better fuel consumption as 33"...
- Mon Mar 02, 2015 8:31 pm
- Forum: Open Discussion
- Topic: Anyone near Parrow?
- Replies: 4
- Views: 886
Re: Anyone near Parrow?
I can also assist if you don't come right. Can collect most days between 1-5pm and will post from Parow post office.
- Tue Feb 24, 2015 3:21 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: Nog n Lexus in n SFA
- Replies: 89
- Views: 23262
Re: Nog n Lexus in n SFA
With regards to the fan blades and radiator, is it not dangerous to have them so close together. Surely on start up and heavy acceleration the engine mounts tend to flex and the engine moves a small amount?
Regards
Zubair
Regards
Zubair
- Sun Oct 12, 2014 10:54 am
- Forum: Meet the People
- Topic: Hiluxer's that you meet unexpectedly!
- Replies: 127
- Views: 68341
Re: Hiluxer's that you meet unexpectedly!
Saw this fellow Hilux members vehicle parked at Kirstenbosch Botanical Gardens this morning. Was excited to spot someone in the south haha
- Sat Jun 14, 2014 4:00 pm
- Forum: Members' Vehicles
- Topic: Hilux Raider 1996 S/C
- Replies: 20
- Views: 8433
Re: Hilux Raider 1996 S/C
Thanks gents, every time I look at her she makes me smile :)
Next mod is extended shackles front and rear.
Next mod is extended shackles front and rear.
- Wed Jun 11, 2014 8:40 am
- Forum: Members' Vehicles
- Topic: Hilux Raider 1996 S/C
- Replies: 20
- Views: 8433
Re: Hilux Raider 1996 S/C
Finally got around to putting the black steelies on. I must say it gives the Hilux a much more aggressive look!
- Fri Jun 06, 2014 5:41 pm
- Forum: The Workshop
- Topic: Gearmax diff ring and pinion swap
- Replies: 12
- Views: 1853
Re: Gearmax diff ring and pinion swap
My intention was to run 30mm spacers on all fours, but since the IFS rear diff is +-60mm wider than the SFA rear diff I was hoping to kill two birds with one stone by buying a 2nd hand diff with diff-loc and just install spacers at the front. Looks like its better to just have a diff-loc installed i...
- Thu Jun 05, 2014 5:16 pm
- Forum: The Workshop
- Topic: Gearmax diff ring and pinion swap
- Replies: 12
- Views: 1853
Gearmax diff ring and pinion swap
Gents,
Can I swap my rear ring&pinion from a local Gearmax M80 diff (SFA Shape) into the rear Gearmax diff of the IFS shape? What code diff did they come with M8??
I want to buy a local diff with diff-loc from the IFS shape but most are only 4.55 ratio and I need 4.88.
Regards.
Can I swap my rear ring&pinion from a local Gearmax M80 diff (SFA Shape) into the rear Gearmax diff of the IFS shape? What code diff did they come with M8??
I want to buy a local diff with diff-loc from the IFS shape but most are only 4.55 ratio and I need 4.88.
Regards.
- Thu Jun 05, 2014 12:20 pm
- Forum: General Hilux Discussions
- Topic: 1 Hour Tyre Change
- Replies: 6
- Views: 4018
Re: 1 Hour Tyre Change
I had a similar problem a while back. I can't understand why toyota didn't put a locating funnel for the hoist like they done on the old SFA Hilux. That van is almost 20years old and its still easier to change the tyre.
- Tue May 20, 2014 2:23 pm
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: low cross-over steer
- Replies: 3
- Views: 1271
low cross-over steer
Hi gents, Since the biggest limiting factor to droop/articulation on a SFA Hilux is the shock length and torque rod which is need for for the push/pull steering system. I would like to change to a cross-over steering but all the kits require lifting your vehicle atleast 3inches. So I was thinking of...
- Sat May 17, 2014 11:25 am
- Forum: The Workshop
- Topic: Steel plate cutting CT
- Replies: 3
- Views: 763
Re: Steel plate cutting CT
Thanks Nicholas, let me work on a drawing first and then I will give you a shout.
Regards
Zubair
Regards
Zubair
- Fri May 16, 2014 12:08 pm
- Forum: The Workshop
- Topic: Steel plate cutting CT
- Replies: 3
- Views: 763
Steel plate cutting CT
Hi Gents,
Anyone know of reasonable place that can cut 10-12mm steel plate without a CAD drawing. It very simple and small stuff. Want to make recovery points.
Regards
Zubair
Anyone know of reasonable place that can cut 10-12mm steel plate without a CAD drawing. It very simple and small stuff. Want to make recovery points.
Regards
Zubair
- Fri May 09, 2014 5:23 pm
- Forum: General Hilux Discussions
- Topic: Gabriel Safari HDP Shocks
- Replies: 19
- Views: 7846
Re: Gabriel Safari HDP Shocks
The rebound or dampening is not adjustable. On the HDP struts the spring cup can be moved up to give you more lift, similar to the Bilstein struts. The HPD dampers are designed more for performance and therefore are set stiffer than your normal damper. Any performance damper will feel stiffer. This ...
- Sat Apr 19, 2014 10:15 am
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: Project Viking
- Replies: 66
- Views: 9140
Re: Project Viking
That workshop
Good luck on the build. Hoping to do something similar in the future so will be keeping a close eye on this
Good luck on the build. Hoping to do something similar in the future so will be keeping a close eye on this
- Fri Apr 11, 2014 6:00 pm
- Forum: 4x2 Hilux's Welcome
- Topic: new hilux dakar vs ranger xls
- Replies: 29
- Views: 9407
Re: new hilux dakar vs ranger xls
We owned a legend40 and now a Dakar. When we traded in the legend40 we actually got change in our pocket after settling the bank. Few vehicles have such good trade/resale and that is what makes a Hilux a good buy. The d4d can be very light on diesel if driven conservatively. With the Dakar model you...
- Mon Feb 17, 2014 9:06 pm
- Forum: Western Cape
- Topic: Welgelegen or Atalntis dunes Sunday 16th
- Replies: 17
- Views: 2839
Re: Welgelegen or Atalntis dunes Sunday 16th
I got there at 10am. Went on a few dunes but the heat was unbearable and Hilux doesn't have aircon. Couldn't take the risk of getting lost or stuck being a noob in that heat. Left like after 30mins.
I done Ou trek pad the week before so atleast I got some 4x4 action.
I done Ou trek pad the week before so atleast I got some 4x4 action.
- Fri Feb 14, 2014 3:33 pm
- Forum: Western Cape
- Topic: Welgelegen or Atalntis dunes Sunday 16th
- Replies: 17
- Views: 2839
Re: Welgelegen or Atalntis dunes Sunday 16th
Managed to get a permit so heading to Atlantis this Sunday. It will be my first time so any tips are welcome.
- Thu Feb 13, 2014 8:53 pm
- Forum: Western Cape
- Topic: Welgelegen or Atalntis dunes Sunday 16th
- Replies: 17
- Views: 2839
Welgelegen or Atalntis dunes Sunday 16th
Hi Gents,
Anyone doing Atlantis dunes or Welgelegen 4x4 trail on Sunday that I can tag along with?
Regards
Zubair
Anyone doing Atlantis dunes or Welgelegen 4x4 trail on Sunday that I can tag along with?
Regards
Zubair
- Thu Feb 13, 2014 5:18 pm
- Forum: Western Cape
- Topic: Ou trekpad night challenge 12-02-14
- Replies: 3
- Views: 1285
Re: Ou trekpad night challenge 12-02-14
I would put your name down but only registered forum members are allowed to drive and I am not allowed to put someones name down for them.
Thats what I was told. Register, it only takes a few mins.
Regards
Zubair
Thats what I was told. Register, it only takes a few mins.
Regards
Zubair
- Thu Feb 06, 2014 12:11 pm
- Forum: Western Cape
- Topic: Ou trekpad night challenge 12-02-14
- Replies: 3
- Views: 1285
Ou trekpad night challenge 12-02-14
Anyone else keen to join?
http://4x4community.co.za/forum/showthread.php?t=175615" onclick="window.open(this.href);return false;
http://4x4community.co.za/forum/showthread.php?t=175615" onclick="window.open(this.href);return false;
- Tue Feb 04, 2014 5:59 pm
- Forum: Open Discussion
- Topic: Snatch rope
- Replies: 25
- Views: 2840
Re: Snatch rope
Ok thank you, next purchase will be a bridle.
- Tue Feb 04, 2014 5:50 pm
- Forum: Open Discussion
- Topic: D-4D ?
- Replies: 5
- Views: 1316
Re: D-4D ?
Direct injection, 4 stroke, Common rail Diesel
http://www.toyota.co.nz/ToyotaTechnology/" onclick="window.open(this.href);return false;
http://www.toyota.co.nz/ToyotaTechnology/" onclick="window.open(this.href);return false;
- Tue Feb 04, 2014 5:46 pm
- Forum: Open Discussion
- Topic: Snatch rope
- Replies: 25
- Views: 2840
Re: Snatch rope
Do you use both holes and a bridle or just one hole?
- Tue Feb 04, 2014 5:37 pm
- Forum: Open Discussion
- Topic: Shock/damper test
- Replies: 1
- Views: 620
Shock/damper test
Here is an interesting article I found on different brands of shocks that were tested.
http://www.raw4x4.com.au/SiteFiles/raw4 ... ro_WEB.pdf" onclick="window.open(this.href);return false;
http://www.raw4x4.com.au/SiteFiles/raw4 ... ro_WEB.pdf" onclick="window.open(this.href);return false;
- Tue Feb 04, 2014 5:28 pm
- Forum: Open Discussion
- Topic: Snatch rope
- Replies: 25
- Views: 2840
Re: Snatch rope
Just some info I found out. Most kinetic rope comes from France although Im sure some Chinaman started copying it already. After it gets imported all they do locally is form the knots on the ends and add a protective sleeve. After that everyone just adds their mark-up. It's called splicing and I di...
- Tue Feb 04, 2014 3:27 pm
- Forum: Open Discussion
- Topic: Snatch rope
- Replies: 25
- Views: 2840
Re: Snatch rope
Just some info I found out. Most kinetic rope comes from France although Im sure some Chinaman started copying it already. After it gets imported all they do locally is form the knots on the ends and add a protective sleeve. After that everyone just adds their mark-up.
- Tue Feb 04, 2014 12:44 pm
- Forum: Open Discussion
- Topic: Snatch rope
- Replies: 25
- Views: 2840
Re: Snatch rope
http://www.ropeworld.co.za/" onclick="window.open(this.href);return false;
- Tue Feb 04, 2014 12:28 pm
- Forum: Open Discussion
- Topic: Snatch rope
- Replies: 25
- Views: 2840
Re: Snatch rope
Its 26mm. Gave Southern Ropes a call now. 24mm is 12t and 26mm is 13t. I asked them for a quote out of interest. 24mm 12t 9m = R800 and no stock of 26mm 13t.
- Tue Feb 04, 2014 12:12 pm
- Forum: Open Discussion
- Topic: Snatch rope
- Replies: 25
- Views: 2840
Re: Snatch rope
Btw they also make 15t snatch rope.