Hilux 4x4 Forum

I have a Vigo 2008 D/c and the drivers seat was making a squeaky noise. I checked all the mounting bolts and they were ok. When we took the seat out, the framework for the rails is welded to some steel framework across the seat. When we twisted the seat we could see the break...you have to look care...

I put one in after seeing other posts. They gave part numbers and pictures. Will have to look on Sat for you as out of signal tomorrow

I HAVE A 2008 SRX D/C which has done 107k. However a drain on the battery has been traced back to the wiring into the ABS. (where there appears to be a shorting. The functions of the ABS have been tested and seem to be working) Anybody else had this problem and how they fixed it. I was told there wa...

I have sent them all the detail. They say they have redesigned the brackets. However they are slightly smaller but made in the same way and no additional support. This was my concern..... the guys in the Landcruiser club have had plenty of problems as well. I don't believe the problem has been addre...

We did a trip up Ruacana and back through Etosha Corrugations were bad in some patches Front Runner brackets failed Near Camp Synchro my brackets on the roof rack - 3 broke off on the bend in a straight line. (corner of the L shape). I managed to bolt Aluminuim angle iron to the bracket to ensure it...

I got front runner to put on tracks and then used their load bars to mount my Bundutec rooftop tent......so now 6 bolts to remove or reinstall...works great

Hi Jaco
Very neat
I am looking to make one but lose the pain of mistakes
Do you have advice, pictures of mount and structure etc you could pm me
thanks
John

any idea of best place to get Vigo seats from....I have a 1995 SFA D/C
thanks

I have a 2008 SRX. I did a SAC chip and intercooler which made a big difference in drive ability and was a worthwhile conversion. Have done 40k since conversion

I have a 2008 SRX. I did a SAC chip and intercooler which made a big difference in drive ability and was a worthwhile conversion. Have done 40k since conversion

Hi Marius....what progress and any more pictures?

looks good

Pierre....can you post some pictures of the tent on the Steeltop canopy
Thanks

Hi Guys
Anyone had experience fitting a Bundutec Tent to a Steeltop Canopy.
I have a 2008 Hilux SRX D/C. I am concerned with the mounting on the canopy rails as there will be an overhang onto the cab of 700 to 800mm
I think Doggone(Pierre) fitted one and can give comment
John