Search found 4860 matches
- Sun Jul 06, 2008 11:42 pm
- Forum: The Workshop
- Topic: lexus v8
- Replies: 6
- Views: 988
Re: lexus v8
Sorry Coenie, dan is jy nog getroud ook, nou kort jy nog net n Kawasaki dan gaan jy nie eers tyd he om werk toe te gaan nie.
- Thu Jul 03, 2008 11:04 pm
- Forum: The Workshop
- Topic: lexus v8
- Replies: 6
- Views: 988
Re: lexus v8
I've got one in my shop i see it more than it's owner, you are forever working and tuning the thing just for a moment's pleasure, get married or buy an old Alfa, it's less hassle.
- Thu Jul 03, 2008 10:56 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: 2.4 to 2.7 conversion
- Replies: 40
- Views: 8758
Re: 2.4 to 2.7 conversion
Ons het 4 jaar gelede op n 2.4 brospeed motor n EFI conversion gedoen met n "Go Tech", dit was van die enigste systems beskikbaar, ons het 102KW uit hom gekry, maar hy was nog altyd onder 5km/l en ons moes hom gereeld stel. Ons het ook n 2.7 ge "Go Tech", hy het ook onder 5km/l g...
- Thu Jun 26, 2008 11:50 pm
- Forum: The Workshop
- Topic: Diffirence between 3y and 4y
- Replies: 19
- Views: 30669
Re: Diffirence between 3y and 4y
Yes and just about strong enough to pull the wipers on a real HILUX
- Wed Jun 25, 2008 11:27 pm
- Forum: General Hilux Discussions
- Topic: SRX-DIFF LOCK
- Replies: 5
- Views: 1560
Re: SRX-DIFF LOCK
Jy kry n lockrite vir voor, hy kos so R4000.00, jy het n "local" diff agter die agterste lock is n gearmax vacuum lock, wat ook die sterkste lock is hy kos so R4500.00
- Thu Jun 19, 2008 10:39 pm
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: 1994 Hilux DC 4x4 SFA @ 228kw and 430nm.......
- Replies: 69
- Views: 8862
Re: 1994 Hilux DC 4x4 SFA @ 228kw and 430nm.......
Dis alles ok totdat jy op daai middelste pedaal spring en al reaksie wat jy kry is jou gesigsuitdrukking!
- Tue Jun 10, 2008 10:56 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: Fitting a new engine
- Replies: 13
- Views: 2725
Re: Fitting a new engine
It,s a good motor that loves to rev, the bell housing is std toyota and it fits with space to spare. Is it the later version with the 2 turbo's?
- Tue Jun 10, 2008 10:49 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: 2.4 to 2.7 conversion
- Replies: 40
- Views: 8758
Re: 2.4 to 2.7 conversion
The 3rz 2.7 conversion is the easiest and most reliable conversion you can do, all the parts exept the mountings are off the shelf, it can be fitted with an aftermarket EFI system or a carburettor, we have done both a few times, i prefer the carb for reliability and cost( about R7000.00 less). You c...
- Thu May 29, 2008 10:58 pm
- Forum: The Workshop
- Topic: Diffirence between 3y and 4y
- Replies: 19
- Views: 30669
Re: Diffirence between 3y and 4y
The first 2 Liter motor on this graph is not a 3Y, it's an 18R.
The 3Y had slightly less torque, but it could handle more revs than the 4Y, there isn't much difference in KW's.
The 3Y had slightly less torque, but it could handle more revs than the 4Y, there isn't much difference in KW's.
- Thu May 29, 2008 10:45 pm
- Forum: The Workshop
- Topic: Front wheels touching
- Replies: 23
- Views: 3016
Re: Front wheels touching
Even a std hilux raider with std 31" tyres rubbed at the back, the best way around it is to move the axle forward. There is an extra hole 35mm back on the left spring perch, drill another one on the right, shorten the steering and tramp rods, drill the bumpstops and you can even fit 33" ty...
- Thu May 29, 2008 10:33 pm
- Forum: General Mods
- Topic: G string bullbar [diy]
- Replies: 21
- Views: 3846
Re: G string bullbar [diy]
Los die arme ou uit! Ek het ook Datsun gery toe ek nog werk gesoek het.
- Thu May 29, 2008 10:27 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: 2.8
- Replies: 4
- Views: 1627
Re: 2.8
The 5MGE 2.8 DOHC 12 valve doesn't come with a carb, it's an older and less powerfull version of the 7MGE, it lacks torque at low rpm and it gives 30kw less than the 7MGE 3.0 L DOHC 24 valve and its the same job to fit, but the 5MGE did run cooler and gave better milage. The very first Cresida's had...
- Tue May 27, 2008 8:17 am
- Forum: The Workshop
- Topic: Dropping the Pistons on the 4y
- Replies: 22
- Views: 4153
Re: Dropping the Pistons on the 4y
No, i have'nt worked on one of those, i hope they are better quality.
- Mon May 26, 2008 11:28 pm
- Forum: General Hilux Discussions
- Topic: Cris Ingram in Oz Outback Challenge
- Replies: 2
- Views: 1205
Re: Cris Ingram in Oz Outback Challenge
HILUX RULES !!!! :D
- Thu May 22, 2008 10:04 pm
- Forum: The Workshop
- Topic: Dropping the Pistons on the 4y
- Replies: 22
- Views: 4153
Re: Dropping the Pistons on the 4y
We've fitted the first of these motors about 4 to 5 years ago when they started to import them, it seemed like a good idea at the time, the first to give problems was the carbs, the distributors went next, followed by hydraulic lifters, oil leaks, burnt valves, clutch centres breaking and high oil c...
- Tue May 20, 2008 10:48 pm
- Forum: The Workshop
- Topic: Dropping the Pistons on the 4y
- Replies: 22
- Views: 4153
Re: Dropping the Pistons on the 4y
Have the block skimmed and rebored, use good quality parts, reprofile the cam to brospeed spec and give the head a light flow job, add a branch and a freeflow to complete the package.
Please stay away from chinese import motors.
Please stay away from chinese import motors.
- Tue May 20, 2008 10:40 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: camry v6 conversion
- Replies: 5
- Views: 2045
Re: camry v6 conversion
Die grootste kopsere is die waterpype en inlet wat alles bo oor die ratkas was, die firewall is nou in die pad, maar niks is onmoontlik nie, dit hang net af hoeveel ure jy bereid is om in te sit. Die kraglewering van die 7mge en die camry is dieselfde. Die conversion is al gedoen, het nie meer die k...
- Sat May 10, 2008 10:37 am
- Forum: The Workshop
- Topic: Dropping the Pistons on the 4y
- Replies: 22
- Views: 4153
Re: Dropping the Pistons on the 4y
If you use a good quality gasket, it will have its own adhesive(it feels sticky), then you won't use anny other stuff. If it's a steel, or another "smooth" surface type, you can use copper gasket spray or silver paint.
I prefer to use OE, elring or payen gaskets.
I prefer to use OE, elring or payen gaskets.
- Sat May 10, 2008 10:25 am
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: Another Lexus conversion
- Replies: 121
- Views: 20922
Re: Another Lexus conversion
Daai is baie goed, watse managemant system het jy op? Die meeste wat ons nog kon uitkry was 190kw, 170kw is normaal. Daai V8 se klank as hy oor 7000rpm gaan is onbeskryflik, dit laat jou hare(en anne goed) regopstaan! Net daarvoor is die conversion die moeite werd! My 7mGTE Het 210kw en 400nm gegee ...
- Thu May 08, 2008 8:48 pm
- Forum: The Workshop
- Topic: Dropping the Pistons on the 4y
- Replies: 22
- Views: 4153
Re: Dropping the Pistons on the 4y
It's easy to remove the sump and pistons in place as there is no x-member in the way, give it a light hone and make sure the rings is the right size, measure the gap with a feeler guage.
- Thu May 08, 2008 8:43 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: Another Lexus conversion
- Replies: 121
- Views: 20922
Re: Another Lexus conversion
'sal pics vat as ek dit kla gemaak het.
- Wed May 07, 2008 9:28 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: Another Lexus conversion
- Replies: 121
- Views: 20922
Re: Another Lexus conversion
Yes Hennie, hoeveel ponies het die dyno daar in die dun lug gewys? Pasop n hilux raak erg unstable op 200, veral op 35''s en dan voel dit of jy op n klip trap as jy op die middelste pedaal klim, maar die die gesig van die GTI drywer as jy hom laat verbykom is soos die ad op die tv se "PRICELESS...
- Wed May 07, 2008 9:19 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: Another Lexus conversion
- Replies: 121
- Views: 20922
Re: Another Lexus conversion
Hi scopion, you should hide before the government gets you!
Ok, I have spacers machined to widen the calipers and fit the vented discs.
Ok, I have spacers machined to widen the calipers and fit the vented discs.
- Wed May 07, 2008 10:56 am
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: Another Lexus conversion
- Replies: 121
- Views: 20922
Re: Another Lexus conversion
n KZTE radiator in die een en n "custom built" 4 core cross flow in die ander. Ek gebruik 2x10'' fans voor en een 16" agter die radiator, n golf 3 pin fan switch skakel eers die voorstes en dan die agterste een deur twee relays aan. Die aircon condensor is onder die bakkie langs die r...
- Tue May 06, 2008 10:30 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: hayden adjustable thermostat
- Replies: 2
- Views: 1435
Re: hayden adjustable thermostat
Many years ago, in the age of V6 Kombi's a home brewed conversion made it to my shop, the guy used a std geizer thermostat, ran the switching wires through a 5 pin relay and bob's your aunti! He made me promise not to change his "adjustable themostat" as it worked perfect!
- Tue May 06, 2008 10:20 pm
- Forum: Electronic Gadgets and Radios
- Topic: High5 Retract A Canopy
- Replies: 4
- Views: 1779
Re: High5 Retract A Canopy
Should work well, i'll load the mother inlaw and press the remote!
- Tue May 06, 2008 10:06 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: Another Lexus conversion
- Replies: 121
- Views: 20922
Re: Another Lexus conversion
Yes you can turn the inlet manifold around, i've done it on one. I've fitted vented discs on all the sfa hiluxes i've done with more HP, i am busy with another vew kits, annyone interested? I've toyed with the idea of building a lexus with a carb and distributor, after some measurements i think 2x48...
- Sun May 04, 2008 10:36 pm
- Forum: General Hilux Discussions
- Topic: Bande vir 4x4 SRX D4D
- Replies: 9
- Views: 1853
Re: Bande vir 4x4 SRX D4D
By n vriend van my le n stel Raider 15" mags, hulle is nuut, wou hulle op my KZTE sit, maar hulle pas nie, hy soek R4500 oo vir die stel
- Thu May 01, 2008 7:06 am
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: MAZDA 2.5 TDI IN SFA HILUX
- Replies: 48
- Views: 14542
Re: MAZDA 2.5 TDI IN SFA HILUX
Yes Simon it's thats best motor ever built, i sold my 2L with 760 000km on the clock unopened, but fit a turbo and it won't see 100 000 when driven hard. I know it's not "nice" to fit other motors in a Toyota, but the first Turbo Diesel that Toyota built that's a succes is the D4D and it's...
- Sat Apr 26, 2008 11:15 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: 7M-GE engine swap for SFA Hilux
- Replies: 33
- Views: 6567
Re: 7M-GE engine swap for SFA Hilux
I've used a 3.0 skyline complete instrument cluster in a few 7m conversions, it fits perfect, the rpm, speedo(220 km/h) and fuel guage calibrations are corect, it has volt meter and oil presure guages and it looks much neater, you have to do some wiring though.
- Sat Apr 26, 2008 11:01 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: MAZDA 2.5 TDI IN SFA HILUX
- Replies: 48
- Views: 14542
Re: MAZDA 2.5 TDI IN SFA HILUX
Most of the facts are correct, you either love or hate diesels, i've never driven a succesful KZTE in an SFA Hilux. 2 problems; the gear ratio is to high, the KZTE is not a free revving motor and its not happy at high rpm, i drive one myself The mechanical diesel pump swop robs it of its power and y...
- Thu Apr 24, 2008 11:37 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: MAZDA 2.5 TDI IN SFA HILUX
- Replies: 48
- Views: 14542
Re: MAZDA 2.5 TDI IN SFA HILUX
One man's meat is another man's poison, it all depends on how it's fitted.
Do you think it cracks more heads than Toyota Turbo motors?
The power curve and higher rpm suits the hilux better than anny other diesel motor.
Do you think it cracks more heads than Toyota Turbo motors?
The power curve and higher rpm suits the hilux better than anny other diesel motor.
- Thu Apr 24, 2008 11:30 pm
- Forum: The Workshop
- Topic: 7M-GE Engin
- Replies: 15
- Views: 3140
Re: 7M-GE Engin
Ek het n "jig" gemaak waarmee ek die "line up" presies reg kry om vibrasies te voorkom en om die hoogte bo die as reg te kry, as jy hom terugskuif is die mounts ook anders.
Party keer is jy gelukkig om mounts te kry wat presies pas.
Party keer is jy gelukkig om mounts te kry wat presies pas.
- Wed Apr 23, 2008 11:14 pm
- Forum: The Workshop
- Topic: 7M-GE Engin
- Replies: 15
- Views: 3140
Re: 7M-GE Engin
Ek gebruik die std Hilux mounts, maar die brackets tussen die mounts en die enjin maak ek self.
n 2" body lift werk goed en ek skuif ook die enjin 40mm terug.
Die BMW 328 E36 radiator pas na n paar tikkies met n 4lb hammer
n 2" body lift werk goed en ek skuif ook die enjin 40mm terug.
Die BMW 328 E36 radiator pas na n paar tikkies met n 4lb hammer
- Wed Apr 23, 2008 11:02 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: MAZDA 2.5 TDI IN SFA HILUX
- Replies: 48
- Views: 14542
Re: MAZDA 2.5 TDI IN SFA HILUX
I have fitted the WL motor in 3 hilux's, I had one in my previous hilux and i am busy fitting one in my old hilux, it is one of the best coversions i have done.
- Mon Apr 21, 2008 10:25 pm
- Forum: Electronic Gadgets and Radios
- Topic: Winch Help
- Replies: 5
- Views: 1456
Re: Winch Help
I bought a winch for my KZTE, i would prefer to retain the std bumper, will start cutting this coming looong weekend, will post some pics.
- Thu Apr 17, 2008 9:40 pm
- Forum: The Workshop
- Topic: KZTE pump timing help needed
- Replies: 3
- Views: 1094
Re: KZTE pump timing help needed
The marks are very clear, it is easy to remove the cover and check, but it will have difficulty starting and it will lose half the power its out by one tooth, more likely it'l have to be adjusted on the slots at the back, using a diesel timing light or the toyota diagnostic machine. If you look clos...
- Thu Apr 17, 2008 9:28 pm
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: SFA Lift Options
- Replies: 24
- Views: 6083
Re: SFA Lift Options
When Kaspaas returns from his long trip i'll take some, or if i get another one in sooner i'll post it.
- Wed Apr 16, 2008 11:41 pm
- Forum: The Workshop
- Topic: KZTE pump timing help needed
- Replies: 3
- Views: 1094
Re: KZTE pump timing help needed
Do you have a mechanical or electronic pump?
The best way would be to take it to a diesel pump shop, they should have a timing light to set it with.
The best way would be to take it to a diesel pump shop, they should have a timing light to set it with.
- Wed Apr 16, 2008 11:32 pm
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: SFA Lift Options
- Replies: 24
- Views: 6083
Re: SFA Lift Options
The propshaft can be lengthened by 60mm, or you can make a spacer between the diff and prop flange. The bump stops needs another centre hole A hole for the centre bolt needs to be drilled on the left hand side (there is a 35 mm moved hole on the other side) The tramp rod and steering link needs to b...
- Tue Apr 15, 2008 10:41 pm
- Forum: The Workshop
- Topic: Fitting radio in SFA
- Replies: 12
- Views: 1638
Re: Fitting radio in SFA
I removed the std plastic face that holds the radio and ashtray
I used aluminium treadplate and fabricated my own faceplate(only 2 bends and a bit of jigsaw work on the plate) no cutting on the bakkie.
The fm,29 and vhf fitted on top of each other, but you have to lose the ashtray.
I used aluminium treadplate and fabricated my own faceplate(only 2 bends and a bit of jigsaw work on the plate) no cutting on the bakkie.
The fm,29 and vhf fitted on top of each other, but you have to lose the ashtray.
- Tue Apr 15, 2008 10:30 pm
- Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
- Topic: SFA Lift Options
- Replies: 24
- Views: 6083
Re: SFA Lift Options
33" tyres transforms the vehicle totally, You can fit them with your std suspension, but the front axle has to be moved forward by 35mm The gearing is ok, 5th gear is only for downhills though. You gain much more 4x4 ability with added traction than you lose in power If you choose to retain the...
- Fri Apr 11, 2008 7:45 pm
- Forum: The Workshop
- Topic: Petrol verbruik 2.4 Hi lux 22R
- Replies: 69
- Views: 7108
Re: Petrol verbruik 2.4 Hi lux 22R
Ons het al n 3.4 prado enjin gefit, hy trek soos n trein, amper beter as n lexus v8, in aus het hulle so uitgekom.
Die enjins is duur om te koop en ook baie duur om te fit, maar hy pas baie lekker.
Die enjins is duur om te koop en ook baie duur om te fit, maar hy pas baie lekker.
- Fri Apr 11, 2008 7:33 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: 7M-GE engine swap for SFA Hilux
- Replies: 33
- Views: 6567
Re: 7M-GE engine swap for SFA Hilux
Jy kan n enjin van daar af bestel, daar is n paar jap importers in die states,van hulle suply die enjins met n staal gasket en hulle waarborg hom nie as jy hom nie opsit nie.
Ons het dit al oorweeg om enjins in te bring, maar jy moet n container vol inbring om dit die moeite werd te maak.
Ons het dit al oorweeg om enjins in te bring, maar jy moet n container vol inbring om dit die moeite werd te maak.
- Thu Apr 10, 2008 9:58 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: 7M-GE engine swap for SFA Hilux
- Replies: 33
- Views: 6567
Re: 7M-GE engine swap for SFA Hilux
Die Gasket is heeltemal staal, hy het nog ringe om die silinders, maar die gedeeltes tussenin is ook staal. Jy kan hom in verskillende diktes ook kry om die kompressie te laat sak. Die blok moet nagegaan word, partykeer is dit nodig om hom ook te "skim' Dit is beter om ook ARP headboute te gebr...
- Wed Apr 09, 2008 10:01 pm
- Forum: Recovery Equipment
- Topic: Winches Hydraulic or Electric 12 or 24 volt
- Replies: 7
- Views: 5561
Re: Winches Hydraulic or Electric 12 or 24 volt
If you have friends with isuzu's, colts, fords, land rovers, jeeps and other inferior equipment, you can earn yourself a few cases of beer with a good winch on an outing!
- Wed Apr 09, 2008 9:52 pm
- Forum: General Hilux Discussions
- Topic: Fuel price INCREASE - Ou vrouenes met nat broeke fred
- Replies: 85
- Views: 10176
Re: Fuel price INCREASE
I have a 4.5 Landcruizer pick up for sale, at the current fuel price it will do a whole 35km on R100.oo, that calculates to R3.oo per km.
If you take it off road it will rize to R5.oo per km.
Anny offers?
If you take it off road it will rize to R5.oo per km.
Anny offers?
- Wed Apr 09, 2008 9:38 pm
- Forum: The Workshop
- Topic: pics on fitting extra tank
- Replies: 1
- Views: 558
Re: pics on fitting extra tank
Remove the loadbox completely(only 6 bolts and 2 plugs)
Fit the sparewheeltank and run the breatherhoses to the original filler(not to the tank)
Fit the T piece and balance pipe
Test the system before refitting loadbox
Fit the sparewheeltank and run the breatherhoses to the original filler(not to the tank)
Fit the T piece and balance pipe
Test the system before refitting loadbox
- Wed Apr 09, 2008 8:08 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: 7M-GE engine swap for SFA Hilux
- Replies: 33
- Views: 6567
Re: 7M-GE engine swap for SFA Hilux
Paar pointers; Ek skuif die enjin en ratkas 40mm terug Ek laat die "heater" pype bo oor en nie agter om loop nie Gebruik n BMW 2.8 E36 Radiator n Meganiese waaier werk beter as n elektriese een, maar as jy nie die neus wil sny nie, kan jy die BMW elektriese waaier gebruik Gebruik die stand...
- Wed Apr 09, 2008 7:31 pm
- Forum: The Workshop
- Topic: lexux ifs hilux 4x4
- Replies: 18
- Views: 3941
Re: lexux ifs hilux 4x4
So far no hasles whith line ups and vibrations We had blank flywheels casted and the machine shop does a very neat job I had the engine profile cut out of 20mm aluminium by a waterjet company, the front face gets trimmed off your existing bell housing and welded on using a special alignment tool we ...
- Mon Apr 07, 2008 12:28 am
- Forum: The Workshop
- Topic: Hilux SFA se bladvere
- Replies: 56
- Views: 7199
Re: Hilux SFA se bladvere
Ek gebruik OME vere, Gabriel Gas Safari's(extra lengte)& polyurethane buhes, R6500.00
PS: 4 vingers tussen Bumpstop en voor as is standaard (behalwe nou as jy van daai vrystaatse boer vingers het)
PS: 4 vingers tussen Bumpstop en voor as is standaard (behalwe nou as jy van daai vrystaatse boer vingers het)
- Mon Apr 07, 2008 12:06 am
- Forum: General Hilux Discussions
- Topic: Engine differences 2.7 pre-facelift & Facelift models
- Replies: 27
- Views: 33481
Re: Engine differences 2.7 pre-facelift & Facelift models
The pre facelift one uses an air mass meter(on the aircleaner), it calculates the exact amount of air that enters the intake, whereas a map censor uses preprogramed information based on throtle input that is not always ideal.
- Sun Apr 06, 2008 11:51 pm
- Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
- Topic: Condor 2.4i conversion
- Replies: 4
- Views: 2498
Re: Condor 2.4i conversion
The 1RZ 2.0L, 2RZ 2.4L, 3RZ 2.7L, all use the same block, but the bore, stroke and cylinder heads differ, they all use the same bell housing, (Not the same as anny other Toyota motors), but the bell housing is std fit on the gearbox side. For the same amount of trouble you can fit a 2.7 wich is mult...
- Sun Apr 06, 2008 10:58 pm
- Forum: Late 1998 to 2005 (Gen 5 aka IFS Hilux)
- Topic: 4x2 "raised body" na 4x4
- Replies: 20
- Views: 4146
Re: 4x2 "raised body" na 4x4
Ek is besig om my KZTE 2x4 om te bou na 4x4, het al my voorste "hubs" en aste gefit, begin die week met my diff ombouing, ek het al te veel gebreekte ratte van die standaard voorste "diff" vervang, so ek gaan die middelste gedeelte van n agteras gebruik met n locker en hom voor m...
- Sun Apr 06, 2008 10:02 pm
- Forum: The Workshop
- Topic: lexux ifs hilux 4x4
- Replies: 18
- Views: 3941
Re: lexux ifs hilux 4x4
You get 3 types of hilux gearboxes: The "W" box are std. on all local sfa hilux's also called a 21R box because it was used in the cresida range, it is the smallest and weakest of the three and it has a std or "small" bellhousing bolt patern. The "R" box is std. on our ...
- Wed Apr 02, 2008 11:48 pm
- Forum: The Workshop
- Topic: lexux ifs hilux 4x4
- Replies: 18
- Views: 3941
- Wed Apr 02, 2008 11:43 pm
- Forum: The Workshop
- Topic: lexux ifs hilux 4x4
- Replies: 18
- Views: 3941
Re: lexux ifs hilux 4x4
Scorpion, so far the 'box is holding out fine, the motor revs much smoother and higher than the 3rz, the power curve is longer and flatter than any motor i have fitted and the sound is amazing! The fuel consumption is much the same as the 2.7 driven a bit harder, around 6 km/L. i used the std 2.7 ra...
- Wed Apr 02, 2008 11:17 pm
- Forum: The Workshop
- Topic: lexux ifs hilux 4x4
- Replies: 18
- Views: 3941
Re: lexux ifs hilux 4x4
Ja Thanks, daai lyk bietjie soos Ratle & Humm, Goeie memories!
- Tue Apr 01, 2008 9:25 pm
- Forum: The Workshop
- Topic: lexux ifs hilux 4x4
- Replies: 18
- Views: 3941
Re: lexux ifs hilux 4x4
I would like to post some pics, i am busy uploading them onto photobucket, it will take some time, i will then attempt the transfer to this site, so be patient, this thing doesn't respond to mechanical inputs!
- Mon Mar 31, 2008 8:44 pm
- Forum: The Workshop
- Topic: lexux ifs hilux 4x4
- Replies: 18
- Views: 3941
Re: lexux ifs hilux 4x4
I have fitted one, but i used the manual box, the gear ratios are perfect, the auto box will need lower diff ratios and the aftermarket controllers are troublesome.