good day all.....
im in the process of getting all my ducks in a row to start this build.
I have just about all the bits and peices together. I unfortunately ran into some bad luck.I got a bell-housing from a guy,and now found it to be a bad casted/machined item.The main shaft is about 3mm off centre,and i dont like the look f it. It seem to be a poor casting as well.
where can i get a bell-housing for the 7m to the Hilux box?
Any advice would be appreciated as the R3900 at Toyota is too hectic for me?
many thx......
Boeta Mac's 7m into '96 hilux DC 4X2 Project
-
Bulletjie-3
- LR 4WD Full Lockers
- Posts: 837
- Joined: Sat Oct 16, 2010 11:00 pm
- Town: Centurion
- Vehicle: Hilux Raider SFA met 7M-GE engine
- Real Name: Everdt
Re: Boeta Mac's 7m into '96 hilux DC 4X2 Project
Welcome to the club maybe Gunta on the forum can lead you. Good luck with the conversion.
-
Mr_B
- Monster Truck
- Posts: 7249
- Joined: Fri Oct 12, 2007 2:38 pm
- Town: Cape Town
- Vehicle: Honda Jazz
- Real Name: Bretton
- Location: Brackenfell
Re: Boeta Mac's 7m into '96 hilux DC 4X2 Project
Hi Llewellyn, you can contact Fana(Conversion Man), on the forum... or try Gilo Engineering... http://www.giloeng.com/
I can't vouch for the quality of eithers products, but have heard their name mentioned on numerous conversion threads on this forum.
I can't vouch for the quality of eithers products, but have heard their name mentioned on numerous conversion threads on this forum.