Workshop Manual vir 2005 Hilux KZ-TE 3.0l 4x2

[Johann Van Der Walt]

Waar kry mens 'n "Workshop Manual" vir 'n 2005 Hilux KZ-TE 3.0 liter (diesel) 4x2?
Die voertuig het in 2002 verskyn en produksie is beïndig in 2005, so een boek behoort die reeks te dek.
Wil ook weet of onderdele (filters, "driving belts" packings, gaskets, ens., ens.) vir dienste by die Toyota handelaar of generiese handelaars gekoop moet word, maw. Toyota is sekerlik duurder of hoe?
As daar iemand is wat al hierdie inligting op papier het (aanbevole olies ens.) sal ek dit waardeer as ek in die hande kan kry!
, :D

[Rooikappie]

Hierdie inligting is blykbaar baie skaars.
Ek is ook opsoek na hierdie inligting vir my 2002 4x4 KZTE.

Sal BAIE wardeer word.
Lourens

^

[Family_Dog]

Wil ook weet of onderdele (filters, "driving belts" packings, gaskets, ens., ens.) vir dienste by die Toyota handelaar of generiese handelaars gekoop moet word, maw. Toyota is sekerlik duurder of hoe?

Johan, Hoppy recently posted that he will only use the genuine belts from TSA for his KZTE, nothing else lasts. I would go by what he says. The set of belts came to about R700 if I remember correctly while the generic ones he previously used had to be changed up to three times in one year.


-F_D

[Bfreesani]

I have a PDF scanned copy of a KZTE30 Engine repair manual published August 1999, not sure if this would help anyone. It is 10Mb. Not sure where I can post it or send it too

[Mud Dog]

Wil ook weet of onderdele (filters, "driving belts" packings, gaskets, ens., ens.) vir dienste by die Toyota handelaar of generiese handelaars gekoop moet word, maw. Toyota is sekerlik duurder of hoe?

Johan, Hoppy recently posted that he will only use the genuine belts from TSA for his KZTE, nothing else lasts. I would go by what he says. The set of belts came to about R700 if I remember correctly while the generic ones he previously used had to be changed up to three times in one year.


-F_D

A small point of correction Eric, it was'nt Hoppy that had to change 3 x in one year and the underlying reason for it was that the incorrect belts had been supplied on each occasion. I respect Allan's experience and so accept what he says about the OEM belts lasting longer, but the RAM belts are more than fair quality.

[chopper]

David,
Would you be kind enough to mail me the pdf file containing the KZ-TE 3,0l manual to "tinusjvrensburg@yahoo.com"
Many thanks

[DOELLOOS]

I have a manual for a Ford 302 V8 engine...

I can mail it to you as well...

:wth:

[chopper]

Would it be a match for the KZ-TE?

[DOELLOOS]

No, unfortunately not...

For that I'll mail you my Rolux Magnum lawnmower users manual...

[chopper]

Dit gebeur nou wanneer jy kinders oorlog toe stuur ne!

[Mud Dog]

Eish!! (Looking for a smiley that shakes it's head) .....

[chopper]

Andy,
I think we need to get Ewald to spend more time on the Interceptor than on the Forum?!

[Mud Dog]

I agree, but it's not a Landie and there's not enough maintenance to keep him busy ..... he's already bored with the interior make-over ...

[DOELLOOS]

My pc interface is IN the Interceptor...

[Mud Dog]

That would explain a lot!!!

[chopper]

OK, I give up!

[Family_Dog]

Eish!! (Looking for a smiley that shakes it's head) .....

How many do you need, Andy?








-F_D

[Johann Van Der Walt]

Kyk by Autobooks.co.za vir die 4x2 en 4x4!!!!!! R395.00 :D :D :D

[legend35]

Johann,jy kan die Haynes manual koop by Autozone.As hy nie op die rak is nie dan kry hulle hom vir jou.

[chopper]

Johan,
Baie dankie vir die stukkie inligting!

[chopper]

Was vanoggend by (my naaste) Autozone en alhoewel hulle my nie kon help nie, het hulle SEVEN SEA TRADERS CC in Centurion geskakel en hulle het 1 kopie gehad - hulle is ook die Autobooks mense. Die personeel was baie behulpsaam en vriendelik en bereid om enige navraag te bevredig (rakende handleidings!). Hulle is neffens die ou Jhb/Pta pad waar Builders Warehouse eens was - die Gateway sentrum, die prys was R395 inkl. Tel no 012 6616063

[legend35]

Ek is bly jy het regekom.Die manuals is maar n bietjie skaars.