I have been battling with some strange noises while driving and I thought perhaps the wheel bearings but I did the usual wheel tug and there is no movement there.
Having lifted the vehicle to check that I then noticed the shocks are leaking which of course would create handling issues as well as some vibration and noises whilst driving.
So it seems I will start with replacing the shocks.
Any take on what's available and decent that won't break the bank since my stash under the bed is low.
Suggestions appreciated.
Scott
Sent from my SM-G955F using Tapatalk
'05 Vigo Shocks
- Scooter
- LR4WD, Lockers, Crawler Gears
- Posts: 1283
- Joined: Fri Jul 20, 2007 9:42 am
- Town: JHB
- Vehicle: '94 Raider, '05 Vigo 4.0 v6
- Real Name: Scott
- Location: Strubens Valley
'05 Vigo Shocks
"I know that you believe you understand what you think I said, but I'm not sure you realise that what you heard is not what I meant."
-
- LR4WD, Lockers, Crawler Gears
- Posts: 1484
- Joined: Mon May 07, 2012 12:33 pm
- Town: Pretoria
- Vehicle: Toyota Hilux Dakar 2.8 GD-6 DC 4X4
- Real Name: Marnus
- Location: Pretoria Oos
- Contact:
Re: '05 Vigo Shocks
I have had good service from Monroe shocks. I am on my second set since the originals and they won't break the bank.
- Mud Dog
- Moderator
- Posts: 29856
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: '05 Vigo Shocks
Also like the Monroe option.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- Scooter
- LR4WD, Lockers, Crawler Gears
- Posts: 1283
- Joined: Fri Jul 20, 2007 9:42 am
- Town: JHB
- Vehicle: '94 Raider, '05 Vigo 4.0 v6
- Real Name: Scott
- Location: Strubens Valley
Re: '05 Vigo Shocks
Thanks I'll take a look.
Any specific models?
Sent from my SM-G955F using Tapatalk
Any specific models?
Sent from my SM-G955F using Tapatalk
"I know that you believe you understand what you think I said, but I'm not sure you realise that what you heard is not what I meant."
-
- LR4WD, Lockers, Crawler Gears
- Posts: 1484
- Joined: Mon May 07, 2012 12:33 pm
- Town: Pretoria
- Vehicle: Toyota Hilux Dakar 2.8 GD-6 DC 4X4
- Real Name: Marnus
- Location: Pretoria Oos
- Contact:
Re: '05 Vigo Shocks
The standard gas filled shock for your bakkie.
- Scooter
- LR4WD, Lockers, Crawler Gears
- Posts: 1283
- Joined: Fri Jul 20, 2007 9:42 am
- Town: JHB
- Vehicle: '94 Raider, '05 Vigo 4.0 v6
- Real Name: Scott
- Location: Strubens Valley
Re: '05 Vigo Shocks
So after driving around with the noise and constantly checking things, I put the vehicle up on all fours and ran it.
Found the right rear wheel bearing was shot and making a hell of a noise. Since they are press fit bearings it makes the standard tug test useless and only a stethoscope worked.
Pulled the hubs apart, and pulled the shafts out. While I was there I had the drums skimmed and shoes relined, R480
Toyota wanted R800 odd for just the bearing.
Bearing man charged R650 for a Timken kit that had the bearing and seals needed.
Took the shafts to a propshaft place and had them press out the old and press in the new for R520.
All back together with new diff oil and the it's back to quiet again.
Still need to do the shocks though as they are leaking.
Sent from my SM-G955F using Tapatalk
Found the right rear wheel bearing was shot and making a hell of a noise. Since they are press fit bearings it makes the standard tug test useless and only a stethoscope worked.
Pulled the hubs apart, and pulled the shafts out. While I was there I had the drums skimmed and shoes relined, R480
Toyota wanted R800 odd for just the bearing.
Bearing man charged R650 for a Timken kit that had the bearing and seals needed.
Took the shafts to a propshaft place and had them press out the old and press in the new for R520.
All back together with new diff oil and the it's back to quiet again.
Still need to do the shocks though as they are leaking.
Sent from my SM-G955F using Tapatalk
"I know that you believe you understand what you think I said, but I'm not sure you realise that what you heard is not what I meant."
- Mud Dog
- Moderator
- Posts: 29856
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: '05 Vigo Shocks
Yup, DIY can save you a sizeable packet over time. Glad to hear that you found the noisy bearing.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!