Hello All
I need a Injector Pump pulley for a imported Toyota 2C non turbo engine. Bussy with restoration and replaced the waterpump. When i fitted the IP pulley i noticed a crack from the key-way all the way up to the tooth`s
It is a metal pulley, I am not sure if it can be repaired with welding?
Regards
Toyota 2C Import - IP Pulley
- Mud Dog
- Moderator
- Posts: 29857
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: Toyota 2C Import - IP Pulley
Looks like it's forged. Welding could distort it. I would take it to a reputable engineering works and ask their advice.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
-
- High Range 2WD
- Posts: 16
- Joined: Tue Apr 03, 2018 3:45 pm
- Town: Strand
- Vehicle: 82 Hilux 4x4 S/C
- Real Name: Rodney
Re: Toyota 2C Import - IP Pulley
Good idea Andy
I will swing by the engineers and ask them.
I can get a OEM one on E Bay for R800 but is not sure if i have the correct part number - 1361364011
I will swing by the engineers and ask them.
I can get a OEM one on E Bay for R800 but is not sure if i have the correct part number - 1361364011