Toyota 2C Import - IP Pulley

Having problems with your vehicle? Or need advice on repairing or servicing your Hilux? This is the place to ask for help
Post Reply
Zatopec
High Range 2WD
High Range 2WD
Posts: 16
Joined: Tue Apr 03, 2018 3:45 pm
Town: Strand
Vehicle: 82 Hilux 4x4 S/C
Real Name: Rodney

Toyota 2C Import - IP Pulley

Post by Zatopec »

Hello All

I need a Injector Pump pulley for a imported Toyota 2C non turbo engine. Bussy with restoration and replaced the waterpump. When i fitted the IP pulley i noticed a crack from the key-way all the way up to the tooth`s

It is a metal pulley, I am not sure if it can be repaired with welding?

Regards
Attachments
Gertjie 002.JPG
User avatar
Mud Dog
Moderator
Moderator
Posts: 29852
Joined: Tue Apr 29, 2008 2:18 am
Town: East London
Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
Real Name: Andy
Club VHF Licence: HC103

Re: Toyota 2C Import - IP Pulley

Post by Mud Dog »

Looks like it's forged. Welding could distort it. I would take it to a reputable engineering works and ask their advice.
When your road comes to an end ...... you need a HILUX!.

Image
Image

Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Zatopec
High Range 2WD
High Range 2WD
Posts: 16
Joined: Tue Apr 03, 2018 3:45 pm
Town: Strand
Vehicle: 82 Hilux 4x4 S/C
Real Name: Rodney

Re: Toyota 2C Import - IP Pulley

Post by Zatopec »

Good idea Andy

I will swing by the engineers and ask them.

I can get a OEM one on E Bay for R800 but is not sure if i have the correct part number - 1361364011
Post Reply

Return to “The Workshop”