Heavy duty load bin slide.
- WESKUSKLONG
- LR 4WD Rear Locker
- Posts: 364
- Joined: Sun May 27, 2012 9:03 pm
- Town: St Helena bay
- Vehicle: Hilux KZTE with ARB front locker/Safari Snorkel / 33x12.5x15 tyres / Long range tank / Battery system / Thomas compressor/ 2Engel fridge freezers/Cruise Control.
- Real Name: Rudi
Heavy duty load bin slide.
I had some spare time and decide it time to built the long awaiting slide.
- Jaans
- LR 4WD Full Lockers
- Posts: 504
- Joined: Sun Nov 21, 2010 4:39 pm
- Town: Benoni
- Vehicle: 2005 4L V6 DC Hilux; Pajero Sport 2.5 4x4 M/T
- Real Name: Johannes
Re: Heavy duty load bin slide.
Looks good.
1 Kor 1:18 " Die boodskap van die kruis van Christus is wel onsin vir die wat verlore gaan, maar vir ons wat gered word, is dit die krag van God."
- MOFASA
- Monster Truck
- Posts: 3095
- Joined: Sun Mar 04, 2012 7:27 pm
- Town: Kempton Park
- Vehicle: 1998 JEEP XJ 4.0............ 4 inch lift.... more mods to follow............ Old vehicle was MOFASA
- Real Name: Johno
- Club VHF Licence: X119
- Location: Kempton Park
Re: Heavy duty load bin slide.
Look good so far.....
What bearings are you using.....
ID, OD and thickness please
What bearings are you using.....
ID, OD and thickness please
Live Life in the FAST lane....
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP ..... You wouldn't understand....
[rimg=206x128]
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP ..... You wouldn't understand....
[rimg=206x128]
- Masekind
- LR4WD, Lockers, Crawler Gears
- Posts: 1235
- Joined: Mon Feb 18, 2013 11:41 am
- Town: Lichtenburg
- Vehicle: 2005 Hilux 4x4 v6, LR tank, ARB Bumper. (iJzer)
- Real Name: Drikus
- Location: Lichtenburg
Re: Heavy duty load bin slide.
Baie mooi
If you don’t build your dreams someone else will hire you to build there’s
- Thunder02
- Moderator
- Posts: 8033
- Joined: Fri Nov 26, 2010 7:53 pm
- Town: East Rand
- Vehicle: IFS Hilux
- Real Name: Neil
- Club VHF Licence: HC105
- Location: 4x4 Direct Boksburg
- Contact:
Re: Heavy duty load bin slide.
Looks great
Not all those who wander are lost!
Scout motto:be prepared....
www.4x4direct.co.za
Email: boksburg@4x4direct.co.za
IFS is like a swambo, soft, sexy and expensive!
Scout motto:be prepared....
www.4x4direct.co.za
Email: boksburg@4x4direct.co.za
IFS is like a swambo, soft, sexy and expensive!
- WESKUSKLONG
- LR 4WD Rear Locker
- Posts: 364
- Joined: Sun May 27, 2012 9:03 pm
- Town: St Helena bay
- Vehicle: Hilux KZTE with ARB front locker/Safari Snorkel / 33x12.5x15 tyres / Long range tank / Battery system / Thomas compressor/ 2Engel fridge freezers/Cruise Control.
- Real Name: Rudi
Re: Heavy duty load bin slide.
ThanksMOFASA wrote:Look good so far.....
What bearings are you using.....
ID, OD and thickness please
ID=8mm
OD=22mm
Thickness 7mm
- MOFASA
- Monster Truck
- Posts: 3095
- Joined: Sun Mar 04, 2012 7:27 pm
- Town: Kempton Park
- Vehicle: 1998 JEEP XJ 4.0............ 4 inch lift.... more mods to follow............ Old vehicle was MOFASA
- Real Name: Johno
- Club VHF Licence: X119
- Location: Kempton Park
Re: Heavy duty load bin slide.
I hope you used sealed bearings....WESKUSKLONG wrote:ThanksMOFASA wrote:Look good so far.....
What bearings are you using.....
ID, OD and thickness please
ID=8mm
OD=22mm
Thickness 7mm
Live Life in the FAST lane....
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP ..... You wouldn't understand....
[rimg=206x128]
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP ..... You wouldn't understand....
[rimg=206x128]
- WESKUSKLONG
- LR 4WD Rear Locker
- Posts: 364
- Joined: Sun May 27, 2012 9:03 pm
- Town: St Helena bay
- Vehicle: Hilux KZTE with ARB front locker/Safari Snorkel / 33x12.5x15 tyres / Long range tank / Battery system / Thomas compressor/ 2Engel fridge freezers/Cruise Control.
- Real Name: Rudi
Re: Heavy duty load bin slide.
YesMOFASA wrote:I hope you used sealed bearings....WESKUSKLONG wrote:ThanksMOFASA wrote:Look good so far.....
What bearings are you using.....
ID, OD and thickness please
ID=8mm
OD=22mm
Thickness 7mm
-
- High Range 2WD
- Posts: 15
- Joined: Tue Sep 24, 2013 9:19 pm
- Town: Port Elizabeth
- Vehicle: 2013 Hilux 4x4 D4D
- Real Name: Johan
Re: Heavy duty load bin slide.
Rudi, very nicely done. What size angle iron did you use?
- WESKUSKLONG
- LR 4WD Rear Locker
- Posts: 364
- Joined: Sun May 27, 2012 9:03 pm
- Town: St Helena bay
- Vehicle: Hilux KZTE with ARB front locker/Safari Snorkel / 33x12.5x15 tyres / Long range tank / Battery system / Thomas compressor/ 2Engel fridge freezers/Cruise Control.
- Real Name: Rudi
Re: Heavy duty load bin slide.
I had some plates bend instead of angle iron. 70mm x 3mm.Pjjvdm wrote:Rudi, very nicely done. What size angle iron did you use?
-
- High Range 2WD
- Posts: 15
- Joined: Tue Sep 24, 2013 9:19 pm
- Town: Port Elizabeth
- Vehicle: 2013 Hilux 4x4 D4D
- Real Name: Johan
Re: Heavy duty load bin slide.
Rudi
Some more questions :
1 Is this the full width of the loadbin?
2 What is the thickness of the flatbar lip that is running between the bearings?
3 Assuming you used something like plywood inside the drawer?
4 Any idea of how much weight you can have on the end when extended, like a fridge?
Some more questions :
1 Is this the full width of the loadbin?
2 What is the thickness of the flatbar lip that is running between the bearings?
3 Assuming you used something like plywood inside the drawer?
4 Any idea of how much weight you can have on the end when extended, like a fridge?
- WESKUSKLONG
- LR 4WD Rear Locker
- Posts: 364
- Joined: Sun May 27, 2012 9:03 pm
- Town: St Helena bay
- Vehicle: Hilux KZTE with ARB front locker/Safari Snorkel / 33x12.5x15 tyres / Long range tank / Battery system / Thomas compressor/ 2Engel fridge freezers/Cruise Control.
- Real Name: Rudi
Re: Heavy duty load bin slide.
I pack on there 2x 40L engels, gazebo ,gas cylinder and 4 x ammo boxes with no problems.Pjjvdm wrote:Rudi
Some more questions :
1 Is this the full width of the loadbin? Yes between the wheel arches.
2 What is the thickness of the flatbar lip that is running between the bearings? I used a 19 mm x 19 mm tubing.
3 Assuming you used something like plywood inside the drawer? Yes I used 12mm ply wood.
4 Any idea of how much weight you can have on the end when extended, like a fridge?
-
- High Range 2WD
- Posts: 15
- Joined: Tue Sep 24, 2013 9:19 pm
- Town: Port Elizabeth
- Vehicle: 2013 Hilux 4x4 D4D
- Real Name: Johan
Re: Heavy duty load bin slide.
Baie dankie!