Ek het onlangs vir my 'n canopy van aluminium laat bou, +/- 2mm dik threadplate. My spesifikasies was dowwe aluminium, maar toe ek gister die canopy gaan haal moes ek my sonbril en suntan loation aansit - hulle het blink aluminium gebruik
Enige raad oor hoe om die blink uit te haal? kan mens dit verf? (seker nie baie prakties nie a.g.v. krapmerke, colour matching ens - my bakkie is rooi)
Aluminium canopy
-
- High Range 2WD
- Posts: 24
- Joined: Wed Oct 03, 2007 12:01 pm
- Town: Cape Town
- Vehicle: Toyota 4x4 KZTE
- Real Name: Steve
- Location: Cape Town
Re: Aluminium canopy
If it is mill finish aluminium leave it as it is. It will oxidize with in a couple of months and then you will have the correct dull finish.
Steve
Steve
- Niel
- Moderator
- Posts: 7372
- Joined: Sun Jul 15, 2007 10:07 pm
- Town: Cape Town
- Vehicle: 2014, DC, D4D 3.0, 4x4
- Real Name: Niel
- Location: Bellville
- Contact:
Re: Aluminium canopy
Riaan, nothing you can add to dull it a bit. I agree with Steve or take it back and tell them to change it - you did pay for it afterall