Page 1 of 1

2006 Fortuner body lift kit

Posted: Mon Aug 15, 2016 4:10 pm
by Optimus Prime
Need some info please .
Can i do a body lift on a 2006 tuna ,i did do a iron man suspension sometime ago .
if there wont be a problem where can i buy the spacers ,how many would i need maybe just looking for 40mm lift .
and can i do it myself
thanks

Re: 2006 Fortuner body lift kit

Posted: Mon Aug 15, 2016 4:43 pm
by TertiusK
Hi Robert!!

I just replaced my whole suspension (front and back) with MIKEM Suspension. raised my old SFA with 45mm. Call Darrell at MIKEM suspensions. He is also a member on this forum (MIKEM1)

Best service and prises ever!! You will not regret it.

Cheers

Re: 2006 Fortuner body lift kit

Posted: Tue Aug 16, 2016 8:32 am
by ChrisF
Robert what do you want to do :
- raise the suspension, OR
- raise the body above the chassis ?

For a quick suspension lift - you can buy spacers from 4x4Direct. Or replace the Ironman Suspension ...

Body lift is only done to fit much larger tires, doubt this is what you want to do.

Re: 2006 Fortuner body lift kit

Posted: Tue Aug 16, 2016 9:34 am
by Optimus Prime
Already have the iron man in ,just looking for body lift ,to have the van a bit higher .
had a fried who helped with these things but now moved to another plannet.
dont know if i put the spacers in will there be issues with gear levers ,etc
main reason is to make it look better for me.bit higher

Re: 2006 Fortuner body lift kit

Posted: Tue Aug 16, 2016 11:08 am
by lukestoyzx
There is a mob called lux lifts in new Zealand. They may do a kit, if not id say a lux one wouldn't be that hard to make work. I've body lifted my lux with a kit from VMN, awesome kit as it has everything! If the tuna is anything like the lux you'll need to drop the radiator, extend the steering shaft and the airbox to turbo pipe as well as other things!

Sent from my SM-N920I using Tapatalk

Re: 2006 Fortuner body lift kit

Posted: Tue Aug 16, 2016 12:57 pm
by Thunder02
Optimus Prime wrote:Need some info please .
Can i do a body lift on a 2006 tuna ,i did do a iron man suspension sometime ago .
if there wont be a problem where can i buy the spacers ,how many would i need maybe just looking for 40mm lift .
and can i do it myself
thanks
Hi Robert, 4x4 Direct stocks the spacers:
http://www.4x4direct.co.za/body-lift-sp ... -40mm.html" onclick="window.open(this.href);return false;
If you stick below 50mm, then you will not have to do major mods, the critical things are the break lines, steering rack and radiator.
Your front and rear bumpers will also have to be lifted as they are attached to the chassis and not the body.
Give Darrel a shout, he did my body lift.
011 493 5181

Re: 2006 Fortuner body lift kit

Posted: Tue Aug 16, 2016 8:17 pm
by ahmedoo
I did the amada extreme full lift on mine it's so good zero body roll

Sent from my SM-N910F using Tapatalk