Hilux 4x4 Forum

Hi there

Can someone please scan (at nice hi-res) the little panel that sits behind the ventilation controls? I want to fix mine (it has holes in) but they are like hens teeth. So I'm going to get a sticker printed and stick it over the front.

Thanks in advance

Is that now the climate control faceplate. Hot cold ect.?

niclemaitre wrote:Hi there

Can someone please scan (at nice hi-res) the little panel that sits behind the ventilation controls? I want to fix mine (it has holes in) but they are like hens teeth. So I'm going to get a sticker printed and stick it over the front.

Thanks in advance

Het jy die handelaar probeer ?

is this the foto you need

KOBUSL wrote:Het jy die handelaar probeer ?

They don't do them any more, I've tried scrapyards too.

mcw wrote:is this the foto you need

I can work with that if I have to, but what I'm hoping someone would do is remove the panel, scan it and email me the image, that way the dimensions etc will be spot on

Hi Nic, try Barry at Ultimate 4X4 - I got one from him.

MonsterLux wrote:Is that now the climate control faceplate. Hot cold ect.?

Yes, exactly that.

My dashboard is currently in spares so wil scan it for you. Must tell you it is a bit yellowish due to age. But I wil also try and trace it in Autocad and make a pdf drawing of it.

MonsterLux wrote:My dashboard is currently in spares so wil scan it for you. Must tell you it is a bit yellowish due to age. But I wil also try and trace it in Autocad and make a pdf drawing of it.

Thanks so much! My email is nicholaslemaitre (at) gmail (dot) com

I also need one.........if you could e-mail it to me toooo please?

tiaan@philwest.co.za

I would really appreciate one of these as well. Willing pay, courier, printing whatever

Okey I will make a nice 1:1 colour drawing of this and hopefully have a proposal to give by tomorrow morning. If it comes out nice I will make the pdf and sent to everyone that wants one

Thanks Johan, gaaf van jou
pclouwrens@gmail.com

Guys, be very careful of this panel, it is extremely brittle. When we did Bulldog's EFI conversion it somehow got broken. Much to my joy, I was able to order a new one from Toyota, can't remember the price though.

But it would indeed be great to have one that a person can print on black vinyl or something, so please load it on the forum.


-F_D

Sneek peak. Just to show I did not forget

Okey gents we need to brainstorm. Wil there be a way to double layer this sticker. So that we can have the white, blue and red on some sort of transparent colour plastic with a black vinyl around that. Reson being so that one can stil benifit from the back light. Something like that old treprojectors prints with the black vinyl over it.

While we are resolving the matter we might aswell do it properly and have a few spare ones made up.

Picture taken from computer screen. Just need to sort out some lines that is to thin to print. But gives you an ideea what it would look like.

Layering is really simple with vinyl. You will have a white back sticker and a black one placed on top of it. The back light will shine through the white. I would however suggest that a 2mm clear piece of perspex cut to the correct size form the backing. then you just stick the sticker on top.

I recently redid the 3.0 kzte sticker on the back of my bakkie. I don’t have a tailgate any more but rather a full door. The lettering has a black edge round the red. That edge is nothing more than a full black sticker underneath the red.

Johan, that looks brilliant! Probably end up stronger than the original as well, which was very brittle.


-F_D

Family_Dog wrote:Johan, that looks brilliant! Probably end up stronger than the original as well, which was very brittle.


-F_D

+100

MonsterLux wrote:Picture taken from computer screen. Just need to sort out some lines that is to thin to print. But gives you an ideea what it would look like.

Sterling job Johan,

I am looking forward to this!!

This looks awesome! Thank you very much

Thys does stickers... Maybe he has some advice?

Try Hilux Bakkie Spares in PTA.
The guy has them made up and sells them. I bought one from him 3 years back. (R100 if I remember correctly)

Pote wrote:Try Hilux Bakkie Spares in PTA.
The guy has them made up and sells them. I bought one from him 3 years back. (R100 if I remember correctly)

Contact details for them?

niclemaitre wrote:

Pote wrote:Try Hilux Bakkie Spares in PTA.
The guy has them made up and sells them. I bought one from him 3 years back. (R100 if I remember correctly)

Contact details for them?

Andrew (Toyota Bakkie Spares)
012 379 8790
083 949 5014

He posts and courier stuff all over the show...

I want one too please. Mine has a few holes in it.... been lookinf for one for a while....

Ok, i had the plastic made, without the sticker, we should bring the two together

Hoppy wrote:Ok, i had the plastic made, without the sticker, we should bring the two together

What type of plastic did you use Allan?
I am done with the redraw, will make a 1:1 print tomorrow as final check. Then we can make some plans to make a part.

Ek stel ook defenitief belang in een.

Hoppy wrote:Ok, i had the plastic made, without the sticker, we should bring the two together

That sounds like a good idea, can I get one too please Allan?

niclemaitre wrote:

Hoppy wrote:Ok, i had the plastic made, without the sticker, we should bring the two together

That sounds like a good idea, can I get one too please Allan?

Could the guy at toyota bakie spares help you?

Not yet, will call them today

Hulle het in vooraad. R100 elk

MonsterLux wrote:

Hoppy wrote:Ok, i had the plastic made, without the sticker, we should bring the two together

What type of plastic did you use Allan?
I am done with the redraw, will make a 1:1 print tomorrow as final check. Then we can make some plans to make a part.

Have you got a finished product yet..... really want to replace mine....

http://www.partsolution.co.za/auto/list ... referer/9/" onclick="window.open(this.href);return false;

I have to get one as well.

Nope, nothing happened, Toyota Bakkie Spares were pretty useless at getting back to me so I gave up, however if that redrawn diagram is around I'll happily get it made into a sticker

Hi daar.

Ek soek al lank na so 'n cover. Het al 3 gekry maar hulle is almal op dieselfde plek stukkend.

Kan julle my dalk help asb?

Tertius, the contact details are in the post.

Pote wrote: ↑Mon Sep 01, 2014 3:19 pm

niclemaitre wrote:

Pote wrote:Try Hilux Bakkie Spares in PTA.
The guy has them made up and sells them. I bought one from him 3 years back. (R100 if I remember correctly)

Contact details for them?

Andrew (Toyota Bakkie Spares)
012 379 8790
083 949 5014

He posts and courier stuff all over the show...