I installed a set of 33" Hankook Muds on my Hilux. On most tarrains its better than ever but it jumps around a lot on climbing hills where my previous 31's was better. Any ideas?
Can anyone tell me where I can find the following:
2" Body lift
BallJoint Lift (My suspension is maxed out meaning that there is little to none downward travel in front)
And another option other than ARB for a front locker, not a permanent locker though.
Modifying my 2002 Double Cab 3KZTE
- peetvdw
- Low Range 4WD
- Posts: 160
- Joined: Fri May 14, 2010 9:09 am
- Town: Centurion
- Vehicle: Jeep
- Real Name: Peet
Modifying my 2002 Double Cab 3KZTE
Peet van der Walt
http://www.youtube.com/user/MonsterHilux" onclick="window.open(this.href);return false;
http://www.youtube.com/user/MonsterHilux" onclick="window.open(this.href);return false;
- pietpetoors
- Moderator
- Posts: 10650
- Joined: Thu May 17, 2007 9:12 pm
- Town: Langebaan
- Vehicle: 2.7 Hilux 4x4 DC
- Real Name: Pieter
- Club VHF Licence: X27
- Contact:
Re: Modifying my 2002 Double Cab 3KZTE
Ask Hoppy about the lift kit, looooong ago he told me he have one.
Only Dead Fish Go With The Flow!
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
- peetvdw
- Low Range 4WD
- Posts: 160
- Joined: Fri May 14, 2010 9:09 am
- Town: Centurion
- Vehicle: Jeep
- Real Name: Peet
Re: Modifying my 2002 Double Cab 3KZTE
Thanks
Peet van der Walt
http://www.youtube.com/user/MonsterHilux" onclick="window.open(this.href);return false;
http://www.youtube.com/user/MonsterHilux" onclick="window.open(this.href);return false;