Help needed with Tonneau cover and rollbar

Discuss modifications on your new shape Hilux here. 2005 till current. Also called the Vigo in other countries.
Post Reply
CarelZA
Newbie
Posts: 4
Joined: Wed Jan 08, 2014 8:53 am
Town: Stellenbosch
Vehicle: 2008 Hilux D4D
Real Name: Carel

Help needed with Tonneau cover and rollbar

Post by CarelZA »

This may look like a stupid question to some of you but I just can't figure out an easy way to remove and attach my tonneau cover. The cover attaches to the back and sides of the load bin with an elastic thread, but it seems that behind the cab it needs to slide in from the side. The rollbar makes sliding it in pretty tricky. Is there an easy way to do this?

Image
User avatar
dantjie
Low Range 4WD
Low Range 4WD
Posts: 144
Joined: Sat Aug 20, 2011 6:40 pm
Town: kuilrivier
Vehicle: HILUX SFA LTD 2.4 EFI
Real Name: Danie

Re: Help needed with Tonneau cover and rollbar

Post by dantjie »

Hi carel
Nope sorry no bypasses on this one u must make sure that the rope inside the tonneau cover fits snuggle into the rail if it came out, u must loosen the elastic thread at both sides till by the roll bar and almost remove the cover and the slide it into the rail from one side to the other and then retighten the rope again.
CarelZA
Newbie
Posts: 4
Joined: Wed Jan 08, 2014 8:53 am
Town: Stellenbosch
Vehicle: 2008 Hilux D4D
Real Name: Carel

Re: Help needed with Tonneau cover and rollbar

Post by CarelZA »

Dankie Dantjie!
Post Reply

Return to “Late 2005 - 2016 Hilux (Gen 6 aka Vigo-shape)”