Hilux 4x4 Forum

Motor is in but not sitting happy on the engine mountings has anybody got any advice as to which mountings to use.

'Fondle' them with a grinder until they are happy!

You have to cut the brackets on the chassis and re-angle them

Zepplin the angle grinder is scared of the 4 pound hammer at the moment.

Thanks for the advice Hoppy.Will look at that angle.

Scott wrote:Thanks for the advice Hoppy.Will look at that angle.

Hey Scott did you ever sort this problem?

I agree that you should get them off the chassis.allign the motor and fit the mountings

I did it on my SFA. You have to move the mountings and best use Hilux mountings. I tried ford but broke on the first 4x4 trip.

I have done quite a few conversions in my lifetime.

Going semi solid mounts on all my conversions of late. They are indestructible an easy to make fit all type of engines and conversions

Those look very interesting, where does one get them. What type of bush is inside the mounting.

I build my own using the yellow suspension bushes.