Naan manne
Ek gaan my toyota 5l diesel engine uithaal verkoop en kyk om V6 ford intebou, ek benodig n engin , bellhousing , cluch, en belangrikste ford V6 engin, Indien iemand kan help , laat weet my by crrobinson.308@gmail.com.
Dankie
Charles
toyota to ford v6 bellhousing
- grips
- High Range 4WD
- Posts: 86
- Joined: Thu Nov 15, 2007 5:37 pm
- Town: kathu
- Vehicle: 347 Ranger v8 Ranger 302 v8 Nissan Patrol 302 v8
- Real Name: christo
Re: toyota to ford v6 bellhousing
The bell housing you can get from Gilo Engineering
http://www.giloeng.com/" onclick="window.open(this.href);return false;
They make good quality bell housings.
On the Hilux v6 conversions I did I used the standard v6 fly-wheel and pressure plate
with a 4x4 Hilux clutch plate.
Good v6 engines are getting sarce. See if you can find a black engine, the ones with
the black aluminium tappet covers. The have hardened valve inserts and can run on
unleaded fuel.
In the 80`s - 90`s I build a few ass kicking Essex v6 engines.
Had all the spares ready to stroke and bore a v6 3.0l to 4.0l.
Their head design robs them from power.
You still get nice aftermarket heads and stuff.
Burtonpower manufacture CNC heads for the Essex v6.
http://www.burtonpower.com/burton-cylin ... ch082.html" onclick="window.open(this.href);return false;
With the right parts and stroked out engine you can build a 250kw + engine.
The current Rand / British Pound can make this an expensive exercise.
http://www.giloeng.com/" onclick="window.open(this.href);return false;
They make good quality bell housings.
On the Hilux v6 conversions I did I used the standard v6 fly-wheel and pressure plate
with a 4x4 Hilux clutch plate.
Good v6 engines are getting sarce. See if you can find a black engine, the ones with
the black aluminium tappet covers. The have hardened valve inserts and can run on
unleaded fuel.
In the 80`s - 90`s I build a few ass kicking Essex v6 engines.
Had all the spares ready to stroke and bore a v6 3.0l to 4.0l.
Their head design robs them from power.
You still get nice aftermarket heads and stuff.
Burtonpower manufacture CNC heads for the Essex v6.
http://www.burtonpower.com/burton-cylin ... ch082.html" onclick="window.open(this.href);return false;
With the right parts and stroked out engine you can build a 250kw + engine.
The current Rand / British Pound can make this an expensive exercise.
-
- LR 4WD Rear Locker
- Posts: 414
- Joined: Wed Oct 19, 2011 8:00 am
- Town: Benoni
- Vehicle: Hilux SFA
- Real Name: Rodney
Re: toyota to ford v6 bellhousing
Had the lot spare and sold it for R2500 but the person took my extra bell housing will see if I can get it back.
-
- High Range 2WD
- Posts: 13
- Joined: Sun Nov 23, 2014 10:04 pm
- Town: Caledon
- Vehicle: Toyota
- Real Name: Charles
Re: toyota to ford v6 bellhousing
Thanks Scott