Ironman Recovery Hitch

What Recovery Equipment do you use.
Post Reply
User avatar
Blackadder
LR 4WD Rear Locker
LR 4WD Rear Locker
Posts: 306
Joined: Mon Sep 13, 2010 8:12 am
Town: Pretoria
Vehicle: Toyota Fortuner 3.0 D4D, Ironman Bumper, OME, Dual Battery, BFG'S, TJM Snorkel, Navstar 220 29mhz radio, LAS Pro Rear Bumper, Frontrunner Roofrack
Real Name: Thinus
Club VHF Licence: X82
Location: Centurion

Ironman Recovery Hitch

Post by Blackadder »

Has anyone used a hitch like this one that fit on your tow bar? I saw a video of a recovery on Youtube and it seemed ok, but as we all know, seeing is not always believing.
recoverykits3.jpg
recoverykits3.jpg (49.9 KiB) Viewed 5607 times
Image
OOOOMS
Top Web Wheeler
Top Web Wheeler
Posts: 19468
Joined: Tue Jul 16, 2013 7:09 am

Re: Ironman Recovery Hitch

Post by OOOOMS »

Thinus, all depends on what and where it is attached to? Usually to the tow-bar or intergrated front / rear bumper. I use similar, however depends on the strengh of your bumper (front or rear)

Standard rear towbars are not made for this kinf of impact. However modified will be able to handle the stresses!

It's quick and simple to remove and fit :thumbup:
User avatar
ThysdJ
Moderator
Moderator
Posts: 16587
Joined: Wed Oct 24, 2007 7:31 am
Town: Brackenfell
Vehicle: 2010 Hilux D4D 3.0 D/C 4x4
Real Name: Thys
Club VHF Licence: HC102
Location: Brackenfell
Contact:

Re: Ironman Recovery Hitch

Post by ThysdJ »

To tow your mate's landy around the block that is fine. As Mark says it depends on where and how your tow-bar is attached to the chassis. I would not recommend this for a serious kinetic snatch recovery, unless the tow-bar is attached to the chassis with the correct rated bolts, and even then I would be suspicious of the split pin used to attach this item to the tow-bar. Rather have dedicated recovery points attached directly to the chassis, with the correct rated bolts.

A good recovery-tip is to make sure that the weakest link in your recovery is always the soft stuff, not the hard stuff. IOW make sure your recovery points are stronger than the strap/rope. That way there are no pieces of metal flying through winscreens, skulls, legs etc etc

Rather be safe than sorry. :shock: :shock:
Thys de Jager
CEO and Refreshments Manager at Team Offroad.

2010 Hilux 3.0 D4D D/C 4x4 with GOMAD "Brood" Canopy. Tripod.
1997 Jeep Wrangler TJ 4.0 Sport. The original SFA. AGA... Gooi kole
email: thys@teamoffroad.co.za

Like Team Offroad on Facebook...
User avatar
CasKru
Moderator
Moderator
Posts: 23956
Joined: Tue Dec 04, 2007 11:52 am
Town: Benoni
Vehicle: '94 Hilux Raider 2.4i (22RE) DC 4x4
Real Name: Cassie
Club VHF Licence: B15
Location: Rynfield

Re: Ironman Recovery Hitch

Post by CasKru »

ThysdJ wrote:To tow your mate's landy around the block that is fine. As Mark says it depends on where and how your tow-bar is attached to the chassis. I would not recommend this for a serious kinetic snatch recovery, unless the tow-bar is attached to the chassis with the correct rated bolts, and even then I would be suspicious of the split pin used to attach this item to the tow-bar. Rather have dedicated recovery points attached directly to the chassis, with the correct rated bolts.

A good recovery-tip is to make sure that the weakest link in your recovery is always the soft stuff, not the hard stuff. IOW make sure your recovery points are stronger than the strap/rope. That way there are no pieces of metal flying through winscreens, skulls, legs etc etc

Rather be safe than sorry. :shock: :shock:
Ditto.

The best recovery point is a recovery point directly on the chassis and in line with the chassis. As soon as your recovery point is at an angle to your chassis you get an additional torque effect. m2cw
To God be the glory
Post Reply

Return to “Recovery Equipment”