Hi
I have a 1998 SFA with 210 000km with no hassles to date
After noise started emminating from the engine a close inspection revealed the following problems:
Two small cracks on the outside of the manifold
One big crack on the inside
Front bolt sheared off and exhaust gas blowing out and is the source of the noise
Any suggestions on:
Fixing the cracks?
Removal of the sheared stud?
Tips to remove the manifold without shearing the remaining 7 studs?
Referral to a good workshop/mechanic to perform the above?
Thank you
22R MANIFOLD PROBLEMS
- roeland.vlok
- LR 4WD Rear Locker
- Posts: 289
- Joined: Wed Oct 17, 2012 10:36 am
- Town: Pretoria
- Vehicle: 97 SFA Hilux
- Real Name: Roeland
Re: 22R MANIFOLD PROBLEMS
Jan jammer om te hoor van die manifold.
Klink vir my of dit iewers los was, maar dis altyd moeilik om te sê.
Gert Venter (072 twee 64 ses 190) sal jou moontlik kan help of kan verwys. Anders glo ek sal 'n uitlaatstelse plek die ding kan doen.
Sien jy is naby, ons moet bietjie gaan ry by Rafters as jou Lux weer reg is.
Klink vir my of dit iewers los was, maar dis altyd moeilik om te sê.
Gert Venter (072 twee 64 ses 190) sal jou moontlik kan help of kan verwys. Anders glo ek sal 'n uitlaatstelse plek die ding kan doen.
Sien jy is naby, ons moet bietjie gaan ry by Rafters as jou Lux weer reg is.
- LouisZ
- Monster Truck
- Posts: 2175
- Joined: Tue Feb 05, 2008 1:51 pm
- Town: Pretoria
- Vehicle: Toyota Hilux D/C 1996
- Real Name: Louis
- Location: Pretoria, Centurion
Re: 22R MANIFOLD PROBLEMS
Will that be Exhaust Manifold?
Cracks depends on the overall wall thickness of the piping. If it is rusted too much I wont bother. Time for replacement branch unfortunately.
The Studs should come out with a 2 nuts locked onto each other. The broken one you can google "stud removal"in Pretoria, those guys will travel to you and remove it.
Cracks depends on the overall wall thickness of the piping. If it is rusted too much I wont bother. Time for replacement branch unfortunately.
The Studs should come out with a 2 nuts locked onto each other. The broken one you can google "stud removal"in Pretoria, those guys will travel to you and remove it.
-
- Newbie
- Posts: 7
- Joined: Thu Sep 01, 2011 2:39 pm
- Town: Wapadrand Pretoria East
- Vehicle: TOYOTA HILUX RAIDER1998 SFA
- Real Name: Jan
- Location: Wapadrand, Pretoria East
Re: 22R MANIFOLD PROBLEMS
Roeland/Louis
Dankie vir julle insette
Dankie vir julle insette
- Stef
- Monster Truck
- Posts: 3125
- Joined: Mon Jan 25, 2010 12:54 pm
- Town: Pretoria
- Vehicle: '98 LTD
- Real Name: Stefan
- Club VHF Licence: X107
Re: 22R MANIFOLD PROBLEMS
ou brake fluid maak daai moere ook lekker los...drup dit op die studs met 'n skroewedraaier , cable tie of iets dergliks en laat staan sodat dit lekker in trek....
Vir die studs soos Louis sê, pasop net vir afdraai...ek sal daar ook die brake fluid ding doen voor ek 'n poging aanwend om dit uit te draai.
Vir die studs soos Louis sê, pasop net vir afdraai...ek sal daar ook die brake fluid ding doen voor ek 'n poging aanwend om dit uit te draai.
- roeland.vlok
- LR 4WD Rear Locker
- Posts: 289
- Joined: Wed Oct 17, 2012 10:36 am
- Town: Pretoria
- Vehicle: 97 SFA Hilux
- Real Name: Roeland
Re: 22R MANIFOLD PROBLEMS
Stefan, jy het nou 'n glimlag om my bakkies gesit met jou mooi Afrikaans. "Dergliks" het ek baie lank terug gehoor en sal dit ook sommer weer begin gebruik.
- roeland.vlok
- LR 4WD Rear Locker
- Posts: 289
- Joined: Wed Oct 17, 2012 10:36 am
- Town: Pretoria
- Vehicle: 97 SFA Hilux
- Real Name: Roeland
Re: 22R MANIFOLD PROBLEMS
Jan het jy reg gekom met die manifold?
-
- Newbie
- Posts: 7
- Joined: Thu Sep 01, 2011 2:39 pm
- Town: Wapadrand Pretoria East
- Vehicle: TOYOTA HILUX RAIDER1998 SFA
- Real Name: Jan
- Location: Wapadrand, Pretoria East
Re: 22R MANIFOLD PROBLEMS
Dagse Roeland
Ek beplan om volgende Saterdag die taak aan te pak
Groete
Ek beplan om volgende Saterdag die taak aan te pak
Groete
- roeland.vlok
- LR 4WD Rear Locker
- Posts: 289
- Joined: Wed Oct 17, 2012 10:36 am
- Town: Pretoria
- Vehicle: 97 SFA Hilux
- Real Name: Roeland
Re: 22R MANIFOLD PROBLEMS
Klink goed. Laat weet as jy 'n hand nodig het.