fitting lockers
- Tinman
- LR 4WD Rear Locker
- Posts: 282
- Joined: Thu Jul 31, 2008 2:12 pm
- Town: perth
- Vehicle: 1991 hilux surf with 31" kuhmo kl71's
- Real Name: Stuart
hey guys i would like to fit a rear locker probably a detroit ezy locker or something similar,
im just wondering how hard they are to fit and what tools are required, and if there is a good link to follow somewhere in the internet
its for a standard rear axle on an 85 lux
im just wondering how hard they are to fit and what tools are required, and if there is a good link to follow somewhere in the internet
its for a standard rear axle on an 85 lux
- Family_Dog
- Moderator
- Posts: 12704
- Joined: Tue May 22, 2007 10:09 am
- Town: Klerksdorp
- Vehicle: Hilux DC SFA, Hilux 2.7 DC, Hilux 2.7 SC, Prado 95 VX
- Real Name: Eric
- ORRA Call Sign: HC101
- Location: Klerksdorp, NW
- Contact:
I downloaded this some time ago, unfortunately cannot remember the url.
But it might help you.
-F_D
But it might help you.
-F_D
- Attachments
-
- Detroit EZ Locker installed in a 92 Toyota 4x4 Pickup.pdf
- (175.31 KiB) Downloaded 287 times

White Fang: 1999 2.7i DC Raider 4x4
Bull Dog: 1987 4Y-EFI 2.2 DC 4x4
Pra Dog: 1998 Prado VX 3.4
Hound Dog: 2000 2.7i SC 4x4
One Staffie, One Jack Russell, One Ring Neck Screecher, 17 Fish of questionable heritage

- Tinman
- LR 4WD Rear Locker
- Posts: 282
- Joined: Thu Jul 31, 2008 2:12 pm
- Town: perth
- Vehicle: 1991 hilux surf with 31" kuhmo kl71's
- Real Name: Stuart
how do the ez lockers perform offroad and does anyone have
any pics of when they did it and any tips?
also have any of u guys heard about aussie lockers? there similar to ez but aussie
any pics of when they did it and any tips?
also have any of u guys heard about aussie lockers? there similar to ez but aussie

- blom
- LR4WD, Lockers, Crawler Gears
- Posts: 1023
- Joined: Mon May 12, 2008 11:44 am
- Town: Landrovia
- Vehicle: xj jeep & SERIES 3 & Isuzu KB 300 Dtec DC
- Real Name: Blom
- Location: Landrovia
- Contact:
TM
These "lunchbox" lockers performs well off road (all off them)
The problem comes on road, here they do not have nice manners and will lock if in town and power is applyd around corners
they also have the tendency to "shake" the car viciously every now and then (the first time this happened to me I thought the end was near , but you get used to it after a while)
Bang for bucks there is nothing better
150kw and more motors have a tendency to eat these little lockers though
These "lunchbox" lockers performs well off road (all off them)
The problem comes on road, here they do not have nice manners and will lock if in town and power is applyd around corners
they also have the tendency to "shake" the car viciously every now and then (the first time this happened to me I thought the end was near , but you get used to it after a while)
Bang for bucks there is nothing better
150kw and more motors have a tendency to eat these little lockers though
Grensvegter van LANDROVIA
- blom
- LR4WD, Lockers, Crawler Gears
- Posts: 1023
- Joined: Mon May 12, 2008 11:44 am
- Town: Landrovia
- Vehicle: xj jeep & SERIES 3 & Isuzu KB 300 Dtec DC
- Real Name: Blom
- Location: Landrovia
- Contact:
Rule off thumb says that 70% improvement in the rear and only 30% in the front
Personally my competition truck is open in the front
Personally my competition truck is open in the front
Grensvegter van LANDROVIA
- bosjakkals
- LR 4WD Rear Locker
- Posts: 458
- Joined: Tue Dec 09, 2008 8:14 am
- Town: Harrismith
- Vehicle: 97 Hilux SFA ,31 BF's, Bullbar,Warn winch, Hunting frame, 2 spare wheels, Long range tank, High lift jack, Gearmax rear locker diff, Suspension unknown but very soft)
- Real Name: CJ
- Location: Nie weer nie
Tinman
Who suplied you and what's the cost ?
Who suplied you and what's the cost ?
03 - Cruiser 105 GX
97 - Hilux 2.4 D/C -
05 - Pajero 3.2 DID SWB ( Ma se kar)
01-Prado 3.0 d (Gesien -Geniet - GEROL))
97 - Hilux 2.4 D/C -
05 - Pajero 3.2 DID SWB ( Ma se kar)
01-Prado 3.0 d (Gesien -Geniet - GEROL))
- bosjakkals
- LR 4WD Rear Locker
- Posts: 458
- Joined: Tue Dec 09, 2008 8:14 am
- Town: Harrismith
- Vehicle: 97 Hilux SFA ,31 BF's, Bullbar,Warn winch, Hunting frame, 2 spare wheels, Long range tank, High lift jack, Gearmax rear locker diff, Suspension unknown but very soft)
- Real Name: CJ
- Location: Nie weer nie
Ag dankie tog !! Sal help as ek bietjie meer rondkyk 

03 - Cruiser 105 GX
97 - Hilux 2.4 D/C -
05 - Pajero 3.2 DID SWB ( Ma se kar)
01-Prado 3.0 d (Gesien -Geniet - GEROL))
97 - Hilux 2.4 D/C -
05 - Pajero 3.2 DID SWB ( Ma se kar)
01-Prado 3.0 d (Gesien -Geniet - GEROL))
- Tinman
- LR 4WD Rear Locker
- Posts: 282
- Joined: Thu Jul 31, 2008 2:12 pm
- Town: perth
- Vehicle: 1991 hilux surf with 31" kuhmo kl71's
- Real Name: Stuart
I come from the land down under so thats not one of my languages,
you buy the aussie locker offline only as far as i see and on average there a 1/3 of the price and they say they are easier to fit than the ez locker

you buy the aussie locker offline only as far as i see and on average there a 1/3 of the price and they say they are easier to fit than the ez locker
- Umvubu
- Low Range 4WD
- Posts: 152
- Joined: Thu Sep 13, 2007 2:51 pm
- Town: Lydenburg
- Vehicle: Hilux D/C 4Y & Hilux S/C 2.4D & Musso 602EL
- Real Name: Ezere Du Plessis
Tinman
I fitted lockrights front & rear on my single cab. WOOOOW ! WHAT A DIFFERENCE IT MAKES !
. I allready got 2 more lockrights at home to fit to my double cab.
I fitted lockrights front & rear on my single cab. WOOOOW ! WHAT A DIFFERENCE IT MAKES !

1993 Hilux 2.4D S/C - 31" Khumo Muds , Lockers F/R , OME Suspension , Snorkel , Extended Shackles etc
1996 Ssanyong Musso 602EL - OME Suspension
1996 Ssanyong Musso 602EL - OME Suspension
-
- Information
-
Who is online
Users browsing this forum: No registered users