bODY LIFT
- Hoppy
- Monster Truck
- Posts: 5784
- Joined: Mon Jan 07, 2008 10:15 pm
- Town: Cape Town
- Vehicle: Hilux SFA & IFS
- Real Name: Allan 0721291160
Re: bODY LIFT
I am busy machining a set, they are R 600.00 for a 5omm set of 16
aev@iburst.co.za
The trouble with trouble is...it always starts as fun.
The most precious jewels you will ever wear around your neck is the arms of your children...
" I WOULD RATHER SIT ON THE TAILGATE OF MY HILUX WITH A BEER AND A CHOP, WATCHING A FIRE, THAN DINE IN THE BEST RESTAURANT IN TOWN "
- Maniac
- Low Range 4WD
- Posts: 140
- Joined: Tue Dec 18, 2007 5:24 pm
- Town: Durbanville
- Vehicle: 1993 Hilux SFADC
- Real Name: Manie
- Club VHF Licence: X25
- Location: Durbanville
Re: bODY LIFT
R50 each thus. Makes sense if you think setting up, parting, drilling hole on lathe..... machinist has to be paid as well???? Hoppy ek soek ook 'n set asb, net 25mm vir my as dit kan.
93 D/C Hilux Not 4Y, 33" Bighorns, 29 MHz, OME 3" Lift
No Ditch Too Deep, No Hill Too High!!!
No Ditch Too Deep, No Hill Too High!!!
- Sifu-Lux
- LR 4WD Full Lockers
- Posts: 636
- Joined: Tue Sep 11, 2007 9:46 pm
- Town: Mount Vernon Illinois
- Vehicle: GMC Sierra SLT Z71 (Used to drive a '91 SFA Hilux YN67R 4x4 ,Full OME, ARB lockers front and rear, Ford 3L V6, 35mm axle move, 33" General Grabber X3's and dual transfer cases....... Keep her safe Mud Dog!
- Real Name: Andrew
Re: bODY LIFT
Actually, R600/16 = R 37.50ea
Average machinest @ R 140/h (internal cost) + material = not bad
Average machinest @ R 140/h (internal cost) + material = not bad
Sifu-Lux....I will miss you
- TOYMAD
- High Range 4WD
- Posts: 32
- Joined: Mon Jun 15, 2009 8:26 pm
- Town: Bellville
- Vehicle: 1995 HILUX SFA S/C 2.4D, FORTUNER 4X4 3.0 D-4D
- Real Name: Marcel
Re: bODY LIFT
Yes Hoppy, I'm also wanting 25 mm for a single cab SFA (CAB & LOAD BIN) Price please!
LEGENDARY1995 SFA TOYOTA HILUX SC 4X4 2.4 Diesel
- Maniac
- Low Range 4WD
- Posts: 140
- Joined: Tue Dec 18, 2007 5:24 pm
- Town: Durbanville
- Vehicle: 1993 Hilux SFADC
- Real Name: Manie
- Club VHF Licence: X25
- Location: Durbanville
Re: bODY LIFT
I CAN at least lift heavy stuff too :D :D
93 D/C Hilux Not 4Y, 33" Bighorns, 29 MHz, OME 3" Lift
No Ditch Too Deep, No Hill Too High!!!
No Ditch Too Deep, No Hill Too High!!!
- Bloues
- LR 4WD Full Lockers
- Posts: 934
- Joined: Thu Jul 23, 2009 12:49 pm
- Town: Roodepoort
- Vehicle: Hilux 2.2 D/C
- Real Name: Solly
Re: bODY LIFT
Dis regtig nie so duur - ek het 2 jaar terug R800 betaal.......so hou jou prys !!!!! :)pampoen wrote:Y so expensive?
Kry ek komissie ???
Bloues
(Nie blou bul maar SHARKS ondersteuner)
Don't fence me in.....
'91 D/Cab 2.2(4y) AKA - Bloues. Lifted Suspension, Dual Battery, 80Liter Freezer, Bridgestone Dueler A/T, 29Mhz Radio, Mud Creeper Winch(Aus), EasyAwn Rooftop Tent, Roofrack, Garmin Nuvi, Long Range Fuel Tank, Jacks+straps for landi recovery.....
(Nie blou bul maar SHARKS ondersteuner)
Don't fence me in.....
'91 D/Cab 2.2(4y) AKA - Bloues. Lifted Suspension, Dual Battery, 80Liter Freezer, Bridgestone Dueler A/T, 29Mhz Radio, Mud Creeper Winch(Aus), EasyAwn Rooftop Tent, Roofrack, Garmin Nuvi, Long Range Fuel Tank, Jacks+straps for landi recovery.....
Re: BODY LIFT Blocks For Sale
I have a full set (16 pieces) of 50mm Black Nylon Body Lift Blocks
For Sale in Cape Town
R600 cash
PM me if interested.
For Sale in Cape Town
R600 cash
PM me if interested.
-
- LR 4WD Full Lockers
- Posts: 601
- Joined: Thu Jan 24, 2008 10:31 pm
- Town: Gordons Bay
- Vehicle: 2011 Hilux DC 3.0 D4D
- Real Name: Luke
Re: bODY LIFT
Managed to get myself a 1000mmX50mm bar of Acetal http://www.durbanplastics.co.za/engineering.htm at R275 from durban plastics,cutting to 50mm blocks cost me a sore arm{used a hacksaw}bolts cost me R50 from autozone.
With each replacement of parts, a car slowly becomes Chinese.