Hilux 4x4 Forum

Great work and an awesome looking display!! I would love something like that in my KZ.

If you ever put a kit together you have a buyer here

Stefan, thank you for helping me out with understanding these circuits, i appreciate it :thumbup: It is always good to have an understanding of how these things work. I must admit i was a bit stumped and i didn't quite understand how the high beam/ low beam wiring on these Hilux's worked but i have ...

Chris, i just finished a quick test rewire following the wiring diagram you suggested and it works perfectly, switch and all. Wiring in the headlamp commons to pin 85 was the key. I just need to get some more wire to run through to the switch tomorrow as the 4mm wire i had is a bit overkill but i ca...

I found this diagram on an Australian 4wd forum for negative switching (which the IFS is if i'm not mistaken)? negative drivinglightwiring-earth.jpg I have wired it up according to this diagram and everything works perfectly as initially wanted. The lights dim even when the switch is off and everyth...

It is just a manual switch, so i am not sure why there are so many pins on it. I think i have just found the post you are referring to thanks Chris. I have a decent understanding of how the relay works but i am still a bit unsure of what should be wired up to the + In on the switch? I would ideally ...

Thanks Chris for the tips, that made my life a lot easier. Ok this is the diagram that Lumeno sent me when i asked for a wiring diagram of the switch. rsz_switch.jpg I currently have the "Earth for on indicator light" - wired to earth the + In - wired to parks and the + out - wired through...

It actually has 5 for some reason. I am just busy trying to figure out how to post a picture and then i can attach the wiring diagram for the switch and point out where i have connected my park lights, earth etc. Sorry, still a newbie

As soon as i get some time i will rewire the switch and relay as suggested and post to let you know how it works out. Thanks again for the speedy help

Thanks for such a quick reply CasKru. That makes sense and would explain why my lights won't dim when the switch is at the off position. I would imagine that as long as my switch is earthed the problem may persist? Do you have any suggestions beside maybe removing the switch all together? Thanks Jet...

Hi all I am still new to the forum and would like to find out if anyone has some advice for me. I recently installed a set of 30w LED spot lights to the nudge bar on my Hilux KZ-TE using the wiring diagram i found on the forum (which was really helpfully, thank you benhur) as i guideline . I decided...

Good afternoon My name is Jethro Ross and i am new to the forum, but i have been following it for a while. I own a 2004 3.0 KZ-TE DC 4x4 Legend 35 and really enjoy it. I will try to post some pictures shortly, once i get the hang of things. I'm always keen to learn and look forward to some more inte...