Hilux 4x4 Forum

Hi Johan,

Please provide more info, on your KZ-TE system.
I would definitely be interested in that.

Regards

Wat's die koste van die superspring?

Dankie

hi

What het hulle jou gevra vir die toets?
Op my laaste diens het ek 'n compressie toets gedoen, en geslaag. :)

hoop vd beste met jou bakkie

Good day All I need advice on how to drill the hole for the EGT sensor, some say, you just drill it with the engine running, revving it a bit to help blow the metal shaving out so that they don't go through the turbo. others say use a magnet after you drilled the hole. I know the safest way is to re...

Good day, I have some questions, hopefully I am not hijacking this topic, if I am apologies. 1: bigger down pipe, where can one get the "correct" down pipe. 2: bigger exhaust, where and who can provide? 3: if you say standard exhaust and viscous fan is useless, with what size do you replac...

Good day All

Thanks for the help.
Got it sorted yesterday afternoon, got a Timken bearing for R40.
the Pliers cost more then the bearing.
But now I got a new tool for the tool box.

All is happy once again.

Hi

Thanks now for the next question, what is the part number?

Good day All I am in need of some assistance, this morning one of the tensioner pulley's on the bakkie packed up, lucky I wasn't to far from home, so I turned back. Now my next question is, where can I get another pulley, and is this a DIY job? are there any special tools or process involved, I an a...

Hi

What I am going to ask is off topic, but could you please post a pic of the top mount intercooler.

I contacted SAC and the told me they only do the bottom(bash plate) intercooler.

Good luck with the sick KZTE!! never nice to see your baby sick!!
Regards

Gompie, I need info please, why the non return valve on the main supply? the way my setup is currently, I don't think I need a non return valve. I think I need to make a correction on my drawings, the "valves" in the pictures are actually taps, that I can open or close, the bypass tap is n...

I have a water system at home, From the main supply it goes to the tank, from the tank to a pump and from pump to home. I did install a bypass from the main supply to the home, bypassing the tank and pump, in-case of a power failure, I an stuffed if water and power is out at the same time, since my ...

Hi

What is the price of the down pipe?

Good day

I would like 19 and 34 please
Hoping that something goes my way for a change.


Regards

Very nice!!!! what's the total KG's op the packing system? how did you manage to fasten it to the bakkie??

Cool Thanks!!

Hi OOOMS

Can I spray the gleen green on the inside of the hub as well? where the break pads are, or do I only clean the inside of the hub with a cloth?

Okay so side shaft fixed , will see if it stays fixed, now how do I clean the hub of all the diff-oil that leaked out? the back of the drum is still has that "wet' look.

Thanks will give him a call!!! I am not in the mood to stuggle like I did last time!!!

Good day all!! I have a problem, on my beloved 2004 KZTE, the right rear side shaft started to leak, somewhere in the last week, only noticed it on fryday afternoon. I don't have the tool or the expertise to do the job on my own, nor the time for the next two months as we are in the proses of a majo...

Prys?? en gaan hy pas op die KZTE

Posted on 4x4community.

Hope somebody can assist! good luck!!!!

Hi Mark

If you remember the name or where in JHB the place is please let us know!

does he service diesels aswell???

Me Tooooo!!!!!

die een by menlyn??

kontak details asb!!!

Hi All Okay so as it stands now, the KZTE will be going to a auto electrician, I swapped out the switch yesterday, and still nothing, I connected the switch before I installed it and it worked, with the bakkie switched off, after I installed the switch, and connected it up, nothing!! when the bakkie...

Hi

I will give it a try, the switch is not that expensive, I now know where it sits!! the bakkie has about 145000KM on.
how can I check for a bad earth at the back? I do have a hella plug at the back, but its not low enough to make contact with the brake light housing.

Its really frustrating!!!

Hi All I have a problem with my brake lights, they work intermittently, the indicators and revers lights work, fine, when I switch on my lights, the back lights also comes on, but when I step on the brakes, nothing. I have check the bulbs, fuses, check the trigger at the pedal(with the help of Ocker...

Good day, all I have a couple of questions, about KZTE motors 1: what is the best place to have a intercooler fitted? (I have a onca bulbar, so position might be a issue.) 2: who can check the status of my injectors? 3: my 150 000Km service is coming up, what does it include, who can do it and what'...