Hilux 4x4 Forum

damazon

Check the battery size, I had the same problem, and I had the wrong size battery in.

I would check the correct number from my invoice and post but I am out of the country till next weekend.

damazon

jacques kotze wrote:Ok, So I bought a Sachs, it was delivered today with courier, the box is a Sachs, but the clutch itself has got Aisin stamps on it. Is it the same clutch or are they bull$h!tt!ng me?

Not sure

damazon

Wat kom Toyota mee uit, is dit nie beter om n clutch by Toyota te koop en dit self in te sit nie? Of is Sachs n beter roep. Jacques, apparently they do both Sachs and Luk when they come out new, just depends what is in stock. When they replace though I think you can insist, if they don't have stock...

damazon

I had SAC do it, just told them that they must put in a Sachs, Toyota themselves will also do it if you specify.

damazon

Jacques without doubt you must put in a Sachs!!

damazon

Thabogrobler wrote:Ek soek ook nog...

Hi Thabo did you not get that one from Philip?

damazon

Eezi-awn themselves are in Honeydew Johannesburg 011 7946311

damazon

damazon

Its monday bud???

we waiting

damazon

Awesome!! Thanks Cassie!

damazon

When you get a cance please Cassie

damazon

Cant seem to up load, but anyway its a really bad picture as I dont have flash.

Rather you have a nice surprise when you get ForYota back

damazon

Power failure in the area so went across to check how Darryl doing on ForYota!

At least the back is done and looks really good, struggling a little on the front to finish but getting there!!

Do you want a picture of the back? Have one on my phone but its really bad quality?

damazon

Hi Hennie, I work directly over the road from Darryl and saw ForYota being worked on!! You wont be sorry!

damazon

I think what they mean is they will not accept emergency passports for a routine visit.

damazon

chopper wrote:Thank you Dave
Where would 1 find another mag like that - for a spare

Chopper Im not sure about where you could get a spare. Sorry

damazon

sakkie4x4 wrote:I bought mags two weeks back and fitted them, but on my SFA the offset of -10 didn't work. I'm running brand new 30x9.5x15 BF's,will they work on those mags?

Not sure, maybe Hoppy can help?

damazon

chopper wrote:Allan,
Will they take 30x9,5s or are they too "wide" for that - rather 31x10,5s?
Thank you

Not sure about the 30x9.5 but I had 31x10.5's on and they really looked the business

damazon

Good condition, to much off-set for my Hilux R2000 to R1800 - SOLD

damazon

Brand new, drove straight to fitment shop for sliders R1000. Reduced to R800

damazon

Hi Mofasa

I am going to Durban on the 21/03 and if you can wait till then I am returning on 24/03. Is it just the block or a complete engine and tranny? I dont have much space in the back of the van as I have a drawer system in!!

damazon

I have a very good ride on the Mikem coils, havent got his shocks though. I have Maxtrac Nitro remotes that I fitted earlier but his coils and springs made a big difference to the ride quality after fitting.

Best to speak to him, he will give the best advice and not rip you. That i can guarantee.

damazon

Consider Mikem, have heard no bad reports, and I have bumper replacement with Mikem coils in front.

Daryl from Mikem is on the forum as well!

Price is excellent

damazon

CasKru wrote:Someone else had a simular problem and they just inserted a "spacer" between the loadbin and the armadillo

Wouldnt that lift the rollbar above the roofline of the cab? If I remember correctly the roll bar sits on plates above the armidillo?

damazon

Tarquin wrote:dave when you changed the clutches was the release bearing alright? did you put in a new clutch kit?

both done by SAC Boksburg, they tell me they replaced everything that needed replacing. Not too mechanical when it comes to big things in a car!!

damazon

It does. So its not a big issue then? Personally I dont think it is! Done 200k+kms and have had 3 clutches and all have done this from time to time with different intensity and also it comes and goes. So I dont think so. Check out some other posts around the forum regards this same topic. They also...

damazon

Does it go away if you depress clutch? If it does its a common problem and I have had it on all 3 clutches I have had in my D4-D. Just get used to it, I have had to

damazon

Same on my 2.5 D4D

damazon

True, that is it, sonbesie effek, I love it! Mine also comes and goes, but usually it was only for a short while, it's been constant for 4 days now. Irritating to say the least, and I do not even want to open my window (I like boere-aircon!). Anyway, Toyota will replace it under warranty, so I have...

damazon

210 000kms, 2nd new clutch in now and both replacement clutches have done that.

It also comes and goes and noise levels of different intensity at different times.

It seems a common problem

damazon

No problem, laat my weet.

damazon

Phillip ek weet dis n long shot maar dalk is die unit se binnekant dieselfde: http://www.hilux4x4.co.za/views/viewtopic.php?f=132&t=29263" onclick="window.open(this.href);return false; Hi Phillip, dit is presies die selfde. Ek het van Hybrid n stel gekoop en desember maand die hele lo...

damazon

Too expensive!!

damazon

Ali3n wrote:I can supply it if you are interested. 3M sheets.

How much for a 3m sheet? Very interested

damazon

Philip, Paying it forward? Good on you, mate! In any case, I'm also looking for a D4D scoop, willing to pay for it, should there be one lying around at someone else? Sorry seem to have missed this thread for some reason. Thabo, If you need it go for it bud! I was just considering a double intercool...

damazon

Hi had chip intercooler and free flow exhaust fitted Stats as follow: chip fitted: 99.6Kw @3500rpm, 283.2Nm @2500rpm exhaust fitted: 104.4Kw @3500rpm, 294.7Nm @2000 rpm Intercooler: 116.5Kw @3500rpm, 355.2 @2000rpm Not in 3.0L territory but close! I had 31x10.5x15 fitted in November after running 24...

damazon

Warm Patat wrote:I have one that you can take over, pm me if you are interested. Philip

If its not taken I will be interested. How much do you want for it?

damazon

When I bought my srx it came out with 205/70/16 if I remember correctly

damazon

Welcome!

damazon

I'm in
1: Ali3n
2: Rafs
3: Cleaner
4: Mofasa (Johno)
5: Dutch07 (Tyrone)
6: Wimvil (Wimpie)
7: Wimvil Friend (JD)
8: Lollie (Dawie)
9. Donkey
10.Bugzy
11. Die$eL
12. Johanm
13. 4x4Maniac
14 justinmartin
15. Willem01
16. Legendary (Rob)
17. Damazon

damazon

Thanks Cassie

Attached a pic to show where the connector is situated.

damazon

Seem to have it sorted, when they fitted the protector over the alarm system, they had to join the wires at the door control unit which is situated next to airvent above cubby hole. A wire had pulled back in the plug, and was making contact intermittently!! Sorted.

damazon

Couldnt find anything wrong! Even changed battery in remote!! Still wont unlock but is locking again

damazon

Will check behind cubby hole as well tomorrow

damazon

I have something similar. But its just on my central locking where it wont unlock but will lock but yesterday progressed to no lock or unlock. It started after I had a toyota approved cover over the alarm system in engine compartment and a plate over ecu behind cubby hole, fitted. I will check all c...

damazon

Not sure Thabo, will check and let you know

damazon

My exhaust is from just beyond the turbo

damazon

Sorry not 118 actually 116.5 Stats as follow: chip fitted: 99.6Kw @3500rpm, 283.2Nm @2500rpm exhaust fitted: 104.4Kw @3500rpm, 294.7Nm @2000 rpm Intercooler: 116.5Kw @3500rpm, 355.2 @2000rpm That is a lot, I also have a intercooler in my 2,5 but with a lot less power than yours. Like I said, only 9...

damazon

Sorry not 118 actually 116.5

Stats as follow:
chip fitted: 99.6Kw @3500rpm, 283.2Nm @2500rpm
exhaust fitted: 104.4Kw @3500rpm, 294.7Nm @2000 rpm
Intercooler: 116.5Kw @3500rpm, 355.2 @2000rpm

damazon

What fuel consumption do you get on your 2.5 d4d? I get average of 8.7-9.8km/l Is the engine under powered? YES Is this a problem for 4x4'ing and sand driving. Yes, the reason is when you go on holiday the vehicle is loaded Does fitting a chip & intercooler really make a difference? a HUGE diff...

damazon

Lollie wrote:
Lollie wrote:Donkey
I buy all my alu materials from METALS CENTRE CC.They are in Booysens tel 011 493 -4941 .They also cut the sheets to the size you needed.
Donkie

They do lazer cutting as well

I also do, and they are reasonable

damazon

Dont know what happened to the pics, try again

damazon

Hi Guys Sorry for delay in reply, just got back last night late from Lusaka via Harare. Blanche, my van pulled like a train, very sweet!! Anyway, I treated her to a nice pamper, full house wash!! I swear she smiled at me!! :laugh2: @Mark, difficult to measure exact but in the region of about 550mm x...

damazon

sure thing, I will measure

damazon

@ Mark, I"m not sure what size intercooler it is bud! Its the one from SAC!

As pointed out, once you start tinkering with the 2.5 the bug bites and you cant stop!!

but its all good

damazon

Ok had the intercooler fitted,!! Stats as follow: chip fitted: 99.6Kw @3500rpm, 283.2Nm @2500rpm exhaust fitted: 104.4Kw @3500rpm, 294.7Nm @2000 rpm Intercooler: 116.5Kw @3500rpm, 355.2 @2000rpm Not in 3.0L territory but close! Have just arrived in Lusaka after a trip through Botswana and Zimbabwe. ...

damazon

I had SAC (Dastek) chip fitted about 18 months ago and kw went up to 92 from 74. I had SAC free flow exhuast fitted last week and kw went up to 102, but what was great was torque figures, up from 220/1500 rpm to 280/1500 rpm. Very very little lag!! like a new truck. I did a trip to Durban from Jhb a...

damazon

I hear you Dewald, have the same problem!! Exactly the same!!

damazon

I had the problem initially when burning MP3 on my home PC and work PC. It depends on the software definitely, I have Roxio at home and when burning a disc I have to go to the 'Make Jukebox'. On my work laptop I have CDBurnerXP and I have to go to 'Data Compilations'. Hope this helps! Its definitely...

damazon

Search found 70 matches