Search found 69 matches

by Moonunit
Mon Nov 16, 2015 5:58 pm
Forum: Toyota Prado 4x4 Forum
Topic: Prado VX Diesel 2011
Replies: 2
Views: 4113

Re: Prado VX Diesel 2011

Thanks Knuppel for the feedback. According to Toyota they don't have any for the Hilux's or Prado's. Guess the parts guy didn't check or offer the Hilux cause then he would've said its different part numbers. So spoke to APS, they said they see this all the time, apparently it is caused by the diese...
by Moonunit
Mon Nov 16, 2015 9:45 am
Forum: Toyota Prado 4x4 Forum
Topic: Prado VX Diesel 2011
Replies: 2
Views: 4113

Prado VX Diesel 2011

Hi All Picked up a Prado VX diesel on the weekend, it has a slight problem while cruising every now and then, where it has a slight stutter under light throttle, if I press the accelerator slightly harder it goes away. The previous owner did take in to Toyota(George) to sort out the problem but they...
by Moonunit
Tue Jan 20, 2015 10:33 am
Forum: The Workshop
Topic: Saggy bum (SFA)
Replies: 16
Views: 2120

Re: Saggy bum (SFA)

Ah ok so no retensioning even if adding another leaf, just add the leaf.

Doing it myself is not the issue, got a complete mechanical engineering workshop, time is the issue.

Thanks for the advice and clearing up the misconceptions I had!


Sent from my iPhone using Tapatalk
by Moonunit
Tue Jan 20, 2015 7:40 am
Forum: The Workshop
Topic: Saggy bum (SFA)
Replies: 16
Views: 2120

Re: Saggy bum (SFA)

Right so where is Mikem based? 4xLux does the same/similar mod, but just adds a leaf with out retensioning the springs. He had a special on the forum somewhere, I remember there being some interesting comments. It makes sense that the springs would need retensioning otherwise would the new leaf not ...
by Moonunit
Mon Jan 19, 2015 9:02 pm
Forum: The Workshop
Topic: Saggy bum (SFA)
Replies: 16
Views: 2120

Re: Saggy bum (SFA)

Spoke to Saayman spring works and they recommend adding an additional leaf. The guy said he had seen this problem on many OME springs/leaf sets. Quoted R7000 to do the whole lot including retensioning the old springs. Don't know if this is a decent price.


Sent from my iPhone using Tapatalk
by Moonunit
Thu Jan 15, 2015 6:00 pm
Forum: The Workshop
Topic: Saggy bum (SFA)
Replies: 16
Views: 2120

Re: Saggy bum (SFA)

Thanks guys appreciate the responses.


Sent from my iPhone using Tapatalk
by Moonunit
Thu Jan 15, 2015 3:00 pm
Forum: The Workshop
Topic: Saggy bum (SFA)
Replies: 16
Views: 2120

Saggy bum (SFA)

This seems to be a common problem with SFA's, that the rear starts drooping because of the leaf springs. I have a 1998 SFA LTD which has OME suspension. Bought it with the suspension already on so cant say how old it is. After a little research I have seen people do a "Zuk" mod, basically ...
by Moonunit
Thu Nov 20, 2014 8:29 pm
Forum: General Hilux Discussions
Topic: My consumption changed for the better
Replies: 20
Views: 3547

Re: My consumption changed for the better

Not a hilux but noticed Engen Primax gives the best results with my lumina, I would say similar to using octane booster. Afaik all petrol is the same barring the additives the different petrochemical guys add.


Sent from my iPhone using Tapatalk
by Moonunit
Wed Nov 19, 2014 1:02 pm
Forum: Open Discussion
Topic: CHIP IN KAAP
Replies: 27
Views: 3174

Re: CHIP IN KAAP

There is Mace in the Southern Suburbs, very good hands on tuners.


Sent from my iPhone using Tapatalk
by Moonunit
Mon Oct 27, 2014 9:48 am
Forum: Western Cape
Topic: 4WD Club/Toyota Atlantis fun day 2014
Replies: 61
Views: 8842

Re: 4WD Club/Toyota Atlantis fun day 2014

Well done to all that participated!


Sent from my iPhone using Tapatalk
by Moonunit
Sun Oct 26, 2014 9:41 am
Forum: Members in publications
Topic: Hilux feature in Car Magazine
Replies: 25
Views: 11620

Re: Hilux feature in Car Magazine

Well done guys!!


Sent from my iPhone using Tapatalk
by Moonunit
Thu Oct 09, 2014 5:27 pm
Forum: Late 2005 - 2016 Hilux (Gen 6 aka Vigo-shape)
Topic: 63mm versus 75mm Freeflow
Replies: 23
Views: 7474

Re: 63mm versus 75mm Freeflow

Anyone know the size of the exhaust outlet on the turbo? Would say go with that or slightly bigger and possibly have a new flange made to accommodate the bigger pipe. Agreed with Thabo no back pressure required from the exhaust, so size not too critical, back pressure built by the turbo itself. Sent...
by Moonunit
Wed Oct 08, 2014 5:13 pm
Forum: The Workshop
Topic: Speed limiter removal
Replies: 23
Views: 4609

Speed limiter removal

I know my 2.7 Vigo hits the rev limiter at around 200km/h(on the clocks) in 5th. Had the limiter on my Lumina moved to 500km/h, this is done via the ECU, obviously can't do that speed but let's just say she is good for 300km/h. Looked at having my 2.7 tuned and they can't do it via the ECU and have ...
by Moonunit
Mon Oct 06, 2014 5:14 pm
Forum: Late 2005 - 2016 Hilux (Gen 6 aka Vigo-shape)
Topic: So moet n HILUX lyk
Replies: 9
Views: 2636

Re: So moet n HILUX lyk

Wonder how the road noise is on those tyres


Sent from my iPhone using Tapatalk
by Moonunit
Sun Sep 21, 2014 9:15 am
Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
Topic: How to put your SFA's headlights onto relays.
Replies: 25
Views: 14902

Re: How to put your SFA's headlights onto relays.

Sorry not working. Thanks for the info!


Sent from my iPhone using Tapatalk
by Moonunit
Sat Sep 20, 2014 1:03 pm
Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
Topic: How to put your SFA's headlights onto relays.
Replies: 25
Views: 14902

Re: How to put your SFA's headlights onto relays.

For those who cannot wait for us to manufacture the fix, I added it to my shop so long. I've put it up at a lower price as originally planned. When we get the fix we will sell it is a separate plugin unit for the vehicle which need it. The harness is at http://www.4x4direct.co.za/shop/index.php?mai...
by Moonunit
Mon Sep 15, 2014 10:19 pm
Forum: The Workshop
Topic: Head gasket blown - Cost estimation to fix?
Replies: 30
Views: 11734

Re: Head gasket blown - Cost estimation to fix?

Hmmm just had my head redone and had to spend R7k on getting it sorted....took my Bakkie in and collected a week later. It is a 22R. If I had known all this I would've just bought a new head


Sent from my iPhone using Tapatalk
by Moonunit
Sat Sep 06, 2014 1:09 pm
Forum: The Workshop
Topic: free flow exhaust 5l motor
Replies: 4
Views: 873

Re: free flow exhaust 5l motor

Afaik 5L is non turbo, so it would have no effect doing the down pipe mod. A free flow would help though for a bit more power.


Sent from my iPhone using Tapatalk
by Moonunit
Wed Aug 27, 2014 7:17 am
Forum: The Workshop
Topic: nitrous oxide boost
Replies: 10
Views: 2470

Re: nitrous oxide boost

Nitrous does work when done properly with a proper controller and preferably linked to the ECU to pick up WOT. It's these badly done installations or user error that puts pistons through the block. With that said only a certain shot of nitrous can be used on stock internals because the 75kw+ (or mor...
by Moonunit
Thu Jul 31, 2014 10:37 am
Forum: Open Discussion
Topic: Strike Action
Replies: 45
Views: 4855

Re: Strike Action

Good work! Already handed out 2 warnings in the past 2 days. Working these guys out one by one. Decided all new employees will remain on contract or use labour brokers. Gatvol of their bollie.
by Moonunit
Tue Jul 29, 2014 10:30 am
Forum: Open Discussion
Topic: Strike Action
Replies: 45
Views: 4855

Re: Strike Action

We also with Neasa but my staff have come back. Unfortunately Neasa does not have enough power in the industry to dictate. They can continue as long as they like it will make very little difference this round, but i honestly hope they have the majority in 3 years time cause they do look out for the ...
by Moonunit
Mon Jul 28, 2014 11:00 am
Forum: The Workshop
Topic: Leaking Radiator
Replies: 8
Views: 1227

Leaking Radiator

Spoke to Allen and Francois, they recommended the 2.4D radiator as it has a thicker core but it is a bolt on fit and requires no modification. Will ask Francois to change thermostat as well.

Thanks for the advice all!
by Moonunit
Fri Jul 25, 2014 8:38 am
Forum: The Workshop
Topic: Leaking Radiator
Replies: 8
Views: 1227

Re: Leaking Radiator

Thanks for the feedback guys! Always a wealth of knowledge here.

Anymore input/experience always appreciated


Sent from my iPhone using Tapatalk
by Moonunit
Thu Jul 24, 2014 5:04 pm
Forum: The Workshop
Topic: Leaking Radiator
Replies: 8
Views: 1227

Leaking Radiator

HI all Need some advice, got a 1998 LTD SFA with a 22R. Previous owner put in a new radiator but it seems it is leaking. Rather than repairing I want to replace with new. Spoke to my local CHE(Cape Heat Exchange) and they recommended building a copper radiator for around R3500.00 installed. It will ...
by Moonunit
Mon Jul 21, 2014 6:26 pm
Forum: The Workshop
Topic: Wat is jou 2.4 22R / 2.2 4Y se olie gebruik oor die algemeen
Replies: 12
Views: 1897

Wat is n 2.4 22R se olie gebruik oor die algemeen

About 1 pint every 1000km sometimes it needs more sometimes it needs nothing.

Got 273000 on the clock and I know she smokes under full throttle but seldom use the second stage if the carb.

Good topic I was also wondering about this


Sent from my iPhone using Tapatalk
by Moonunit
Sun Jul 06, 2014 9:19 am
Forum: Humor
Topic: Speed is not everything!!
Replies: 10
Views: 2212

Re: Speed is not everything!!

Haha


Sent from my iPhone using Tapatalk
by Moonunit
Tue Jul 01, 2014 4:15 pm
Forum: Open Discussion
Topic: Strike Action
Replies: 45
Views: 4855

Re: Strike Action

Had about a third of my crew in today and them some coming in for night shift. It is a pain tbh cause these people don't realize the negative long term effects they are causing. Wish I was rich enough like these guys to take a month off work unpaid.


Sent from my iPhone using Tapatalk
by Moonunit
Fri Jun 27, 2014 12:49 pm
Forum: The Workshop
Topic: 1998 SFA Diesel Conversion Input
Replies: 13
Views: 3660

1998 SFA Diesel Conversion Input

Thanks for the feedback guys. Not planning on big tyres as the Bakkie spends a lot of time on the road.

Hmmm had my heart set on keeping all Toyota but by the sounds of it the WL25 is the way to go

Any more input/experience is appreciated


Sent from my iPhone using Tapatalk
by Moonunit
Thu Jun 26, 2014 12:58 pm
Forum: Open Discussion
Topic: What a shift of mindset!
Replies: 20
Views: 2668

Re: What a shift of mindset!

Well done on the show and sounds like you enjoyed the experience!
by Moonunit
Thu Jun 26, 2014 12:53 pm
Forum: The Workshop
Topic: 1998 SFA Diesel Conversion Input
Replies: 13
Views: 3660

Re: 1998 SFA Diesel Conversion Input

dustbuster wrote:WL 2.5 is the you can buy every thing off the shelf
When you say off the shelf, you mean for the conversion or in terms of spares?
by Moonunit
Thu Jun 26, 2014 11:56 am
Forum: The Workshop
Topic: 1998 SFA Diesel Conversion Input
Replies: 13
Views: 3660

1998 SFA Diesel Conversion Input

Hey fellow Hilux'ers Been contemplating this for a while, I have a 1998 LTD SFA with the 22R motor that I want to do a diesel swop into. I am sure this topic has been discussed plenty before but I want some current input from guys who have done the conversion as well as any other input. I have drive...
by Moonunit
Thu Jun 26, 2014 10:14 am
Forum: Open Discussion
Topic: Mig / Co2 Welding cost calculations
Replies: 1
Views: 473

Re: Mig / Co2 Welding cost calculations

Welding costs are a tricky one, depends on client type of work, specifications of job. Is it production work or one offs? I use a base rate of R500/M for fitting and welding, but everyone of our jobs are different so it is also dependent on the job. That is for manual welding. Sent from my iPhone us...
by Moonunit
Wed Jun 25, 2014 6:42 am
Forum: Meet the People
Topic: Who is the Russian Jack?
Replies: 45
Views: 5519

Re: Who is the Russian Jack?

Welcome


Sent from my iPhone using Tapatalk
by Moonunit
Thu Jun 19, 2014 10:02 pm
Forum: Engine conversions (Lexus/7M-GE/3RZ-FE etc)
Topic: Another Lexus conversion
Replies: 9
Views: 2035

Re: Another Lexus conversion

Very nicely done! Looks good


Sent from my iPhone using Tapatalk
by Moonunit
Wed Jun 18, 2014 4:44 pm
Forum: The Workshop
Topic: Own vehicel services
Replies: 12
Views: 2403

Re: Own vehicel services

Chat to Francios from 4xLux, he took over Hoppy's shop. Service both my lux's with him


Sent from my iPhone using Tapatalk
by Moonunit
Tue Jun 17, 2014 11:08 am
Forum: Build your own:
Topic: Recovery Points
Replies: 8
Views: 2110

Re: Recovery Points

Rear would be much easier to work with, noticed the hoops in front of the Vigo. Fitted a 50x50x5 square tube with a 20diameter round bar rolled to a 76 mean diameter, to a friends fortuner. Unfortunately don't have a pic of it. It bolted in in place of the tow bar. Sent from my iPhone using Tapatalk
by Moonunit
Mon Jun 16, 2014 12:22 pm
Forum: Build your own:
Topic: Recovery Points
Replies: 8
Views: 2110

Re: Recovery Points

http://shop.4x4-heaven.net/images/13757619188382052611796.jpeg This is basically what I had in mind. Might make it a bit longer for easier access while minimising ground clearance issues. Will most likely do an SFA first then Vigo. I unfortunately do not have an IFS anymore to do testing on, althou...
by Moonunit
Sat Jun 14, 2014 12:37 pm
Forum: Build your own:
Topic: Recovery Points
Replies: 8
Views: 2110

Recovery Points

Hi Fellow Hiluxers I know this topic has been discussed to death and I did some searches on the forum. I have been contemplating making up some recovery points for my SFA, basically doing all the design work and testing. Should it work out then offer them to the forum. My thinking is cutting M/S pla...
by Moonunit
Sat Jun 14, 2014 12:22 pm
Forum: Pictures Only - Post a pic of your Hilux
Topic: Uo toppie! 93 SFA D/C 4x4
Replies: 15
Views: 4452

Re: Uo toppie! 93 SFA D/C 4x4

Very nice Hilux!


Sent from my iPhone using Tapatalk
by Moonunit
Thu Jun 12, 2014 7:24 pm
Forum: General Hilux Discussions
Topic: HILUX REAR SUSPENSION UPGRADE FOR TOWING
Replies: 10
Views: 2736

Re: HILUX REAR SUSPENSION UPGRADE FOR TOWING

stephanvaneeden wrote:Moet net nie die add a leaf opsie try nie.
Been there, done that.
What is the problem with doing this?


Sent from my iPhone using Tapatalk
by Moonunit
Mon Jun 09, 2014 1:14 pm
Forum: General Hilux Discussions
Topic: Propshaft repairs - Cape Town Northern Suburbs
Replies: 3
Views: 1193

Re: Propshaft repairs - Cape Town Northern Suburbs

Propshaft and balancing centre in Stikland, they just did my SFA's propshaft, cost around R1900 for a full refurbishment.


Sent from my iPhone using Tapatalk
by Moonunit
Sun May 25, 2014 7:05 pm
Forum: Open Discussion
Topic: Rifle hunt - Howa or.....
Replies: 38
Views: 4520

Re: Rifle hunt - Howa or.....

Have a look at a Remington 700, very good rifles and one of the most revered actions, at an affordable price. Went through the same debacle with the 308 & 3006. Ended up going for the 3006. Let us know what u decide on. On a side note almost went 300WM until I'd spoken to people who use them, gr...
by Moonunit
Sat May 17, 2014 12:00 pm
Forum: The Workshop
Topic: Steel plate cutting CT
Replies: 3
Views: 754

Steel plate cutting CT

Cool all I need is a sketch(with enough info) and we can draw it up. All done by hand so it's fairly quick for 1 off items.

If anyone else is interested we do exhaust and turbo flanges too, all I need is the gasket or sample. Between 1 and 2 days turnaround time.


Sent from my iPhone using Tapatalk
by Moonunit
Fri May 16, 2014 6:22 pm
Forum: The Workshop
Topic: Steel plate cutting CT
Replies: 3
Views: 754

Re: Steel plate cutting CT

I have an engineering work shop with an optical profile cutter, call me or mail me in the morning http://www.excelsiorflanges.com" onclick="window.open(this.href);return false;


Sent from my iPhone using Tapatalk
by Moonunit
Fri May 16, 2014 6:20 pm
Forum: Camping gear, Trailers and Other Non-electronic Gadgets
Topic: Those plastic wide-angle window lens thingies 4 rear window
Replies: 19
Views: 8483

Re: Those plastic wide-angle window lens thingies 4 rear win

I've used DX before with no problems, the packages took ages to come though, about 6 weeks


Sent from my iPhone using Tapatalk
by Moonunit
Sat May 10, 2014 9:28 am
Forum: The Workshop
Topic: Electrickery - Vigo 4.0 V6 (2005)
Replies: 14
Views: 2541

Electrickery - Vigo 4.0 V6 (2005)

Also reckon immobiliser. Had a similar problem a while ago in my Clio


Sent from my iPhone using Tapatalk
by Moonunit
Tue May 06, 2014 6:57 pm
Forum: Build your own:
Topic: 22R Intake pipe
Replies: 3
Views: 1584

Re: 22R Intake pipe

Thanks for the info mud dog! The silicone bend closest to the carb has quite a bit of movement, will keep an eye on it though


Sent from my iPhone using Tapatalk
by Moonunit
Tue May 06, 2014 9:48 am
Forum: Build your own:
Topic: 22R Intake pipe
Replies: 3
Views: 1584

22R Intake pipe

My standard intake pipe that goes from the filter unit to the carb intake pipe perished. First the flexible section. 4xLux replaced it with a steel pipe and cut the existing bends to suit the pipe. Then the one bend closest to the carb cracked up and I had to do a quick fix with some insulation tape...
by Moonunit
Thu Apr 24, 2014 9:28 am
Forum: Open Discussion
Topic: Venster en deur rubbers - SFA
Replies: 10
Views: 2019

Re: Venster en deur rubbers - SFA

Also keen to know where to get rubbers?


Sent from my iPhone using Tapatalk
by Moonunit
Mon Mar 10, 2014 9:26 am
Forum: Trail Reports
Topic: Welgelegen 4x4 trail - 1st time 4x4
Replies: 6
Views: 6114

Welgelegen 4x4 trail - 1st time 4x4

Decided to try some 4x4'ing with my recently purchased 1998 SFA. Found a place near stellenbosch. Was R100 per vehicle and the owner was very accommodating in letting us use the trail as it was only the one vehicle. Had plenty fun and was surprised how easily the SFA climbed and descended obstacles....
by Moonunit
Sat Mar 08, 2014 10:40 am
Forum: The Workshop
Topic: Mechanic in Cape Town
Replies: 9
Views: 2006

Re: Mechanic in Cape Town

Get hold of Hoppy and Francois. They will sort u out first time!


Sent from my iPhone using Tapatalk
by Moonunit
Thu Mar 06, 2014 1:50 pm
Forum: The Workshop
Topic: Dyno Charts
Replies: 249
Views: 115303

Re: Dyno Charts

Dyno'ed my 1998 SFA 22R, made some decent figures :) :tease:



Just kidding, it is my other toy, a 6.0L Lumina. Just thought I would post for interests sake.
by Moonunit
Wed Feb 12, 2014 10:09 am
Forum: Web Related Discussions and Suggestions
Topic: You've heard about Bitcoin
Replies: 7
Views: 4529

Re: You've heard about Bitcoin

I believe the crash had something to do with the Russians being banned and google also looking at their own crypto currency. Lots of people have moved from bit to lite and doge coins as they are easier to mine. Been thinking of getting involved but capital outlay and electricity costs are a bit of a...
by Moonunit
Sat Feb 01, 2014 10:47 am
Forum: Open Discussion
Topic: Tell Us How You Got to Know About This Great Hilux Forum
Replies: 157
Views: 81208

Re: Tell Us How You Got to Know About This Great Hilux Forum

Stumbled across it while searching for an SFA to buy. My googlefu was strong when I found this forum. Awesome community and resource for info!


Sent from my iPhone using Tapatalk
by Moonunit
Fri Jan 31, 2014 9:57 am
Forum: Know your fellow members
Topic: What was your first ever vehicle, and who bought it?
Replies: 134
Views: 29042

Re: What was your first ever vehicle, and who bought it?

1983 Nissan Exa Turbo in white. Thing was a little beast for my first car, put out 85KW. Later had a SAC free flow and tune done, pushed around 95KW. Car was given to me by my aunt.
by Moonunit
Fri Jan 31, 2014 9:48 am
Forum: Members' Vehicles
Topic: My 2011
Replies: 5
Views: 4009

Re: My 2011

Very Nice, Looking good! :thumbup: :thumbup:
by Moonunit
Tue Jan 28, 2014 4:07 pm
Forum: The Workshop
Topic: Minimum battery voltage required to start a 22R
Replies: 9
Views: 3843

Re: Minimum battery voltage required to start a 22R

Interesting info. Never knew this about deep cycles. Was always under the impression they are better, a lot of people I know use them for SQ grade car audio systems(Single battery).
by Moonunit
Tue Jan 28, 2014 12:01 pm
Forum: The Workshop
Topic: Minimum battery voltage required to start a 22R
Replies: 9
Views: 3843

Re: Minimum battery voltage required to start a 22R

AFAIK it comes down to cold cranking amps, the higher the better. Also a deep cycle will swing the motor at just below 12 volts(Mine will swing my Lumina's engine which needs quite a bit of juice to turn over). I am planning on upgrading my battery in my lux fairly soon, with a Varta deep cycle batt...
by Moonunit
Tue Jan 28, 2014 8:16 am
Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
Topic: Octane booster
Replies: 4
Views: 1284

Re: Octane booster

Thanks for the feedback guys. Octane booster, ups the ron from 95 to 101(depending on brand), this makes the fuel more stable(doesn't explode so easy) and helps prevent detonation. Hence you are able to advance the timing and extra more power from the engine. I was only concerned about the running o...
by Moonunit
Sun Jan 26, 2014 12:15 pm
Forum: 1979 to early 1998 Hilux (Gen 3&4 aka SFA 4x4)
Topic: Octane booster
Replies: 4
Views: 1284

Octane booster

Hi All, been lurking on the forums plenty, time to post :cool: Recently acquired a 98 SFA Ltd ed with a 22R motor. I sometimes run octane booster in my Lumina which does make a difference, takes about a tank for the ECU to adjust. Now I was wondering would octane booster work for the 22R motor even ...

Go to advanced search