Brake fluid level sensor. Can not see one on my brake fluid reservoir. Any suggestions.

Discussion form for the Toyota Prado
Post Reply
Posts: 1
Joined: Mon Jul 06, 2020 3:27 pm
Town: St Francis Bay
Vehicle: 2005Prado
Real Name: Chris

User avatar
Mud Dog
Posts: 29882
Joined: Tue Apr 29, 2008 2:18 am
Town: East London
Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
Real Name: Andy
Club VHF Licence: HC103

The sensor, if it has one (not all vehicles have), is normally fitted in the cap of the brake fluid reservoir. In such case there will be wires to the cap. If there are no wires, then the vehicle is not fitted with a sensor.
When your road comes to an end ...... you need a HILUX!.


Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Post Reply

Return to “Toyota Prado 4x4 Forum”