Rock Sliders

Discuss anything here as long as it is clean. Having a hard time with your Skoonma, tell us about it here, or discuss the Rugby. Whatever you feel like talking about.
Post Reply
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Wed Aug 22, 2012 10:07 am

What do you think of these?

http://www.sleeoffroad.com/products/tundra_sliders.htm" onclick="window.open(this.href);return false;
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
Rieks
Low Range 4WD
Low Range 4WD
Posts: 137
Joined: Wed Sep 16, 2009 10:11 am
Town: Outjo
Vehicle: 3.0 D4D
Real Name: Rian

Wed Aug 22, 2012 10:45 am

George - that looks very interesting - just wonder if they strong enough for our conditions.

But I do like the way it looks!!
User avatar
Traveler
Monster Truck
Monster Truck
Posts: 5394
Joined: Fri Feb 26, 2010 7:11 am
Town: Springs
Vehicle: Pathfinder 2.5 LE AT
Real Name: Heinrich
Club VHF Licence: X81
Location: Gauteng
Contact:

Wed Aug 22, 2012 11:45 am

I believe they will be strong enough.
Rocks in Africa and rocks in America are all hard. And if it can carry a Tundra, they will giggle at a Hilux. What gives this design strength in my mind is the fact that it attaches the full length of the chassis, and not just in 3 or 4 positions.
Image
Image

Know what you don't know.
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Wed Aug 22, 2012 12:06 pm

Yes but they used close to 5mm steel. The weight is what worries me..........
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
Traveler
Monster Truck
Monster Truck
Posts: 5394
Joined: Fri Feb 26, 2010 7:11 am
Town: Springs
Vehicle: Pathfinder 2.5 LE AT
Real Name: Heinrich
Club VHF Licence: X81
Location: Gauteng
Contact:

Wed Aug 22, 2012 12:31 pm

GeorgeJvR wrote:Yes but they used close to 5mm steel. The weight is what worries me..........
Unfortunately strong rock sliders will tend to be heavy. It is a trade off.
Image
Image

Know what you don't know.
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Wed Aug 22, 2012 12:35 pm

Yes but will it be the same as say ONCA or the other brands,
or would you say heavier?
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
Traveler
Monster Truck
Monster Truck
Posts: 5394
Joined: Fri Feb 26, 2010 7:11 am
Town: Springs
Vehicle: Pathfinder 2.5 LE AT
Real Name: Heinrich
Club VHF Licence: X81
Location: Gauteng
Contact:

Wed Aug 22, 2012 12:36 pm

I think this design will be heavier.

Looking for sliders George?
Image
Image

Know what you don't know.
User avatar
MOFASA
Monster Truck
Monster Truck
Posts: 3127
Joined: Sun Mar 04, 2012 7:27 pm
Town: Boksburg
Vehicle: 1998 JEEP XJ 4.0............ 4 inch lift.... more mods to follow............ Old vehicle was MOFASA
Real Name: Johno
Club VHF Licence: X119
Location: Boksburg

Wed Aug 22, 2012 12:55 pm

What does the average set of rock sliders weigh????
Live Life in the FAST lane....
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP :yahoo: ..... You wouldn't understand....
ImageImageImage[rimg=206x128]
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Wed Aug 22, 2012 1:27 pm

Traveler wrote:I think this design will be heavier.

Looking for sliders George?
:thumbup:
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Wed Aug 22, 2012 1:29 pm

MOFASA wrote:What does the average set of rock sliders weigh????
No idea.
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
Royco
LR4WD, Lockers, Crawler Gears
LR4WD, Lockers, Crawler Gears
Posts: 1169
Joined: Sun Apr 12, 2009 7:50 pm
Town: Stellenbosch
Vehicle: '09 D4D 3.0 Raider 4x4 D/Cab
Real Name: Roy
Club VHF Licence: X88

Wed Aug 22, 2012 1:45 pm

My Stofpad sliders are about 26kg each.
Heavy, but solid!! :thumbup: :thumbup:
Image Image Image Image
User avatar
MOFASA
Monster Truck
Monster Truck
Posts: 3127
Joined: Sun Mar 04, 2012 7:27 pm
Town: Boksburg
Vehicle: 1998 JEEP XJ 4.0............ 4 inch lift.... more mods to follow............ Old vehicle was MOFASA
Real Name: Johno
Club VHF Licence: X119
Location: Boksburg

Wed Aug 22, 2012 1:55 pm

What about something like this

Made from 70mm pipe with a 3mm wall, 10mm mounting brackets.
Should be around the 25kgs per slider for the DC.....

Maybe to heavy :?: :?: :think: :think:

Please guys this is just a design i thought of and exact measurements were NOT used...... :think:
Attachments
Rock Sliders.JPG
Live Life in the FAST lane....
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP :yahoo: ..... You wouldn't understand....
ImageImageImage[rimg=206x128]
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Wed Aug 22, 2012 2:54 pm

Thanks Roy
Saw some Fortuner Sliders from Stofpad.... Pitty they don't fit the IFS.

SWAMBO wants steppies as well "3year old....Ek wil self ......."

I'l remove those tupperware tonight and see.
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
Royco
LR4WD, Lockers, Crawler Gears
LR4WD, Lockers, Crawler Gears
Posts: 1169
Joined: Sun Apr 12, 2009 7:50 pm
Town: Stellenbosch
Vehicle: '09 D4D 3.0 Raider 4x4 D/Cab
Real Name: Roy
Club VHF Licence: X88

Wed Aug 22, 2012 3:11 pm

I know what you mean.... :roll:
When I removed the running boards and replaced with the Stofpad sliders, I got a lot of moans!
The running boards were a lot lower, and work well as steps (for 5yr olds!) - probably why they get bent!

Good luck with your search! :thumbup:
Image Image Image Image
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Wed Aug 22, 2012 3:17 pm

Seeing that i can't find something for the IFS. I'll be doing a DIY project soon

I'm thinking 50mm x 3mm square tubing + 50 mm x 3 mm round tubing + 50 x 8mm flat bar.....
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
WayneSchalk
Monster Truck
Monster Truck
Posts: 2194
Joined: Mon Feb 09, 2009 10:22 am
Town: Krugersdorp
Vehicle: 2014 Toyota Fortuner 3.0 D4D 4X4 Auto
Real Name: Wayne
Club VHF Licence: X117

Wed Aug 22, 2012 3:44 pm

Im over due to build mine, found this pic on the forum.


And it is what I WANT!!!!
Attachments
ImageUploadedByTapatalk HD1345643050.823074.jpg
ImageUploadedByTapatalk HD1345643050.823074.jpg (49.58 KiB) Viewed 1723 times
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Wed Aug 22, 2012 3:47 pm

:thumbup:
Wayne
More or less what i have in mind, just ad a stepping plate and replace the round tube closest to the body with square tube
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
Traveler
Monster Truck
Monster Truck
Posts: 5394
Joined: Fri Feb 26, 2010 7:11 am
Town: Springs
Vehicle: Pathfinder 2.5 LE AT
Real Name: Heinrich
Club VHF Licence: X81
Location: Gauteng
Contact:

Wed Aug 22, 2012 4:04 pm

Contact Dolf at Gerbers 4WD, he will build as you require.
Image
Image

Know what you don't know.
User avatar
MOFASA
Monster Truck
Monster Truck
Posts: 3127
Joined: Sun Mar 04, 2012 7:27 pm
Town: Boksburg
Vehicle: 1998 JEEP XJ 4.0............ 4 inch lift.... more mods to follow............ Old vehicle was MOFASA
Real Name: Johno
Club VHF Licence: X119
Location: Boksburg

Wed Aug 22, 2012 4:37 pm

Traveler wrote:Contact Dolf at Gerbers 4WD, he will build as you require.
Heard loads about them...... Guy i work with knows him personaly.....
Still need to go check them out.... :thumbup:
Live Life in the FAST lane....
Forget the past, Embrace the FUTURE!!!!
To 4x4 or not to 4x4 thats the question....
IT'S A JEEP :yahoo: ..... You wouldn't understand....
ImageImageImage[rimg=206x128]
User avatar
WayneSchalk
Monster Truck
Monster Truck
Posts: 2194
Joined: Mon Feb 09, 2009 10:22 am
Town: Krugersdorp
Vehicle: 2014 Toyota Fortuner 3.0 D4D 4X4 Auto
Real Name: Wayne
Club VHF Licence: X117

Wed Aug 22, 2012 4:49 pm

GeorgeJvR wrote::thumbup:
Wayne
More or less what i have in mind, just ad a stepping plate and replace the round tube closest to the body with square tube
Jip, the one closest to the body will be square,

And this is a pic of how Pieter did his Brackets, I will do something similar.

SE Steel quoted R840 for

1 x 6m round tube 3mm
1 x 6m Square tube 3mm

And scorpion exhaust in Krugersdorp will do the bends for R100 or so :thumbup:
Im very tempted to do mine this weekend if I find the time
Attachments
slider2.jpg
slider2.jpg (24.4 KiB) Viewed 1703 times
User avatar
pietpetoors
Moderator
Moderator
Posts: 10368
Joined: Thu May 17, 2007 9:12 pm
Town: Langebaan
Vehicle: 2.7 Hilux 4x4 DC
Real Name: Pieter
Club VHF Licence: X27
Contact:

Wed Aug 22, 2012 6:11 pm

George wil jy jou rocksliders so maak?
Image
Only Dead Fish Go With The Flow!
Image
1999 Hilux 2.7i 4x4 Raider DC. Rear diff-lock, Red Peppor Bull Bar and rock sliders, 31" Cooper ST, Snorkel, Alu-Canopy, VHF Kirisun radio, West Coast Rust, Mikem Rear Suspension, Ball Joint Spacers in front, 25watt LED Spots
User avatar
Traveler
Monster Truck
Monster Truck
Posts: 5394
Joined: Fri Feb 26, 2010 7:11 am
Town: Springs
Vehicle: Pathfinder 2.5 LE AT
Real Name: Heinrich
Club VHF Licence: X81
Location: Gauteng
Contact:

Wed Aug 22, 2012 9:45 pm

Pieter, daai lyk op 'n druppel soos Stofpad se rocksliders??



Johno, you will NEVER be sorry for a visit to Gerbers. Dolf is really approachable, and he will not say no for work.
Image
Image

Know what you don't know.
OOOOMS
Top Web Wheeler
Top Web Wheeler
Posts: 19884
Joined: Tue Jul 16, 2013 7:09 am

Wed Aug 22, 2012 9:56 pm

GeorgeJvR wrote:Seeing that i can't find something for the IFS. I'll be doing a DIY project soon

I'm thinking 50mm x 3mm square tubing + 50 mm x 3 mm round tubing + 50 x 8mm flat bar.....
Maak net seker daar is x3 mounting punte verkieslik aan die chassis :wink2:
User avatar
Traveler
Monster Truck
Monster Truck
Posts: 5394
Joined: Fri Feb 26, 2010 7:11 am
Town: Springs
Vehicle: Pathfinder 2.5 LE AT
Real Name: Heinrich
Club VHF Licence: X81
Location: Gauteng
Contact:

Wed Aug 22, 2012 9:59 pm

Stem saam, minimum 3.
Ek het gevind die 2 brackets van Stofpad is BAIE sterk, maar die materiaal van die rockslider self kan nie die gewig dra nie. 3 brackets sou beter gewees het.
Image
Image

Know what you don't know.
OOOOMS
Top Web Wheeler
Top Web Wheeler
Posts: 19884
Joined: Tue Jul 16, 2013 7:09 am

Wed Aug 22, 2012 10:08 pm

Traveler wrote:Stem saam, minimum 3.
Ek het gevind die 2 brackets van Stofpad is BAIE sterk, maar die materiaal van die rockslider self kan nie die gewig dra nie. 3 brackets sou beter gewees het.
Ja tot ONCA se rock sliders op mamma se Tuna het x3 chassie brackets :wink2:
User avatar
Traveler
Monster Truck
Monster Truck
Posts: 5394
Joined: Fri Feb 26, 2010 7:11 am
Town: Springs
Vehicle: Pathfinder 2.5 LE AT
Real Name: Heinrich
Club VHF Licence: X81
Location: Gauteng
Contact:

Wed Aug 22, 2012 10:18 pm

OOOOMS wrote:
Traveler wrote:Stem saam, minimum 3.
Ek het gevind die 2 brackets van Stofpad is BAIE sterk, maar die materiaal van die rockslider self kan nie die gewig dra nie. 3 brackets sou beter gewees het.
Ja tot ONCA se rock sliders op mamma se Tuna het x3 chassie brackets :wink2:
En jy het gesien by Chloorkop, Rhinopark en Heidelberg hoe het my rocksliders op die bracket gebuig dat ek deur die venster moes klim om hulle terug te buig want die deur kon nie oop nie.
Image
Image

Know what you don't know.
OOOOMS
Top Web Wheeler
Top Web Wheeler
Posts: 19884
Joined: Tue Jul 16, 2013 7:09 am

Wed Aug 22, 2012 10:32 pm

Traveler wrote:
OOOOMS wrote:
Traveler wrote:Stem saam, minimum 3.
Ek het gevind die 2 brackets van Stofpad is BAIE sterk, maar die materiaal van die rockslider self kan nie die gewig dra nie. 3 brackets sou beter gewees het.
Ja tot ONCA se rock sliders op mamma se Tuna het x3 chassie brackets :wink2:
En jy het gesien by Chloorkop, Rhinopark en Heidelberg hoe het my rocksliders op die bracket gebuig dat ek deur die venster moes klim om hulle terug te buig want die deur kon nie oop nie.
Jaaaaaa.....maar ek dink dis omdat jy bietjie oorgewig is....dat hulle gebuig het :dance1: :dance1: :dance1:
User avatar
Traveler
Monster Truck
Monster Truck
Posts: 5394
Joined: Fri Feb 26, 2010 7:11 am
Town: Springs
Vehicle: Pathfinder 2.5 LE AT
Real Name: Heinrich
Club VHF Licence: X81
Location: Gauteng
Contact:

Thu Aug 23, 2012 7:36 am

OOOOMS wrote:Jaaaaaa.....maar ek dink dis omdat jy bietjie oorgewig is....dat hulle gebuig het :dance1: :dance1: :dance1:
Hoe bedoel meneer dan nou? :dontknow: :dontknow: :dontknow: :dontknow: :dontknow: :dontknow:


Meneer het dan die rocksliders vir my teruggebuig...... :whip:
Image
Image

Know what you don't know.
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Thu Aug 23, 2012 7:41 am

Pieter nie heel te mal nie. Ek het 'n skets gedoen maar kan hom on gelukkig nie scan nie...

My grootste probleem is die Mounting aan die drywers kant agter (brandstof tank, Brake lines...)
Het enige iemand fotos van wat daar gedoen kan word?
Voor wil ek die X-member se 4 boute aan elke kant gebruik.


Ek sien die Chassis is +/- 4mm dik
Wat van as ek 4 gate onder en 4 gate voor boor (gesien van die kant van die voertuig) en dit dan 'tap' om 'n 4mm plaat 90grade gebuig +/- 1M lank
teen die chassis vas te bout? dan kan ek maklik 3/4 mounting maak
sof1245-450-5.jpg
(258.75 KiB) Downloaded 244 times
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
pietpetoors
Moderator
Moderator
Posts: 10368
Joined: Thu May 17, 2007 9:12 pm
Town: Langebaan
Vehicle: 2.7 Hilux 4x4 DC
Real Name: Pieter
Club VHF Licence: X27
Contact:

Thu Aug 23, 2012 9:07 am

Heinrich, Ja daai is stofpad sin.
Mark, stem saam op Vigo moet jy 3 brackets he want die Vigo se sliders is langer en die bakkie is swaarder, maar op ons modelle IFS is 2 brackets genoeg.

George, ek sal prentjie vat vandag, maar wat jy doen is maak bracket wat U-vorm is wat van onder oor die chassis raam skuif. Aan die een kant sweis jy 'n moer op die bopunt vas en aan die anderkant maak jy net 'n gat regoor die moer.
Dan skuif jy die U oor die chassis, tussen die chassis en pyp deur en as hy daar is draai jy 'n bout aan die bokant in wat hom verhoed om af te skuif en wat hom vasklamp.
Hoop dit maak sin.
Wat van as ek 4 gate onder en 4 gate voor boor
Persoonlik hou ek nie van gate boor in jou chassis nie, is ook baie makliker om 'n bracket te maak wat om die chassis gaan.
Only Dead Fish Go With The Flow!
Image
1999 Hilux 2.7i 4x4 Raider DC. Rear diff-lock, Red Peppor Bull Bar and rock sliders, 31" Cooper ST, Snorkel, Alu-Canopy, VHF Kirisun radio, West Coast Rust, Mikem Rear Suspension, Ball Joint Spacers in front, 25watt LED Spots
Uys
Low Range 4WD
Low Range 4WD
Posts: 214
Joined: Tue Mar 03, 2009 11:42 am
Town: Pretoria
Vehicle: 2008 D4-d Fortuner
Real Name: Uys

Thu Aug 23, 2012 9:57 am

Traveler wrote:Ek het gevind die 2 brackets van Stofpad is BAIE sterk, maar die materiaal van die rockslider self kan nie die gewig dra nie. 3 brackets sou beter gewees het.


Heinrich.

Het jy enige fotos hiervan? Ek sal dit baie graag wil sien , die die eerste keer wat ek dit hoor.

Uys
_____________________________________
Uys van Rooyen
uys@stofpad4x4.co.za
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Thu Aug 23, 2012 10:19 am

230820121031.jpg
230820121031.jpg (38.46 KiB) Viewed 1669 times
230820121030.jpg
230820121030.jpg (36.74 KiB) Viewed 1668 times
230820121032.jpg
230820121032.jpg (39.49 KiB) Viewed 1667 times


Die voor U mountings / X member en die Linker agterste U mounting is nie die probleem nie wat my pla is die
Drywer kant se agterste U mounting.
Hoe kom die tussen die Tank en Chassis deur?
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Thu Aug 23, 2012 10:58 am

Here is the design i have in mind...
This is with no specific measurements and free hand
Untitled-1.jpg
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
OOOOMS
Top Web Wheeler
Top Web Wheeler
Posts: 19884
Joined: Tue Jul 16, 2013 7:09 am

Thu Aug 23, 2012 11:14 am

George, daai is mooi :thumbup:
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Thu Aug 23, 2012 11:43 am

Thanks Mark
Hy kort net die high lift punte.
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
OOOOMS
Top Web Wheeler
Top Web Wheeler
Posts: 19884
Joined: Tue Jul 16, 2013 7:09 am

Thu Aug 23, 2012 11:55 am

GeorgeJvR wrote:Thanks Mark
Hy kort net die high lift punte.
Nie noodwendig nie.....as hy sterk genoeg is kan jy mos die jack daar onder druk anyway. Kaans dat jy dit ooit gaan nodig he is seker of hopelik nooit ;-)
User avatar
Traveler
Monster Truck
Monster Truck
Posts: 5394
Joined: Fri Feb 26, 2010 7:11 am
Town: Springs
Vehicle: Pathfinder 2.5 LE AT
Real Name: Heinrich
Club VHF Licence: X81
Location: Gauteng
Contact:

Thu Aug 23, 2012 12:11 pm

Uys wrote:
Traveler wrote:Ek het gevind die 2 brackets van Stofpad is BAIE sterk, maar die materiaal van die rockslider self kan nie die gewig dra nie. 3 brackets sou beter gewees het.


Heinrich.

Het jy enige fotos hiervan? Ek sal dit baie graag wil sien , die die eerste keer wat ek dit hoor.

Uys
Uys, ek sal moet kyk of ek het. Dit was die wande van die sq tubing wat gebuig het. En as hy eers 1 maal gebuig het, dan hou hy aan buig op presies dieselfde plek.
Image
Image

Know what you don't know.
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Thu Aug 23, 2012 2:12 pm

:frustrated:
Ek kan net 48 x 2mm round tubing kry nie 50 x 3mm soos ek wou nie en die 90deg weld on bends is 48 nie 50 nie
So ek oorweek nou omdie 48 x 2mm te gebruik vir de step deel en 50 x 50 x 3mm vir die slide deel
En dan 60mm x 8mm vir die mountings siende dat niemand 50 x 8mm flat bar het nie

:frustrated: :frustrated:
Enige raad?
Last edited by GeorgeJvR on Thu Aug 23, 2012 3:13 pm, edited 1 time in total.
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Thu Aug 23, 2012 2:33 pm

Sorry, met 3x mountings
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
NardusJVR
Low Range 4WD
Low Range 4WD
Posts: 177
Joined: Sun Apr 04, 2010 7:23 am
Town: Louis Trichardt
Vehicle: hilux 2.8TD
Real Name: Nardus
Location: Louis Trichardt
Contact:

Thu Aug 23, 2012 3:49 pm

Broer, ons sal die een oor n paar koues moet bespreek die naweek!
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Thu Aug 23, 2012 3:55 pm

Bly om te sien jy offer om te help........... :yahoo: :celebrate: :D:
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Thu Aug 23, 2012 3:59 pm

4x 90deg weld on bends 48mm R53
6M 60 x 8 flatbar -
6M 50 x 50 x 3 square tubing -
10 cutting discs -
1 grinding disc - R754

I had to order the 48 x 3mm round tubing.
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Fri Aug 24, 2012 8:39 am

George, ek sal prentjie vat vandag, maar wat jy doen is maak bracket wat U-vorm is wat van onder oor die chassis raam skuif.

Pieter kon jy al daai kiekie vat? :beg:
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
pietpetoors
Moderator
Moderator
Posts: 10368
Joined: Thu May 17, 2007 9:12 pm
Town: Langebaan
Vehicle: 2.7 Hilux 4x4 DC
Real Name: Pieter
Club VHF Licence: X27
Contact:

Fri Aug 24, 2012 9:06 am

Eerstes is die agterste bracket en die ander die voorste bracket

Sien die agter bracket waar nut aan bracket gesweis is, is aan tenk se kant die nut. Die ander brackets is die flatbar ent eenvoudig langer as die chassis hoogte met bout deur
rock-sliders (5).JPG
Agter 2
rock-sliders (5).JPG (76.45 KiB) Viewed 1615 times
rock-sliders (7).JPG
Agter 1
rock-sliders (7).JPG (64.48 KiB) Viewed 1615 times
rock-sliders (1).JPG
Voor 2
rock-sliders (1).JPG (63.88 KiB) Viewed 1615 times
rock-sliders (8).JPG
Voor 1
rock-sliders (8).JPG (85.36 KiB) Viewed 1615 times
Only Dead Fish Go With The Flow!
Image
1999 Hilux 2.7i 4x4 Raider DC. Rear diff-lock, Red Peppor Bull Bar and rock sliders, 31" Cooper ST, Snorkel, Alu-Canopy, VHF Kirisun radio, West Coast Rust, Mikem Rear Suspension, Ball Joint Spacers in front, 25watt LED Spots
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Fri Aug 24, 2012 10:10 am

Dankie Pieter, met ander woorde hy clear die rem pypies jy hoef dit nie te suif nie?
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
pietpetoors
Moderator
Moderator
Posts: 10368
Joined: Thu May 17, 2007 9:12 pm
Town: Langebaan
Vehicle: 2.7 Hilux 4x4 DC
Real Name: Pieter
Club VHF Licence: X27
Contact:

Fri Aug 24, 2012 10:18 am

Ja hy gaan net mooi agter verby, as jou flatbar dun genoeg is natuurlik, kan nie onthou of daai 5 of 6mm is nie, maar is beslis nie 8mm
nie
Only Dead Fish Go With The Flow!
Image
1999 Hilux 2.7i 4x4 Raider DC. Rear diff-lock, Red Peppor Bull Bar and rock sliders, 31" Cooper ST, Snorkel, Alu-Canopy, VHF Kirisun radio, West Coast Rust, Mikem Rear Suspension, Ball Joint Spacers in front, 25watt LED Spots
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Fri Aug 24, 2012 10:26 am

Dankie ek gaan dadelik gaan kyk wat ek moet kry.
Dalk gou vir die ingeneurs vra om die U's te buig uit 60 x 5mm
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
User avatar
GeorgeJvR
Monster Truck
Monster Truck
Posts: 3264
Joined: Thu Jul 16, 2009 2:55 pm
Town: Louis Trichardt
Vehicle: 2008 Prado 4.0 V6, 1989 SFA S/C 2.2
Real Name: George

Wed Oct 24, 2012 12:50 pm

viewtopic.php?f=41&t=27922" onclick="window.open(this.href);return false;
To Buy and sell a vehicle is my hobby
Make a deal that no one else thought possible is my aim

Kom wat wil ek bly 'n Bul!
Post Reply

Return to “Open Discussion”