Hilux Malfunction in Limp Mode drive with black smoke

Discuss anything here as long as it is clean. Having a hard time with your Skoonma, tell us about it here, or discuss the Rugby. Whatever you feel like talking about.
Post Reply
High Range 2WD
High Range 2WD
Posts: 10
Joined: Wed Mar 14, 2018 2:57 pm
Town: Anatananarivo
Vehicle: 2007 Hilux 3.0D4D AT
Real Name: Gorde

Wed Mar 28, 2018 12:53 pm

On March 28th 2018-03-28

My Car : Fortuner /Hilux 2007 3.0D4D AT
Engine 1KD-FTV
KM 190000

Hilux Malfunction in Limp Mode drive

My Hilux going several times in Limp Mode Drive and as I was far away from any garage and Towing truck I was oblige to drive few hundred Km in Limp Mode at 1500/1800 rpm. After that rpm is now lower than 1000rpm and black smoke appear at exhaust .

After Come back and cancel error P1251/34by repairing Turbo driver the engine run again Normally over 2000rpm.

Now if I disconnect Turbo driver of course Error P1251/34 going on again at rpm 1000 maximum .

Somebody could give me à solution to recover rpm2000 in Limp Mode ?

Thanks in advance

Post Reply

Return to “Open Discussion”