Page 1 of 1
Catch Can - Where to Find?
Posted: Wed May 23, 2018 11:46 pm
by yotaman
Grateful if someone can direct me to where I would be able to get my hands on a good quality Catch Can. I'm committed to fit one to my D4D's system.
Re: Catch Can - Where to Find?
Posted: Thu May 24, 2018 8:33 am
by Choppies
Hi Shane
Just spoke to Mr Turbo and they are waiting for stock to arrive in the next 6 weeks.
Here is the link.
http://www.mrturbo.co.za/index.php?page ... 1&Itemid=1
Re: Catch Can - Where to Find?
Posted: Thu May 24, 2018 8:43 am
by yotaman
Many thanks Choppies!
Re: Catch Can - Where to Find?
Posted: Thu May 24, 2018 7:16 pm
by ash007
Does it have baffles or medium inside to promote condensation of the oil vapours to take place? The sight tube I pressume wont work for very long?
Sent from my SM-J500F using Tapatalk
Re: Catch Can - Where to Find?
Posted: Fri May 25, 2018 6:55 pm
by bullit
I have installed one on my D4D.
It is similar to the one from Mr Turbo. The only issue was it had an inlet and out let right next to one another.
I extended the inlet with some copper tube and then put a bunch or steel scourer into the camber.
Seems to be working well
Re: Catch Can - Where to Find?
Posted: Fri May 25, 2018 9:57 pm
by yotaman
bullit wrote: ↑Fri May 25, 2018 6:55 pm
I have installed one on my D4D.
It is similar to the one from Mr Turbo. The only issue was it had an inlet and out let right next to one another.
I extended the inlet with some copper tube and then put a bunch or steel scourer into the camber.
Seems to be working well
Hi Ryan, kindly tell me where did you buy it and when?
thanksalot
Re: Catch Can - Where to Find?
Posted: Sat May 26, 2018 10:29 pm
by bullit
It’s a D1 spec bought from auto style about two months ago.
If you do get one make sure the inlet/outlet is 15mm and not 9mm. I made the mistake and had to modify the ports
Re: Catch Can - Where to Find?
Posted: Sun May 27, 2018 8:09 am
by yotaman
Gotcha, thanks for the advice Ryan