Manufacturing your own type ARB front bumper
- SYRON CONVERSIONS
- LR4WD, Lockers, Crawler Gears
- Posts: 1494
- Joined: Fri May 18, 2007 8:51 pm
- Town: Tamboekieland
- Vehicle: SFA HILUX
- Real Name: SIMON
- Location: Tamboekieland
Re: Manufacturing your own type ARB front bumper
This morning on my way to work, I passed this small convoy of Hilux 4x4 vehicle's, they laughed at me when I passed, because I was driving in FUGLY my old Nissan 4x4 bakkie, anyway what caught my attention was the one vehicle had a nice looking front bumper and winch incorperated, thus I stopped them and took some photo's, these guys had just been on a hunting safari down in Cradock, they were on their way home back to Natal, looked like farmers.
I am not sure what make front bumper this is, but I am sure it will give they guys with new Hilux's to consider.
One thing that I must add is these front bumpers that have been chromed are no good, you will get a reflection from the shiny chrome and this can blind you while driving
I am not sure what make front bumper this is, but I am sure it will give they guys with new Hilux's to consider.
One thing that I must add is these front bumpers that have been chromed are no good, you will get a reflection from the shiny chrome and this can blind you while driving
1992 Slightly Modified Hilux, 2008 VW Caddy panelvan work, 2010 Isuzu 2.5 td bakkie for work, a pair of big 'balloons' as well hanging at the rear of my Hilux
simoan
simoan
- SYRON CONVERSIONS
- LR4WD, Lockers, Crawler Gears
- Posts: 1494
- Joined: Fri May 18, 2007 8:51 pm
- Town: Tamboekieland
- Vehicle: SFA HILUX
- Real Name: SIMON
- Location: Tamboekieland
Re: Manufacturing your own type ARB front bumper
My friend Corrie has just completed the manufacture of his own front bumper for his vehicle, what a wonderful job it turned out to be.
Excellent, see what you can do if you try
Excellent, see what you can do if you try
1992 Slightly Modified Hilux, 2008 VW Caddy panelvan work, 2010 Isuzu 2.5 td bakkie for work, a pair of big 'balloons' as well hanging at the rear of my Hilux
simoan
simoan
- Family_Dog
- Moderator
- Posts: 12697
- Joined: Tue May 22, 2007 10:09 am
- Town: Klerksdorp
- Vehicle: Hilux DC SFA, Hilux 2.7 DC, Hilux 2.7 SC, Prado 95 VX
- Real Name: Eric
- Club VHF Licence: HC101
- Location: Klerksdorp, NW
- Contact:
Re: Manufacturing your own type ARB front bumper
Very nice, Simon!
-F_D
-F_D
White Fang: 1999 2.7i DC Raider 4x4
Bull Dog: 1987 4Y-EFI 2.2 DC 4x4
Pra Dog: 1998 Prado VX 3.4
Hound Dog: 2000 2.7i SC 4x4
One Staffie, One Jack Russell, One Ring Neck Screecher, 17 Fish of questionable heritage
- Cookie Monster
- LR 4WD Full Lockers
- Posts: 968
- Joined: Tue Jun 26, 2007 7:02 am
- Town: Port Elizabeth
- Vehicle: 2006 Hilux DC V6 Auto 4x4 Oldman Emu suspension
- Real Name: Justin
- Location: Eastern Cape
- Contact:
Re: Manufacturing your own type ARB front bumper
Looks good Simon :D
2006 Hilux DC 4x4 4.0 V6 Old Man Emu suspension, Long Range Fuel Tank and a LA Sport Sump Guard, Natko railings with spade and high lift brackets, LA Sport high lift jack mounts, Powder coated Hilux Nudge Bar, Hella LED light bar, LED Work Light
- george
- Monster Truck
- Posts: 6565
- Joined: Wed May 23, 2007 11:16 am
- Town: Velddrif
- Vehicle: Triton 3.5l V6
- Real Name: George
- Club VHF Licence: HC107
- Location: Velddrif
- Contact:
Re: Manufacturing your own type ARB front bumper
Hi Simon.looks good.What model is this?
"The World is a book, and those who do not travel read only a page.-Saint Augustine"
- SYRON CONVERSIONS
- LR4WD, Lockers, Crawler Gears
- Posts: 1494
- Joined: Fri May 18, 2007 8:51 pm
- Town: Tamboekieland
- Vehicle: SFA HILUX
- Real Name: SIMON
- Location: Tamboekieland
Re: Manufacturing your own type ARB front bumper
Hello George, it is known as The Surf, it has a diesel engine fitted, looks like a nice vehicle, with the independant front suspension it does keep up with us guys in our Hilux's with the solid front axle, it has a locker in the rear, Corrie who ownes it, he told me that he had paid R25 000. for it, but did some work on it, imported some stuff as well for it, Corrie has his own panel beater spray painting business, one hell of a nice guy and friend. :) We always rip him off and tell him that if he does damage his 4x4, at least he does have somebody to repair it.
1992 Slightly Modified Hilux, 2008 VW Caddy panelvan work, 2010 Isuzu 2.5 td bakkie for work, a pair of big 'balloons' as well hanging at the rear of my Hilux
simoan
simoan
-
- Monster Truck
- Posts: 5269
- Joined: Sun Aug 19, 2007 10:43 pm
- Town: Pretoria
- Vehicle: '02 'Lux KZ
- Real Name: Thabo
- Club VHF Licence: x223
- Location: Garsfontein
- Contact:
Re: Manufacturing your own type ARB front bumper
Yes,
All these bumpers looks great!
My 'Lux has a Nudge-M on and I am quite happy, just one little thing that I would like to have had: The bumper must be wider than the vehicle! Reason being, we share our roads with those not so proud of their vehicle and would not mind another bend/scratch on theirs. I recently had the firsthand opportunity to witness how this really works and my bumper protected me quite well, but it did pick up some scratches on the wheel flare.... :x If it has been 30-50mm wider....
All these bumpers looks great!
My 'Lux has a Nudge-M on and I am quite happy, just one little thing that I would like to have had: The bumper must be wider than the vehicle! Reason being, we share our roads with those not so proud of their vehicle and would not mind another bend/scratch on theirs. I recently had the firsthand opportunity to witness how this really works and my bumper protected me quite well, but it did pick up some scratches on the wheel flare.... :x If it has been 30-50mm wider....
'02 KZ 'Lux. Cooled. Chipped. Onca'd. Cherished!
If you are a diesel fan, raise your hand.
If you aren't raising your hand, raise your standards!
A 4x4 is merely a machine that enables you to get stuck further away from civilization.
If you are a diesel fan, raise your hand.
If you aren't raising your hand, raise your standards!
A 4x4 is merely a machine that enables you to get stuck further away from civilization.
- SYRON CONVERSIONS
- LR4WD, Lockers, Crawler Gears
- Posts: 1494
- Joined: Fri May 18, 2007 8:51 pm
- Town: Tamboekieland
- Vehicle: SFA HILUX
- Real Name: SIMON
- Location: Tamboekieland
Re: Manufacturing your own type ARB front bumper
Yes you are correct, these various bumpers that various people fit to their Hilux's make the vehicle look tough, mean and also serve as a place that is strong to support a winch, some people connect or weld recovery points to these bumpers, which can work in some applicatons, however it depends on how the bumper has been attached to the vehicle, have extra supports been used.
But you must remember, these recovery points should be attached to the chassis of a vehicle, but once again, depending on the model Hilux, this might be difficult at times.
Also like I said before, with the newer type model Hilux 4x4 vehices, these bumpers can effect the operation of the vehiles air bags, My preference is that I would rather have a big study bumper that I know will do the job than an airbag that might not work, I have read that these airbags also have their negative aspects to remember.
But you must remember, these recovery points should be attached to the chassis of a vehicle, but once again, depending on the model Hilux, this might be difficult at times.
Also like I said before, with the newer type model Hilux 4x4 vehices, these bumpers can effect the operation of the vehiles air bags, My preference is that I would rather have a big study bumper that I know will do the job than an airbag that might not work, I have read that these airbags also have their negative aspects to remember.
1992 Slightly Modified Hilux, 2008 VW Caddy panelvan work, 2010 Isuzu 2.5 td bakkie for work, a pair of big 'balloons' as well hanging at the rear of my Hilux
simoan
simoan
- Andries
- LR 4WD Rear Locker
- Posts: 318
- Joined: Thu Jul 12, 2007 7:29 pm
- Town: Dordrecht
- Vehicle: '94 2.2 4Y Hilux S/C, '87 2.2 4Y Hilux D/C
- Real Name: Andries
- Location: Eastern cape
Re: Manufacturing your own type ARB front bumper
Hi Guys!
I am busy planning on building my own ARB bumper, for my Hilux's.
This is the templates I made. Still sorting out the places where it must be fitted to the chassis. Will keep you up to date.
I am busy planning on building my own ARB bumper, for my Hilux's.
This is the templates I made. Still sorting out the places where it must be fitted to the chassis. Will keep you up to date.
- Family_Dog
- Moderator
- Posts: 12697
- Joined: Tue May 22, 2007 10:09 am
- Town: Klerksdorp
- Vehicle: Hilux DC SFA, Hilux 2.7 DC, Hilux 2.7 SC, Prado 95 VX
- Real Name: Eric
- Club VHF Licence: HC101
- Location: Klerksdorp, NW
- Contact:
Re: Manufacturing your own type ARB front bumper
Andries,
I'm sure it's going to look very nice when you've finished it. But I note that you drink a lot of coffee when you're busy in your workshop
-F_D
I'm sure it's going to look very nice when you've finished it. But I note that you drink a lot of coffee when you're busy in your workshop
-F_D
White Fang: 1999 2.7i DC Raider 4x4
Bull Dog: 1987 4Y-EFI 2.2 DC 4x4
Pra Dog: 1998 Prado VX 3.4
Hound Dog: 2000 2.7i SC 4x4
One Staffie, One Jack Russell, One Ring Neck Screecher, 17 Fish of questionable heritage
-
- LR 4WD Rear Locker
- Posts: 322
- Joined: Tue Jun 26, 2007 10:33 am
- Town: Kathu
- Vehicle: 2.4 Hi Lux 4x4 DC 95'
- Real Name: Eben
- Club VHF Licence: ZS3EP
- Location: Kathu
Re: Manufacturing your own type ARB front bumper
I love the looks of the bull bars and I was wondering if I can put in my order for nice looking bull bar from you Simon. Let me know if you will build one for me. I would love to remove the current bull bar and bumper and replace it.
Eben Pienaar
2.4 Hi Lux 22R 95'
Codan HF radio; Kenwood VHF Hi band; Tait VHF midband; Snorkel; OME suspension; Diff lock on next shortlist. Dis lekker om 'n mens te wees....Jy moet net 'n lekker mens wees
2.4 Hi Lux 22R 95'
Codan HF radio; Kenwood VHF Hi band; Tait VHF midband; Snorkel; OME suspension; Diff lock on next shortlist. Dis lekker om 'n mens te wees....Jy moet net 'n lekker mens wees
- Andries
- LR 4WD Rear Locker
- Posts: 318
- Joined: Thu Jul 12, 2007 7:29 pm
- Town: Dordrecht
- Vehicle: '94 2.2 4Y Hilux S/C, '87 2.2 4Y Hilux D/C
- Real Name: Andries
- Location: Eastern cape
Re: Manufacturing your own type ARB front bumper
Ek het uiteindelik die plaat gekry. Plaat aanmekaar gespot weld. Moet nog die gate vir flikkerligte sny, pyp laat buig vir bullbar en dan die bumper afhaal en verf.
- Family_Dog
- Moderator
- Posts: 12697
- Joined: Tue May 22, 2007 10:09 am
- Town: Klerksdorp
- Vehicle: Hilux DC SFA, Hilux 2.7 DC, Hilux 2.7 SC, Prado 95 VX
- Real Name: Eric
- Club VHF Licence: HC101
- Location: Klerksdorp, NW
- Contact:
Re: Manufacturing your own type ARB front bumper
Andries, it's looking good, as per your usual standard of work. Can't wait to see the final product!
-F_D
-F_D
White Fang: 1999 2.7i DC Raider 4x4
Bull Dog: 1987 4Y-EFI 2.2 DC 4x4
Pra Dog: 1998 Prado VX 3.4
Hound Dog: 2000 2.7i SC 4x4
One Staffie, One Jack Russell, One Ring Neck Screecher, 17 Fish of questionable heritage
- Cookie Monster
- LR 4WD Full Lockers
- Posts: 968
- Joined: Tue Jun 26, 2007 7:02 am
- Town: Port Elizabeth
- Vehicle: 2006 Hilux DC V6 Auto 4x4 Oldman Emu suspension
- Real Name: Justin
- Location: Eastern Cape
- Contact:
Re: Manufacturing your own type ARB front bumper
Looks good cant wait to start with mine :!:
2006 Hilux DC 4x4 4.0 V6 Old Man Emu suspension, Long Range Fuel Tank and a LA Sport Sump Guard, Natko railings with spade and high lift brackets, LA Sport high lift jack mounts, Powder coated Hilux Nudge Bar, Hella LED light bar, LED Work Light
- Andries
- LR 4WD Rear Locker
- Posts: 318
- Joined: Thu Jul 12, 2007 7:29 pm
- Town: Dordrecht
- Vehicle: '94 2.2 4Y Hilux S/C, '87 2.2 4Y Hilux D/C
- Real Name: Andries
- Location: Eastern cape
Re: Manufacturing your own type ARB front bumper
Die bumper is amper klaar. Het Volkswagen Golf flikkerligte gebruik. Klaar geweld, nou net verf.
- CasKru
- Moderator
- Posts: 23956
- Joined: Tue Dec 04, 2007 11:52 am
- Town: Benoni
- Vehicle: '94 Hilux Raider 2.4i (22RE) DC 4x4
- Real Name: Cassie
- Club VHF Licence: B15
- Location: Rynfield
Re: Manufacturing your own type ARB front bumper
Very nicely done there! I'm taking a wild guess.... this is not your first time welding and working with metal hey?!
To God be the glory
- Scorpion
- Monster Truck
- Posts: 2158
- Joined: Wed Jan 16, 2008 6:31 pm
- Town: Emmarentia
- Vehicle: 1988 Hilux 4x4 D/C with more attitude than Mike Tyson
- Real Name: Johann
- Location: Constant Kloof
Re: Manufacturing your own type ARB front bumper
Looks great! Don't forget to post pics of the final product!
1988 Hilex D/C 4x4 (Import spec), Lexus V8; Marlin Crawler; Custom Suspension: front and new 4 link in the rear; Disc Brake conversion rear; 35" Cooper STT tyres; Xenon lights; Custom bullbar;Next? Aircon; new front seats, redo the whole interior in nice soft leather, Respray, Double Lockers
1978 Land Cruiser HJ45
1971 Mercedes Benz 280S Automatic
2011 Land Cruiser 79 V6 (60th Anniversary Edition)
1978 Land Cruiser HJ45
1971 Mercedes Benz 280S Automatic
2011 Land Cruiser 79 V6 (60th Anniversary Edition)
- Andries
- LR 4WD Rear Locker
- Posts: 318
- Joined: Thu Jul 12, 2007 7:29 pm
- Town: Dordrecht
- Vehicle: '94 2.2 4Y Hilux S/C, '87 2.2 4Y Hilux D/C
- Real Name: Andries
- Location: Eastern cape
Re: Manufacturing your own type ARB front bumper
Uiteindelik klaar!!!!!
Caskru, welding en ysters is my stokperdjie. Het 10 jaar gelede my 3de "pypkar" gebou(voertuig se "blikwerk" is meestal pyp.) Dit is my voertuig waarmee ek in die veld ry, daar is niks wat kan krap nie. Simon praat van die Farmgate. Is tans besig om Willys CJ2 te bou, bestaande uit 2mm plaat en baie weld werk. Kyk onder Members Rides, Andries and his Jeep Project.
Hier is foto's van die eindproduk.
Caskru, welding en ysters is my stokperdjie. Het 10 jaar gelede my 3de "pypkar" gebou(voertuig se "blikwerk" is meestal pyp.) Dit is my voertuig waarmee ek in die veld ry, daar is niks wat kan krap nie. Simon praat van die Farmgate. Is tans besig om Willys CJ2 te bou, bestaande uit 2mm plaat en baie weld werk. Kyk onder Members Rides, Andries and his Jeep Project.
Hier is foto's van die eindproduk.
- Bfreesani
- Low Range 4WD
- Posts: 176
- Joined: Thu Jan 10, 2008 7:31 am
- Town: Roodepoort
- Vehicle: Nissan Sani 2.7TD
- Real Name: David
Re: Manufacturing your own type ARB front bumper
Hey Andries
That bumper looks great.
I am also wanting to do something like that for my Hillbilly specifically because I like the original bullbar shape and design, but think it can be adapted to ARB type but keeping the basic look.
What is the thickness of the steel plate, the upright and the pipe you used. What is the final weight of your bumper?
That bumper looks great.
I am also wanting to do something like that for my Hillbilly specifically because I like the original bullbar shape and design, but think it can be adapted to ARB type but keeping the basic look.
What is the thickness of the steel plate, the upright and the pipe you used. What is the final weight of your bumper?
Later....
David
Hillbilly
David
Hillbilly
- Family_Dog
- Moderator
- Posts: 12697
- Joined: Tue May 22, 2007 10:09 am
- Town: Klerksdorp
- Vehicle: Hilux DC SFA, Hilux 2.7 DC, Hilux 2.7 SC, Prado 95 VX
- Real Name: Eric
- Club VHF Licence: HC101
- Location: Klerksdorp, NW
- Contact:
Re: Manufacturing your own type ARB front bumper
Andries,
Ek was besig om iets te tik vir jou om te help me photobucket, maar lyk my jy't reggekom!
The BB looks fantastic! A job very professionally done. Maybe you should forward it to SA4x4 for inclusion as a possible article?
-F_D
Ek was besig om iets te tik vir jou om te help me photobucket, maar lyk my jy't reggekom!
The BB looks fantastic! A job very professionally done. Maybe you should forward it to SA4x4 for inclusion as a possible article?
-F_D
White Fang: 1999 2.7i DC Raider 4x4
Bull Dog: 1987 4Y-EFI 2.2 DC 4x4
Pra Dog: 1998 Prado VX 3.4
Hound Dog: 2000 2.7i SC 4x4
One Staffie, One Jack Russell, One Ring Neck Screecher, 17 Fish of questionable heritage
- Engel
- Low Range 4WD
- Posts: 234
- Joined: Sat Dec 08, 2007 9:12 pm
- Town: Kempton Park
- Vehicle: Datsun & Nissan 4x4
- Real Name: Herman
Re: Manufacturing your own type ARB front bumper
very naaice !!!
For anything offroad: herman@angeloffroad.co.za
Pofadder recovery kits @ wholesale prices
Pofadder recovery kits @ wholesale prices
- Andries
- LR 4WD Rear Locker
- Posts: 318
- Joined: Thu Jul 12, 2007 7:29 pm
- Town: Dordrecht
- Vehicle: '94 2.2 4Y Hilux S/C, '87 2.2 4Y Hilux D/C
- Real Name: Andries
- Location: Eastern cape
Re: Manufacturing your own type ARB front bumper
Hi David
The bumper upright plate is 6mm steel plate is 3mm final weight is 22 kg .Used VW Golf flikers .
The bumper upright plate is 6mm steel plate is 3mm final weight is 22 kg .Used VW Golf flikers .
- SYRON CONVERSIONS
- LR4WD, Lockers, Crawler Gears
- Posts: 1494
- Joined: Fri May 18, 2007 8:51 pm
- Town: Tamboekieland
- Vehicle: SFA HILUX
- Real Name: SIMON
- Location: Tamboekieland
Re: Manufacturing your own type ARB front bumper
Guys if you want a bull bar like this, you can ask Andries to manufacture you one, however you would have to take your vehicle to him, the reason why I say this is because some vehicles have body lifts and the bull bar will have to be manufactured to fit your vehicle and headlights.
Also Andries uses an arc welder that is connected to the rear of his tractor via a PTO, he does not have 220 volt electricity like you and I, he has to start his Lister gen set, in the one pic, you can see that his air compressor has its own engine mounted onto it as well.
Whatever Andries manufactures, he does it correct the first time, even when he made a few babies with his wife
An article appeared a few years back in The SA 4X4 Magazine about the CJ 2 Willy's Jeep that Andries has been busy manufacturing from nothing, he built the chassis and then the body and then manufactured all the other parts as well, I gave him an old bull bar and he cut up the pipe and manufactured his own exhaust pipe from this metal.
Honey please bring me some more coffee
Also Andries uses an arc welder that is connected to the rear of his tractor via a PTO, he does not have 220 volt electricity like you and I, he has to start his Lister gen set, in the one pic, you can see that his air compressor has its own engine mounted onto it as well.
Whatever Andries manufactures, he does it correct the first time, even when he made a few babies with his wife
An article appeared a few years back in The SA 4X4 Magazine about the CJ 2 Willy's Jeep that Andries has been busy manufacturing from nothing, he built the chassis and then the body and then manufactured all the other parts as well, I gave him an old bull bar and he cut up the pipe and manufactured his own exhaust pipe from this metal.
Honey please bring me some more coffee
1992 Slightly Modified Hilux, 2008 VW Caddy panelvan work, 2010 Isuzu 2.5 td bakkie for work, a pair of big 'balloons' as well hanging at the rear of my Hilux
simoan
simoan