hi all, was just thinking what are the benefits if you fit an uprated torsion bar to an IFS hilix, I cant really figure it out, I do get that you going get a stiffer spring rate hence less sag, if you fit a arb bbar an winch, but if you dont then from what I understand you are not going to get any lift by fitting one, then you might aswell turn up your std bars and fit a ome rear blades, please correct me if I am wrong.
Ismail
benefits from fitting OME torsion bar
- ismail
- LR 4WD Full Lockers
- Posts: 758
- Joined: Fri Jul 13, 2007 10:05 am
- Town: Cape Town
- Vehicle: Hilux '03 2700i SC 4x4
- Real Name: Ismail
- Location: Cape Town
benefits from fitting OME torsion bar
'93 DC 2.2 4x4 33" BF KM2's 60mm lift, Fakawi Canvas Canopy. SOLD
'03 SC 2700i 4x4 32" BFG KM2, SAC stage 1, OME springs, Rancho 9000XL shocks, ARB, Escape Gear seatcovers - goes like a bomb!!!!!!!!!
I surf more than I work
'03 SC 2700i 4x4 32" BFG KM2, SAC stage 1, OME springs, Rancho 9000XL shocks, ARB, Escape Gear seatcovers - goes like a bomb!!!!!!!!!
I surf more than I work
- witmamba
- LR 4WD Full Lockers
- Posts: 911
- Joined: Mon Mar 29, 2010 9:29 am
- Town: Sasolburg
- Vehicle: D4D 4x4 Lux + D4D 4x4 Tuna
- Real Name: Hans
Re: benefits from fitting OME torsion bar
I fitted the OME torsion bars as the standard ones couldn't handle the bullbar & winch. It makes a helluva difference as I now have the required lift with a comfortable ride, aswell as plenty wheel travel. It rides even softer now than it did before. Costs about R.3700 but well worth it.
Life only starts . . . . where comfortlevels end
-
- Low Range 4WD
- Posts: 118
- Joined: Wed Sep 05, 2007 4:58 pm
- Town: JHB
- Vehicle: Isuzu 3.0 D-tec
- Real Name: Darrell
Re: benefits from fitting OME torsion bar
Hi Ismail.
The torsion bars give you added stabilityt if you going to add weight up front.
Your spline is the same number of teeth.Original bars are 24.5mm and aftermarket are 26.5 or 27 mm.
Rate is increased by 20 Percent.If you turn up remember you must have at least 60mm of downward
travel on your shock else it drives uncomfortable.
Regards
Darrell
Mikem Suspensions
The torsion bars give you added stabilityt if you going to add weight up front.
Your spline is the same number of teeth.Original bars are 24.5mm and aftermarket are 26.5 or 27 mm.
Rate is increased by 20 Percent.If you turn up remember you must have at least 60mm of downward
travel on your shock else it drives uncomfortable.
Regards
Darrell
Mikem Suspensions