Page 1 of 1
Help with instrumentation after Lexus Conversion
Posted: Tue May 17, 2016 10:30 am
by Llew Mac
good day
I have just put my 1996 Hilux 2.8D Raider DC 4x2 back on the road after a lexus transplant. And what a transformation it is.
It was a hard road doing this conversion alone,after work in the evenings and on Saturdays. It took me 7 weeks of evenings and Saturdays, and it spent a week at the exhaust guy.But the driving experience is awesome.I have been driving my Hilux for 15 years, and in february the oilpump failed on the diesel.
I opted for the lextreme prewired 1UZ VVTi and kept the autobox. I'm new to driving automatic, but i rather enjoy it now.
I have got it starting from the key as it should but im completely baffled cause i cant get any of the instruments to work. i have the fuel gauge and the oil light and the heat gauge working, but what is the option with regards to a speedo and a revcounter??
I have a loose revcounter working on the a-pillar, but is there no option to get a more stock looking solution??
I have looked at the Acewell ACE-7659, but it just doesnt suit the hilux to my opinion......
Any ideas??
Re: Help with instrumentation after Lexus Conversion
Posted: Tue May 17, 2016 11:44 am
by Knuppel
Llew, can't you get the OEM rev counter to work again. just get an electronics place to make up a unit as per in the link. Mine cost me R320! That was 1 Hour labour @R300 + R20 parts.
http://www.lextreme.co.za/solid-axle-hi ... -lexus-v8/" onclick="window.open(this.href);return false;
Re: Help with instrumentation after Lexus Conversion
Posted: Tue May 17, 2016 11:59 am
by Llew Mac
i will have look around for a place to do it. Any advice on a speedometer??
Re: Help with instrumentation after Lexus Conversion
Posted: Tue May 17, 2016 1:39 pm
by Agteros
Llew Mac wrote:i will have look around for a place to do it. Any advice on a speedometer??
I got a quote for a Lexus V8 conversion yesterday from a guy and this is what he put at the top of the quote:
As the Lexus 5 speed gearbox has a digital speed pulse the older
mechanical speedo's will not function on 4x2 conversions
I hope I am not the bearer of bad news
Re: Help with instrumentation after Lexus Conversion
Posted: Tue May 17, 2016 2:20 pm
by Llew Mac
is it really possible that all the SFA lexus powered hiluxes dont have a functioning speedo??
Oom Traffic gaan ons mos vreeslik likes.......
Thx Agteros...
Re: Help with instrumentation after Lexus Conversion
Posted: Tue May 17, 2016 3:18 pm
by Knuppel
How about you get one of those racing clusters and see if you can fit the gauge into the existing unit
Something like this
Re: Help with instrumentation after Lexus Conversion
Posted: Tue May 17, 2016 6:04 pm
by ChrisF
Speak to IZAK at Dynotech Okavango Industrial area -
http://www.dynotech.co.za/" onclick="window.open(this.href);return false;
Hy is n bietjie kortaf in die begin. Maar KEN sy storie !!!!!
En hy het al BAIE Lexus conversions gedoen.
Re: Help with instrumentation after Lexus Conversion
Posted: Tue May 17, 2016 6:41 pm
by grips
You can opt for a gear driven GPS unit for the speedo from Auto Meter.
http://www.hotrod.com/how-to/interior-e ... converter/" onclick="window.open(this.href);return false;
I have two 4x4 vehicles fitted with the electronic interphase units. Very accurate and reliable.
Re: Help with instrumentation after Lexus Conversion
Posted: Sat May 21, 2016 7:28 pm
by Llew Mac
Evenings All
Can anyone maybe share some insight into the option of a Quantum or Hilux 20009 instrument cluster??
Or does these ones need some sort of computer interface to get it operational?
I seriously enjoy my Lexus! But in poefies-scared for oom traffic?
Any ideas gents??
Re: Help with instrumentation after Lexus Conversion
Posted: Sat May 21, 2016 8:41 pm
by ChrisF
GPS will give you accurate speed reading - until you get the cluster sorted.
Most modern cameras also have such a GPS function.
Re: Help with instrumentation after Lexus Conversion
Posted: Sun May 22, 2016 8:56 pm
by pietpetoors
Christo that looks like a great idea, can one get it locally or do you have to import it?
Re: Help with instrumentation after Lexus Conversion
Posted: Thu Jul 28, 2016 12:02 pm
by LeCruLux-Phillip
I have the same problem.....
The idea I have is to fit a fortuner/hilux 2014 model speedo cluster with a unit to calibrate it to gps speed.
speedo healer for bikes but can be used on vehicles as well.
http://www.healtech-electronics.com/products/sh/" onclick="window.open(this.href);return false;
Can anyone tell if it will work?
Re: Help with instrumentation after Lexus Conversion
Posted: Sun Jul 31, 2016 6:18 pm
by Andries
Die speedo opdie 4x4 werk mos met n kabel vanaf die transver box so wat is die probleem as dit auto is maak jy n adaptor tussen auto en transver box en hy werk met oorspronklike cable.