1uz clutch
-
- Low Range 4WD
- Posts: 136
- Joined: Tue Dec 06, 2011 9:30 am
- Town: Muscat and Midrand
- Vehicle: 2.7 Hilux 4x4
- Real Name: Roelof
1uz clutch
Hi everyone
Can someone please tell me what the OD of the 1uz ring gear is?
I am trying to figure out the biggest pressure plate that can fit into the bell housing.
Thanks.
Can someone please tell me what the OD of the 1uz ring gear is?
I am trying to figure out the biggest pressure plate that can fit into the bell housing.
Thanks.
- LouisZ
- Monster Truck
- Posts: 2175
- Joined: Tue Feb 05, 2008 1:51 pm
- Town: Pretoria
- Vehicle: Toyota Hilux D/C 1996
- Real Name: Louis
- Location: Pretoria, Centurion
Re: 1uz clutch
Ok, the od is +/-270mm. You will use the vvTi clutch on it that is 270mm.
-
- Low Range 4WD
- Posts: 136
- Joined: Tue Dec 06, 2011 9:30 am
- Town: Muscat and Midrand
- Vehicle: 2.7 Hilux 4x4
- Real Name: Roelof
Re: 1uz clutch
Thanks Louis
270mm sounds a bit small though. The bellhousing is about 325mm where the ringgear goes. Normally the ringgear will just clear the inside of the housing. Any more info?
270mm sounds a bit small though. The bellhousing is about 325mm where the ringgear goes. Normally the ringgear will just clear the inside of the housing. Any more info?
- LouisZ
- Monster Truck
- Posts: 2175
- Joined: Tue Feb 05, 2008 1:51 pm
- Town: Pretoria
- Vehicle: Toyota Hilux D/C 1996
- Real Name: Louis
- Location: Pretoria, Centurion
Re: 1uz clutch
Remember that is the clutch plate dia. Now the flywheel & pressure plate have to come on aswell, then you only have a few mm to spare into the bellhousing.
I recon you want to use a manual gearbox?
I recon you want to use a manual gearbox?
- Hoppy
- Monster Truck
- Posts: 5784
- Joined: Mon Jan 07, 2008 10:15 pm
- Town: Cape Town
- Vehicle: Hilux SFA & IFS
- Real Name: Allan 0721291160
Re: 1uz clutch
Fana makes a special setup that uses the Dyna or Kzte clutch, his nr is: 083 752 1655
aev@iburst.co.za
The trouble with trouble is...it always starts as fun.
The most precious jewels you will ever wear around your neck is the arms of your children...
" I WOULD RATHER SIT ON THE TAILGATE OF MY HILUX WITH A BEER AND A CHOP, WATCHING A FIRE, THAN DINE IN THE BEST RESTAURANT IN TOWN "
-
- Low Range 4WD
- Posts: 136
- Joined: Tue Dec 06, 2011 9:30 am
- Town: Muscat and Midrand
- Vehicle: 2.7 Hilux 4x4
- Real Name: Roelof
Re: 1uz clutch
Hi Guys
Thanks a lot for the info.
Yip I want to go manual but Im a bit cautious about the clutch. Heard too many horror stories and actually seen one that completely stripped the splines of the friction plate.
Therefore I am looking at a unit from AP racing, meant for road use. The friction plate is 267mm and rated for about 600 Nm. Yes I know its going to cost a bit but I dont want to change it every 10 000km.
Thanks a lot for the info.
Yip I want to go manual but Im a bit cautious about the clutch. Heard too many horror stories and actually seen one that completely stripped the splines of the friction plate.
Therefore I am looking at a unit from AP racing, meant for road use. The friction plate is 267mm and rated for about 600 Nm. Yes I know its going to cost a bit but I dont want to change it every 10 000km.
- Gunta
- LR4WD, Lockers, Crawler Gears
- Posts: 1872
- Joined: Tue Feb 23, 2010 10:36 am
- Town: Johannesburg
- Vehicle: 1996 80 series Land Cruiser VX 4500 EFI UK Import. Long range tank, Iron man suspension, ARB Bullbar, Front and rear diff locks, 33" BFG muds, Snorkel and attitude.
- Real Name: Mark
- Location: Tofo mozambique.
Re: 1uz clutch
What are they asking for one of those clutches?
Worry about the things you can do something about, If you can't don't worry.
Live life to the fullest with no regrets.
Live life to the fullest with no regrets.
-
- Low Range 4WD
- Posts: 136
- Joined: Tue Dec 06, 2011 9:30 am
- Town: Muscat and Midrand
- Vehicle: 2.7 Hilux 4x4
- Real Name: Roelof
Re: 1uz clutch
Sorry Gunta but I dont have a price yet.
Im still waiting for supplier to get back from
Im still waiting for supplier to get back from
- Gunta
- LR4WD, Lockers, Crawler Gears
- Posts: 1872
- Joined: Tue Feb 23, 2010 10:36 am
- Town: Johannesburg
- Vehicle: 1996 80 series Land Cruiser VX 4500 EFI UK Import. Long range tank, Iron man suspension, ARB Bullbar, Front and rear diff locks, 33" BFG muds, Snorkel and attitude.
- Real Name: Mark
- Location: Tofo mozambique.
Re: 1uz clutch
Cool let me know.
Worry about the things you can do something about, If you can't don't worry.
Live life to the fullest with no regrets.
Live life to the fullest with no regrets.
- TheoM
- Low Range 4WD
- Posts: 179
- Joined: Sat Mar 17, 2012 2:29 pm
- Town: Cape Town
- Vehicle: UZJ 42 LX
- Real Name: Theo
Re: 1uz clutch
Hiluxfan_111 wrote:Sorry Gunta but I dont have a price yet.
Im still waiting for supplier to get back from
Any news yet ?
-
- Low Range 4WD
- Posts: 136
- Joined: Tue Dec 06, 2011 9:30 am
- Town: Muscat and Midrand
- Vehicle: 2.7 Hilux 4x4
- Real Name: Roelof
Re: 1uz clutch
Sorry Theo, no news yet.
As with so many things, nothing happens if you dont follow up.
And I haven't had a chance.
As with so many things, nothing happens if you dont follow up.
And I haven't had a chance.
- kfxnando
- LR4WD, Lockers, Crawler Gears
- Posts: 1706
- Joined: Mon Feb 01, 2010 4:33 pm
- Town: Germiston
- Vehicle: Ford V6 3.4 Courrier soon to be powered by Yamaha!! Jeep GC 4.7 V8, Aygo broken traded for a Kia Picanto.2ex, 2012 Jeep GC 5.7 V8 Ovrrland
- Real Name: Fernando
- Contact:
Re: 1uz clutch
not quiet sure how to to this gently, so here goesHiluxfan_111 wrote:Hi Guys
Thanks a lot for the info.
Yip I want to go manual but Im a bit cautious about the clutch. Heard too many horror stories and actually seen one that completely stripped the splines of the friction plate.
Therefore I am looking at a unit from AP racing, meant for road use. The friction plate is 267mm and rated for about 600 Nm. Yes I know its going to cost a bit but I dont want to change it every 10 000km.
beware of all the myths and Bs stories out there, people will find bad stuff to say about anything
as for striving the spines on the clutch, I want to see that one, not enough traction or torque for that one, and of that me 100% sure
self have broken the rivets that hold the centre piece of the clutch to the friction plate together
however will not buy that product brand again, that was Valeo clutch
go with a good brand such a Luk Repco, and you won't need any expensive custom stuff
self will be using the original clutch set up, just will be fitting new parts
just see what the other guy on here are using
good luck
http://www.youtube.com/user/kfxnando" onclick="window.open(this.href);return false;
http://community.webshots.com/user/kfxnando" onclick="window.open(this.href);return false;
http://s538.photobucket.com/albums/ff343/kfxnando/" onclick="window.open(this.href);return false;
http://community.webshots.com/user/kfxnando" onclick="window.open(this.href);return false;
http://s538.photobucket.com/albums/ff343/kfxnando/" onclick="window.open(this.href);return false;