Hilux tie rod ends - normal price?

Having problems with your vehicle? Or need advice on repairing or servicing your Hilux? This is the place to ask for help
Post Reply
andyrag
Newbie
Posts: 1
Joined: Tue Sep 28, 2010 12:12 pm
Town: Palapye
Vehicle: Hilux DC 2.7i 3RZ
Real Name: Andrew

Hilux tie rod ends - normal price?

Post by andyrag »

I have just been quoted P2500 (R2700) for new tie rod ends for my hilux 2.7 (3RZ-FE). Both sides inner and outer

Is this a normal price? I was rather shocked but I don't recall having to replace them so have no idea what I should expect
Top
User avatar
BlumTRD
LR 4WD Full Lockers
LR 4WD Full Lockers
Posts: 502
Joined: Wed Aug 29, 2007 9:08 am
Town: South Africa
Vehicle: Hilux
Real Name: David
Location: Pretoria

Re: Hilux tie rod ends - normal price?

Post by BlumTRD »

Try


Suspension City438 DF Malan DvePretoria0001Phone: 012 3232227

sent from Samsung galaxy S3
Top
User avatar
Thunder02
Moderator
Moderator
Posts: 8033
Joined: Fri Nov 26, 2010 7:53 pm
Town: East Rand
Vehicle: IFS Hilux
Real Name: Neil
Club VHF Licence: HC105
Location: 4x4 Direct Boksburg
Contact:
Contact Thunder02

Re: Hilux tie rod ends - normal price?

Post by Thunder02 »

Wow,welcome Andrew,that is a bit hefty :crazy:
Not all those who wander are lost!

Scout motto:be prepared....
www.4x4direct.co.za
Email: boksburg@4x4direct.co.za
IFS is like a swambo, soft, sexy and expensive!
Top
User avatar
Blaps
LR 4WD Rear Locker
LR 4WD Rear Locker
Posts: 382
Joined: Thu May 27, 2010 6:08 pm
Town: Rustenburg
Vehicle: Hilux 4x4 Ford V6
Real Name: Ben
Location: Olifantsnek

Re: Hilux tie rod ends - normal price?

Post by Blaps »

Welcome Andrew, that sounds like a ripoff to me
For my BMW i paid R950 for inner & outer
Go, just go.... Somewhere.... Out There...
Image
Top
Mikem1
Low Range 4WD
Low Range 4WD
Posts: 118
Joined: Wed Sep 05, 2007 4:58 pm
Town: JHB
Vehicle: Isuzu 3.0 D-tec
Real Name: Darrell

Re: Hilux tie rod ends - normal price?

Post by Mikem1 »

Hi Guys.
Genuine toyota parts cost a fortune i just paid R450 for a ball joint.As a supplier its heavy but id rather use that and never see the customer again.The cost of doing the job twice and the inconvenience is very real when you cut corners!
But how often does one need to change it?
Pirate parts dont last especially on off road vehicles.

Regards
Darrell
Mikem Suspensions
Top
Post Reply

Return to “The Workshop”