IFS rear bumper

[Bushwacker]

My version of a IFS rear bumper...

[Haboob]

That is very very nice Piet...

[4x4BEES]

Baie mooi

[JohanW]

Sjoe Piet, daai is baie netjies! Jy wil nie dalk die planne uit leen nie... Ek sal graag vir my self een soos daardie wil bou.

[Bushwacker]

Sorry Johan maar ek bou dit vir my werk.

[Thabogrobler]

Super Like!!!!

Prys?

[Bushwacker]

R7926.00 incl. vat, excluding fitment.

[JohanW]

Dis ook 'n goeie antwoord. Ek sal as my skepe in kom binne 'n maand of twee bietjie kom aanklop vir ene.

[Toppie4x4]

Kan hy twee spaarwiele op kry??

[Bushwacker]

Ek sal dit kan doen ja
Die prys moet jy by Stoffel kry 060 0503 5482.
Email: stoffel@bunduoutdoor.co.za
dankie

[Ultred]

Ek stel ook defnatief belang as hy die 2 spaarwiel carriers kan vat.
Ek probeer net kyk op die fotos, ek sien die recovery points maar niks vir die highlift points nie. Kan julle so iets by sit?

[Bushwacker]

Ek het nou nie een in voorraad nie, die groen pyl wys waar die highlift tube is, en die rooi pyl wys die recovery punt.
Die hele bumper is 4mm staal, en die mounts is 10mm staal.

[Family_Dog]

Very nice bumper, Piet. Well done!


-F_D

[Ultred]

Het nounet my quote gekry vir bumper met 2 x sparewheel carrier. En die design wys alles wat ek wil op he.
SOLD

[MOFASA]

Very nice....

pm me your details maybe we will buy some bumpers from you guys in the near future....

[drew3]

Bit of a necro-post , but did mounting this require any cutting of the body?

[Thunder02]

Bit of a necro-post , but did mounting this require any cutting of the body?

Morning Drew, no there is no cutting to be done, straight bolt on. I have one of their bumpers on my IFS, more than happy with it.

[Wildewil]

Piet...Sien op jou tekening, vorm is mooi uigedink! 4mm Staal - klink of dit gewigtig is!

[drew3]

Bit of a necro-post , but did mounting this require any cutting of the body?

Morning Drew, no there is no cutting to be done, straight bolt on. I have one of their bumpers on my IFS, more than happy with it.

Thanks Thunder. I was considering building my own, with a wheel carrier, but this work looks really good - I would not be able to mimic that.

Sent from my SM-A300FU using Tapatalk

[Thunder02]

Bit of a necro-post , but did mounting this require any cutting of the body?

Morning Drew, no there is no cutting to be done, straight bolt on. I have one of their bumpers on my IFS, more than happy with it.

Thanks Thunder. I was considering building my own, with a wheel carrier, but this work looks really good - I would not be able to mimic that.

Sent from my SM-A300FU using Tapatalk

Drew, drop me a mail to neil@4x4direct.co.za if you interested in one.
Prices have gone up since Piet posted the thread, but lets see what we can do.

[Thunder02]

Just to tease a it

[TertiusK]

[drew3]

Just to tease a it

IFS rear bumper.jpg

Really looks great Thunder, and I want the spare wheel carrier too!

Will give you a shout when I'm ready.

Sent from my SM-A300FU using Tapatalk

[drew3]

Just to tease a it

Hi Neill,

From an older post I can see you also planned on installing a long range fuel tank. I plan basically the same setup - aluminium canopy, rear bumper with wheel carrier and the 70l extra tank where the spare wheel would normally go. By my calculations that's about 250 kilograms of constant load (with a full tank). Have you done anything to your suspension to account for the extra weight?

Also, is that a 30x9.5 you have on the spare wheel carrier?

[Thunder02]

Just to tease a it

Hi Neill,

From an older post I can see you also planned on installing a long range fuel tank. I plan basically the same setup - aluminium canopy, rear bumper with wheel carrier and the 70l extra tank where the spare wheel would normally go. By my calculations that's about 250 kilograms of constant load (with a full tank). Have you done anything to your suspension to account for the extra weight?

Also, is that a 30x9.5 you have on the spare wheel carrier?

Hi Drew, we currently fitting a 120L long range tank to my hilux, I have 31 inch all terrain tires currently, but will be changing to muds. Darrel from Mikem has done a custom suspension to the hilux with a 40 mm body lift. Worth every cent spent, she handles great on and off road.