Advice on Kzte Ball joint replacement
- Drifter X
- High Range 4WD
- Posts: 57
- Joined: Mon Jul 18, 2011 10:44 pm
- Town: Fourways
- Vehicle: Toyota Hilux Kzte
- Real Name: Ranesh
- Location: Fourways
Advice on Kzte Ball joint replacement
Greetings guys, I need to change ball joints on my Kzte. I originally had a set of original toyota ball joints that lasted about 2 years. They were replaced with part-quip about 3 months ago and i have already noticed a knocking sound from the RHS when going over a bump. I checked the ball joints, there is a slight play on all 4. I was actually interested in finding a heavy duty ball joint locally but there's nothing available or perhaps I am not looking in the correct places. I found out from Gemini parts and they mentioned that they stock a Japanese make that is very good, my concern is this is 1/7th the price of the original part so the quality is questionable? Any advice on what make ball-joint I should go for that is good quality and will last?
-
- Monster Truck
- Posts: 5271
- Joined: Sun Aug 19, 2007 10:43 pm
- Town: Pretoria
- Vehicle: '02 'Lux KZ
- Real Name: Thabo
- Club VHF Licence: x223
- Location: Garsfontein
- Contact:
Re: Advice on Kzte Ball joint replacement
What does the originals go for?
'02 KZ 'Lux. Cooled. Chipped. Onca'd. Cherished!
If you are a diesel fan, raise your hand.
If you aren't raising your hand, raise your standards!
A 4x4 is merely a machine that enables you to get stuck further away from civilization.
If you are a diesel fan, raise your hand.
If you aren't raising your hand, raise your standards!
A 4x4 is merely a machine that enables you to get stuck further away from civilization.
- Drifter X
- High Range 4WD
- Posts: 57
- Joined: Mon Jul 18, 2011 10:44 pm
- Town: Fourways
- Vehicle: Toyota Hilux Kzte
- Real Name: Ranesh
- Location: Fourways
Re: Advice on Kzte Ball joint replacement
Works out to around R4600-00 for the set of upper and lower balljoints
-
- Monster Truck
- Posts: 5271
- Joined: Sun Aug 19, 2007 10:43 pm
- Town: Pretoria
- Vehicle: '02 'Lux KZ
- Real Name: Thabo
- Club VHF Licence: x223
- Location: Garsfontein
- Contact:
Re: Advice on Kzte Ball joint replacement
Eina!!
'02 KZ 'Lux. Cooled. Chipped. Onca'd. Cherished!
If you are a diesel fan, raise your hand.
If you aren't raising your hand, raise your standards!
A 4x4 is merely a machine that enables you to get stuck further away from civilization.
If you are a diesel fan, raise your hand.
If you aren't raising your hand, raise your standards!
A 4x4 is merely a machine that enables you to get stuck further away from civilization.
- raider
- Low Range 4WD
- Posts: 101
- Joined: Fri Apr 11, 2008 10:55 am
- Town: Cape Town
- Vehicle: 96' Hilux Raider 2.4 4x4 SC, 12' Mitsubishi PJS 3.2 4x4
- Real Name: Zubair
Re: Advice on Kzte Ball joint replacement
We recently had to replace the ball joints on our Isuzu. Agents prices was very steep so opted for Partquip.
Purchased the Partquip balljoints but was advised not to install them as worm oem balljoints are safer than Partquip. Oem develop play but Partquip tend to break.
Was then advised to get a set from this company:
http://www.teknosa.co.za/?hide_mobile_view=1
Purchased the Partquip balljoints but was advised not to install them as worm oem balljoints are safer than Partquip. Oem develop play but Partquip tend to break.
Was then advised to get a set from this company:
http://www.teknosa.co.za/?hide_mobile_view=1