Corrugations were bad in some patches
Front Runner brackets failed
Near Camp Synchro my brackets on the roof rack - 3 broke off on the bend in a straight line. (corner of the L shape).
I managed to bolt Aluminuim angle iron to the bracket to ensure it was reinforced so we could get home
Once we were home, I went to lift the Bundutec Tent off the canopy with a Fredlin hoist and found that 4 of the six brackets had sheared in the same way. How scary is that as I had been driving around our town at 120 km/h....a good bump and it would have flown off and could have catastrophic results
Has anybody else had problems of a similar nature
There are 2 pictures showing the top edge break. Then there is a roof bar upon which the tent rested showing one bracket whole and the other broken off at the corner. Then there is a picture of the bracket reinforced with a piece of aluminium angle iron bolted together
I am concerned that other people could have the same problems and could cause serious accidents
![Image](https://i.imgur.com/YUakb86.jpg)
![Image](https://i.imgur.com/0ctnmzs.jpg)
![Image](https://i.imgur.com/UH5X3Oo.jpg)
![Image](https://i.imgur.com/1R8mdog.jpg)
![Image](https://i.imgur.com/Aj7Y9Ls.jpg)