Hi all.
Just looking for some help here, i have a 2006 Vigo Hilux , 3.0Ltr.
It has always had problems passing MOT due to handbreak, but failed this time due to handbreak and pedal break. when we jacked it up we found to be basically no rear breaks, so replace Master Cylinder, Break cylinders on the rear, Rear break pads, and new drums, and adjusted the break to the hand break would engage .Checked out the proportion loading valve and bled it out Bled out the system and still, as bad as ever, would anyone have any clue what in the blue blazes is going on..?
Thanks
Tony
rear breaks
- pietpetoors
- Moderator
- Posts: 10649
- Joined: Thu May 17, 2007 9:12 pm
- Town: Langebaan
- Vehicle: 2.7 Hilux 4x4 DC
- Real Name: Pieter
- Club VHF Licence: X27
- Contact:
Re: rear breaks
New shoes and new drums was supposed to fix it.
What happens when you tie the proportion valve up so the vehicle think that it is fully loaded. When fully loaded it will brake more at the rear.
What happens when you tie the proportion valve up so the vehicle think that it is fully loaded. When fully loaded it will brake more at the rear.
Only Dead Fish Go With The Flow!
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
-
- High Range 2WD
- Posts: 10
- Joined: Mon Jan 20, 2020 11:29 pm
- Town: dublin
- Vehicle: Toyota Hilux 3.0
- Real Name: Tony Hogg
Re: rear breaks
i would of thought so too, tried that, had the vavled tied up, while the jeep was up on the jacks, and tried breaks, really didnt have much of an impact , pretty much the same
- pietpetoors
- Moderator
- Posts: 10649
- Joined: Thu May 17, 2007 9:12 pm
- Town: Langebaan
- Vehicle: 2.7 Hilux 4x4 DC
- Real Name: Pieter
- Club VHF Licence: X27
- Contact:
Re: rear breaks
Did you double and tripple check bleeding
Only Dead Fish Go With The Flow!
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
- pietpetoors
- Moderator
- Posts: 10649
- Joined: Thu May 17, 2007 9:12 pm
- Town: Langebaan
- Vehicle: 2.7 Hilux 4x4 DC
- Real Name: Pieter
- Club VHF Licence: X27
- Contact:
Re: rear breaks
I found with new master sometimes an airlock in master. Dont pump wildly like most peoole do, press peddle slowly in, keep it there for 2 or 3 seconds, then release. On one of my vehicles that solved the problem
Only Dead Fish Go With The Flow!
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
- Mud Dog
- Moderator
- Posts: 29852
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: rear breaks
Also check that the assembly of the mechanism in the drum is correct that all the levers / springs / lugs are where they should be (after the slave cylinder replacement). Sometimes the shoes can be installed wrong side up.
Here it helps to have a manual or a schematic of what it should look like. Google images can help you there.
Here it helps to have a manual or a schematic of what it should look like. Google images can help you there.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
-
- High Range 2WD
- Posts: 10
- Joined: Mon Jan 20, 2020 11:29 pm
- Town: dublin
- Vehicle: Toyota Hilux 3.0
- Real Name: Tony Hogg
Re: rear breaks
Bled it out twice . Yes the drums are correct .