Hi there. My 2016 hilux dust covers are rattling. Toyota wans 3k to replace them. Do the dust covers generally need replacing or is there another way to stop the rattling noise
Sent from my SM-G985F using Tapatalk
Break dust covers
-
- High Range 2WD
- Posts: 21
- Joined: Tue May 09, 2017 1:42 pm
- Town: alberton
- Vehicle: 2013 hilux 3D4D 4x4 Auto
- Real Name: Brian
- pietpetoors
- Moderator
- Posts: 10650
- Joined: Thu May 17, 2007 9:12 pm
- Town: Langebaan
- Vehicle: 2.7 Hilux 4x4 DC
- Real Name: Pieter
- Club VHF Licence: X27
- Contact:
Re: Break dust covers
Which dust covers?
Only Dead Fish Go With The Flow!
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
-
- High Range 2WD
- Posts: 21
- Joined: Tue May 09, 2017 1:42 pm
- Town: alberton
- Vehicle: 2013 hilux 3D4D 4x4 Auto
- Real Name: Brian
Re: Break dust covers
It's the break dust shields on the front disk breaks.
Bakkie was I for service yesterday and told me 3.5k to replace as they are worn out. I told them no. When I fetched the bakkie they said they managed to bend them a bit and now the rattling has stopped. For how long I don't know. But I don't see them wearing out like they said.
Sent from my SM-G985F using Tapatalk
Bakkie was I for service yesterday and told me 3.5k to replace as they are worn out. I told them no. When I fetched the bakkie they said they managed to bend them a bit and now the rattling has stopped. For how long I don't know. But I don't see them wearing out like they said.
Sent from my SM-G985F using Tapatalk
- pietpetoors
- Moderator
- Posts: 10650
- Joined: Thu May 17, 2007 9:12 pm
- Town: Langebaan
- Vehicle: 2.7 Hilux 4x4 DC
- Real Name: Pieter
- Club VHF Licence: X27
- Contact:
Re: Break dust covers
If it is the back plate / dust cover type of thing it cannot wear out. It either become loose or you accidentally knock and bend them while replacing pads.
That is the only dust covers I can think off on front brakes. Besides of course the rubber dust cover on the caliper piston but that is something that wont rattle.
The other thing that can cause a rattle on front brakes are the rattle clips, little spring steel clips that prevent the brake pads from rattling.
Easy to detect, when you touch the brakes and rattling stops, you know it are them clips. Those cost about R100 each but.
That is the only dust covers I can think off on front brakes. Besides of course the rubber dust cover on the caliper piston but that is something that wont rattle.
The other thing that can cause a rattle on front brakes are the rattle clips, little spring steel clips that prevent the brake pads from rattling.
Easy to detect, when you touch the brakes and rattling stops, you know it are them clips. Those cost about R100 each but.
Only Dead Fish Go With The Flow!
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
1999 Hilux 2.7i 4x4 Raider DC with 3.4 Prado V6. Rear diff-lock, Bull Bar and rock sliders, 31" Cooper ST Maxx, Snorkel, Alu-Canopy, VHF Motorolla radio, West Coast Rust, Mikem Suspension, Ball Joint Spacers in front and Mikem extended shackles at the rear, 25watt LED Spots
-
- High Range 2WD
- Posts: 21
- Joined: Tue May 09, 2017 1:42 pm
- Town: alberton
- Vehicle: 2013 hilux 3D4D 4x4 Auto
- Real Name: Brian
Re: Break dust covers
Yes it's the back plate dust cover thing. I thought they were talking nonsense when they said it's warn out. I thought they were loose and needed tightened, but they bent them a bit and now no more rattling.
Thanks for the response
Sent from my SM-G985F using Tapatalk
Thanks for the response
Sent from my SM-G985F using Tapatalk