2011 Toyota D4D 3.0 - I've split the R/H front calliper and damaged the o ring seal that comes in between, obviously went to Toyota but why would they want to sell you an o ring when they can sell you a new calliper for R 9000+. I got it to be driveable but it is leaking brake fluid and obviously need to get it fixed. Question I have before I take the calliper apart again, is there a company that stock these seals and would know what I talk about when requesting this seal? Does anyone have any measurements I can give to them?
Thanks in advance, Hennie
Calliper oring seal
- Mud Dog
- Moderator
- Posts: 29859
- Joined: Tue Apr 29, 2008 2:18 am
- Town: East London
- Vehicle: '90 SFA Hilux DC 4X4, Full OME, 110mm lift. Brospeed branch, 50mm ss freeflow exhaust. 30 x 9.5 Discoverer S/T's on Viper mags. L/R tank. (AWOL) '98 LTD 2.4 SFA, dual battery system. Dobinson suspension, LR tanks, 31" BF mud's.
- Real Name: Andy
- Club VHF Licence: HC103
Re: Calliper oring seal
You should be able to get from Beating Man. Just tell them it's for brake fluid. Probably cost you about 60 cents.
When your road comes to an end ...... you need a HILUX!.
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
Life is like a jar of Jalapeño peppers ... what you do today, might burn your ass tomorrow.
Don't take life too seriously ..... no-one gets out alive.
It's not about waiting for storms to pass. It's about learning to dance in the rain.
And be yourself ..... everyone else is taken!
- louis fourie
- LR4WD, Lockers, Crawler Gears
- Posts: 1767
- Joined: Tue Dec 30, 2008 3:17 pm
- Town: Pretoria
- Vehicle: 2003 Hilux Raider Facelift D/C 3.0 KZTE
- Real Name: Louis
- Club VHF Licence: X101
Re: Calliper oring seal
Try N1 4x4 as well
Sent from my HUAWEI VNS-L31 using Tapatalk
Sent from my HUAWEI VNS-L31 using Tapatalk
-
- LR4WD, Lockers, Crawler Gears
- Posts: 1484
- Joined: Mon May 07, 2012 12:33 pm
- Town: Pretoria
- Vehicle: Toyota Hilux Dakar 2.8 GD-6 DC 4X4
- Real Name: Marnus
- Location: Pretoria Oos
- Contact:
Re: Calliper oring seal
You are almost guaranteed to get the correct o-ring at Seal Centre in Moot Street. www.sealcentre.co.za
-
- Newbie
- Posts: 2
- Joined: Wed Jul 11, 2018 3:52 pm
- Town: Centurion
- Vehicle: Toyota Hilux
- Real Name: Hennie
Re: Calliper oring seal
Thanks. all will give these places a try and hopefully come right.
- niclemaitre
- LR 4WD Full Lockers
- Posts: 938
- Joined: Mon Jun 13, 2011 2:44 pm
- Town: Stellenbosch
- Vehicle: 99 IFS DC 4x4
- Real Name: Nic
- Location: Stellenbosch
Re: Calliper oring seal
You need Internal diameter, External diameter and height as well as type (O/single lip/double lip etc) and the fluid type it will be contact with
Happy trails
Nic
SFA '97 DC - affirmatively shopped
SFA '87 DC "Rooies" - sold
IFS '99 DC "Benny"
Nic
SFA '97 DC - affirmatively shopped
SFA '87 DC "Rooies" - sold
IFS '99 DC "Benny"